Document
Table of Contents

 
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
 
FORM 10-K
 
þ
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
 
For the fiscal year ended December 31, 2016

OR
¨
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
 
For the transition period from to
    
Commission File Number 001-08604
 
tisiimage1.jpg
TEAM, INC.
(Exact Name of Registrant as Specified in Its Charter)
 
Delaware
 
74-1765729
(State or Other Jurisdiction of
Incorporation or Organization)
 
(I.R.S. Employer
Identification No.)
 
 
13131 Dairy Ashford, Suite 600, Sugar Land, Texas
 
77478
(Address of Principal Executive Offices)
 
(Zip Code)
(281) 331-6154
(Registrant’s Telephone Number, Including Area Code)
 
Securities registered pursuant to Section 12(b) of the Act:
Title of Each Class
 
Name of Each Exchange on Which Registered
Common Stock, $0.30 par value
 
New York Stock Exchange
Securities registered pursuant to Section 12(g) of the Act: None
 
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  þ    No  ¨
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes  ¨    No  þ
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  þ    No  ¨
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  þ    No  ¨
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  ¨
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See definition of “accelerated filer and large accelerated filer” in Rule 12b-2 of the Exchange Act. (Check one):
Large accelerated filer
 
    ¨
  
Accelerated filer
 
    þ
Non-accelerated filer
 
    ¨(Do not check if a smaller reporting company)
  
Smaller reporting company
 
    ¨
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).    Yes  ¨    No  þ


Table of Contents

The aggregate market value of the voting stock held by non-affiliates on June 30, 2016 was approximately $627 million, determined using the closing price of shares of common stock on the New York Stock Exchange on that date of $24.83.
For purposes for the foregoing calculation only, all directors, executive officers, the Team, Inc. Salary Deferral Plan and Trust and known 5% or greater beneficial owners have been deemed affiliates.
The Registrant had 29,800,837 shares of common stock, par value $0.30, outstanding as of March 10, 2017.
Documents Incorporated by Reference
Portions of our Definitive Proxy Statement for the 2017 Annual Meeting of Stockholders are incorporated by reference into Part III of this report.
 


Table of Contents

ANNUAL REPORT ON FORM 10-K INDEX
 
 
 
 
ITEM 1.
 
 
 
 
 
 
 
 
 
 
 
ITEM 1A.
ITEM 1B.
ITEM 2.
ITEM 3.
ITEM 4.
 
 
 
 
 
 
 
ITEM 5.
ITEM 6.
ITEM 7.
ITEM 7A.
ITEM 8.
ITEM 9.
ITEM 9A.
 
ITEM 9B.
 
 
 
 
 
 
 
ITEM 10.
ITEM 11.
ITEM 12.
ITEM 13.
ITEM 14.
 
 
 
 
 
 
 
ITEM 15.
ITEM 16.
 
 
 
 
 
 
 


Table of Contents

Certain items required in Part III of this Annual Report on Form 10-K can be found in our 2017 Proxy Statement and are incorporated herein by reference. A copy of the 2017 Proxy Statement will be provided, without charge, to any person who receives a copy of this Annual Report on Form 10-K and submits a written request to Team, Inc., Attn: Corporate Secretary, 13131 Dairy Ashford, Suite 600, Sugar Land, Texas 77478.
PART I
 
ITEM 1.
BUSINESS
General Information
Introduction. Unless otherwise indicated, the terms “Team, Inc.,” “Team,” “the Company,” “we,” “our” and “us” are used in this report to refer to Team, Inc., to one or more of our consolidated subsidiaries or to all of them taken as a whole. We are incorporated in the State of Delaware and our company website can be found at www.teaminc.com. Our corporate headquarters is located at 13131 Dairy Ashford, Suite 600, Sugar Land, Texas, 77478 and our telephone number is (281) 331-6154. Our stock is traded on the New York Stock Exchange (“NYSE”) under the symbol “TISI.” On November 10, 2015, we announced a change of our fiscal year end to December 31 of each calendar year from May 31.
We are a leading provider of standard to specialty industrial services, including inspection, engineering assessment and mechanical repair and remediation required in maintaining high temperature and high pressure piping systems and vessels that are utilized extensively in the refining, petrochemical, power, pipeline and other heavy industries. We conduct operations in three segments: TeamQualspec Group (“TeamQualspec”) (formerly the Inspection and Heat Treating Services Group), TeamFurmanite Group (“TeamFurmanite”) (formerly the Mechanical Services Group) and Quest Integrity (“Quest Integrity”). Through the capabilities and resources in these three segments, we believe that Team is uniquely qualified to provide integrated solutions involving in their most basic form, inspection to assess condition, engineering assessment to determine fitness for purpose in the context of industry standards and regulatory codes and mechanical services to repair, rerate or replace based upon the client’s election. In addition, our Company is capable of escalating with the client’s needs—as dictated by the severity of the damage found and the related operating conditions—from standard services to some of the most advanced services and expertise available in the industry.
TeamQualspec provides standard and advanced non-destructive testing (“NDT”) services for the process, pipeline and power sectors, pipeline integrity management services, field heat treating services, as well as associated engineering and assessment services. These services can be offered while facilities are running (on-stream), during facility turnarounds or during new construction or expansion activities.
TeamFurmanite, our mechanical services segment, provides turnaround and on-stream services. Turnaround services are project-related and demand is a function of the number and scope of scheduled and unscheduled facility turnarounds as well as new industrial facility construction or expansion activities. The turnaround services TeamFurmanite provides include field machining, technical bolting, field valve repair, heat exchanger repair, and isolation test plugging services. On-stream services offered by TeamFurmanite represent the services offered while plants are operating and under pressure. These services include leak repair, fugitive emissions control and hot tapping.
Quest Integrity provides integrity and reliability management solutions for the process, pipeline and power sectors. These solutions encompass two broadly-defined disciplines: (1) highly specialized in-line inspection services for unpiggable process piping and pipelines using proprietary in-line inspection tools and analytical software; and (2) advanced condition assessment services through a multi-disciplined engineering team.
We offer these services globally through over 220 locations in 20 countries throughout the world with more than 7,400 employees. We market our services to companies in a diverse array of heavy industries which include the petrochemical, refining, power, pipeline, steel, pulp and paper industries, as well as municipalities, shipbuilding, original equipment manufacturers (“OEMs”), distributors, and some of the world’s largest engineering and construction firms.
Narrative Description of Business
TeamQualspec Group:
TeamQualspec offers standard to specialty inspection services as well as heat treating services. Heat treating services are generally associated with turnaround or project activities. A description of these services is as follows:
Non-Destructive Evaluation and Testing Services. Machined parts and industrial structures can be complex systems that experience extreme loads and fatigue during their lifetime. Our Non-Destructive Evaluation (“NDE”), or Non-Destructive

1

Table of Contents

Testing (“NDT”), enables the inspection of these components without permanently altering the equipment. It is a highly valuable technique that is often used to validate the integrity of materials, detect instabilities, discover performance outside of tolerances, identify failed components, or highlight an inadequate control system. Inspection services frequently require industry recognized training and certification processes. We maintain training and certification programs, which are designed to meet or exceed industry standards. As assets continue to age and compliance regulations advance, inspection techniques are playing a critical role in fit-for-life service assessments.
Radiographic Testing. Radiographic Testing (“RT”) is used to detect discontinuities in ferrous and nonferrous castings, welds or forgings using X-ray or gamma ray radiation. RT reveals both external and internal defects, internal assembly details and changes in thickness. Our licensed technicians utilize conventional, computed and real-time radiography testing techniques depending upon the complexity and needs of our customers.
Ultrasonic Testing. Ultrasonic Testing (“UT”) uses high frequency ultrasonic waves to detect surface breaking and internal imperfections, measure material thickness and determine acceptance or rejection of a test object based on a reference code or standard. We offer ten different types of UT methods, including traditional scans as well as automated and high speed ultrasonic Electro Magnet Acoustic Transducer testing. Each method is utilized to meet a specific material or process application requirement.
Magnetic Particle Inspection. Magnetic Particle Inspection is an NDT process for detecting surface and slightly subsurface discontinuities in ferroelectric materials such as iron, nickel, cobalt, and some of their alloys. The process puts a magnetic field into the test object. When the part is magnetized, flaws perpendicular to the magnetic field direction cause flux leakage. If a lapse or a crack is present, the magnetic particles will be attracted to the flawed area, providing our technician with what is called an indication. Our technician will then evaluate the indication to assess the location, size, shape and extent of these imperfections.
Liquid Penetrant Inspection. Liquid Penetrant Inspection is one of the most widely used NDE/ NDT methods. Its popularity can be attributed to two main factors: its relative ease of use and its flexibility. Liquid Penetrant Inspection can be used to inspect almost any material. At Team, we utilize Liquid Penetrant Inspection to detect surface discontinuities in both ferromagnetic and non-ferromagnetic materials. In castings and forgings, there may be cracks or leaks in new products or fatigue cracks in in-service components.
Positive Material Identification. Positive Material Identification (“PMI”) quickly and accurately identifies the composition of more than 100 different engineering alloys onsite. Team can perform PMI on virtually any size or shape of pipe, plate, weld, welding materials, machined parts or castings.
Electromagnetic Testing. Electromagnetic Testing applies to a family of test methods that use magnetism and electricity to detect or measure cracks, flaws, corrosion or heat damage in conductive materials. Magnetic properties and geometric analysis are used to determine the best technique to identify defects. Our electromagnetic services enable our technicians to evaluate small cracks, pits, dents and general thinning in tubing with small diameters, large steel surfaces such as storage tank floors, and everything in between.
Alternating Current Field Measurement. Originally developed for inspection of fatigue cracking, our Alternating Current Field Measurement (“ACFM”) is an advanced technique for detecting surface cracks and pinpointing the location, length and depth of the defect. Our ACFM works through paint and coatings and in a wide range of temperatures. Results are automatically recorded and accepted by certification authorities.
Eddy Current Testing. Eddy Current Testing (“ET”) is ideal for nonferrous materials such as heat exchanger tubes, condensers, boilers, tubing and aircraft surfaces. Team’s ET uses electromagnetic induction to detect flaws in conductive materials, displaying the presence of very small cracks, pits, dents and general thinning.
Long-Range Guided Ultrasonics. Guided wave inspection is a method of ultrasonic testing that enables the detection and location of pipe defects above and below ground without disruption of service. This technique only requires a small area of excavation to perform the testing where applicable. Guided ultrasonics sends a bilateral signal over hundreds of feet allowing long ranges of piping to be inspected at one time.
Phased Array Ultrasonic Testing. Phased Array Ultrasonics (“PAUT”) provides sharper detection capability for off-angle cracks and is capable of displaying multiple presentations simultaneously. PAUT applies computer-controlled excitation to individual elements in a multi-element probe. By varying the timing of the excitation, the sound beam can be swept through a range of angles. The shape of the beam may also be modified to a specific focal distance or spot.
Tank Inspection and Management Programs. Our wholly-owned subsidiary, TCI Services, Inc. (“TCI”), is a storage tank management company that performs inspections, engineering and repair services across the U.S. for above ground storage tanks. Backed by Team’s in-house engineering, documentation and certification services – including API 653

2

Table of Contents

evaluations – TCI’s on-site tank inspections, repair and maintenance services help keep customers’ tanks fully operational and compliant with stringent industry standards.
Rope Access. We provide a range of innovative and cost-effective solutions to suit the customer’s individual requirements for inspection and maintenance services to the energy and industrial markets. Our rope access solutions allow for work to be carried out more quickly than traditional methods using scaffolding, keeping costs and job duration to a minimum. We provide these services under full accreditation by the Industrial Rope Access Trade Association, whose guidelines are recognized by the industry as the safest method of working at height.
Mechanical Integrity Services. Maintaining the integrity of equipment is more than simply performing inspections. A well-implemented Mechanical Integrity (“MI”) program involves multiple components that improve the safety and reliability of a facility’s equipment. Our MI programs ensure the continued integrity and fitness for service of piping systems, pressure vessels, tanks and related components. Our mechanical integrity engineers are well versed in pertinent codes and standards of the Occupational Safety and Health Administration’s process safety management and U.S. Environmental Protection Agency’s (“EPA”) risk management program regulations.
Field Heat Treating Services. Field Heat Treating Services include electric resistance and gas-fired combustion, primarily utilized by industrial customers to enhance the metallurgical properties of their process piping and equipment. Electric resistance heating is the transfer of high energy power sources through attached heaters to the plant component to preheat weld joints, to remove contaminants and moisture prior to welding, post-weld heat treatments and to relieve metal thermal stresses induced by the welding process. Specialty heat treating processes are performed using gas-fired combustion on large pressure vessels for stress relieving to bake specialty paint coatings and controlled drying of abrasion and temperature resistant refractories. Special high frequency heating, commonly called induction heating, is used for expanding metal parts for assembly or disassembly, expanding large bolting for industrial turbines and stress relieving projects which is cost prohibitive for electric resistance or gas-fired combustion.
TeamFurmanite Group:
TeamFurmanite offers standard to specialty services as follows within both on-stream and turnaround/project-related environments as follows:
Leak Repair Services. Our leak repair services consist of on-stream repairs of leaks in pipes, valves, flanges and other parts of piping systems and related equipment. Our on-stream repairs utilize composite repair, drill and tap repair, and both standard and custom-designed clamps and enclosures for piping systems. We use specially developed techniques, sealants and equipment for repairs. Many of our repairs are furnished as interim measures which allow plant systems to continue operating until more permanent repairs can be made during plant shut downs. Our leak repair services involve inspection of the leak by our field crew who records pertinent information about the faulty part of the system and transmits the information to our engineering department for determination of appropriate repair techniques. Repair materials such as clamps and enclosures are custom designed and manufactured at our ISO-9001 certified manufacturing centers and delivered to the job site. We maintain an inventory of raw materials and semi-finished clamps and enclosures to reduce the time required to manufacture the finished product.
Fugitive Emissions Control Services. We provide fugitive volatile organic compound (“VOC”) emission leak detection services that include identification, monitoring, data management and reporting primarily for the chemical, refining and natural gas processing industries. These services are designed to monitor and record VOC emissions from specific process equipment and piping components as required by environmental regulations and customer requests, typically assisting the customer in enhancing an ongoing maintenance program and/or complying with present and/or future environmental regulations. We provide specialty trained technicians in the use of portable organic chemical analyzers and data loggers to measure potential leaks at designated plant components maintained in customer or our proprietary databases. The measured data is used to prepare standard reports in compliance with the EPA and local regulatory requirements. We also provide enhanced custom-designed reports to customer specifications.
Hot Tapping Services. Our hot tapping services consist of a full range of hot tapping, Line-stopTM and Freeze-stopTM services with capabilities for up to 48” diameter pipelines. Hot tapping services involve utilizing special equipment to cut a hole in a pressurized pipeline so that a new branch pipe can be connected onto the existing pipeline without interrupting operations. Line-stopTM services permit the line to be depressurized downstream so that maintenance work can be performed on the piping system. We typically perform these services by mechanically cutting into the pipeline similar to a hot tap and installing a special plugging device to stop the process flow. The Hi-stopTM is a proprietary procedure that allows stopping of the process flow in extreme pressures and temperatures. In some cases, we may use a line freezing procedure by injecting liquid nitrogen into installed special external chambers around the pipe to stop the process flow. Inflatable bag stops are used

3

Table of Contents

when a pipe is out of round or inside surface conditions of the pipe prevent a standard line stop. It can also be used to back up a line stop. A small hot tap is made into a pipe and an inflatable pipe plug is inserted into the pipe to allow the plug to stop the flow in the pipe. Additionally, we provide innovative line stop applications for unique service applications to meet customers’ needs.
Field Machining Services and Technical Bolting Services. We use portable machining equipment to repair or modify machinery, equipment, vessels and piping systems not easily removed from a permanent location. As opposed to conventional machining processes where the work piece rotates and the cutting tool is fixed, in field machining, the work piece remains fixed in position and the cutting tool rotates. Other common descriptions for this service are on-site or in-place machining. Field machining services include flange facing, pipe cutting, line boring, journal turning, drilling and milling. We provide customers technical bolting as a complementary service to field machining during plant shut downs or maintenance activities. These services involve the use of hydraulic or pneumatic equipment with industry standard bolt tightening techniques to achieve reliable and leak-free connections following plant maintenance or expansion projects. Additional services include bolt disassembly and hot bolting, which is a technique to remove and replace a bolt while in service and hot.
Valve Repair Services. We perform on-site repairs to manual and control valves and pressure and safety relief valves as well as specialty valve actuator diagnostics and repair. We are certified and authorized to perform testing and repairs to pressure and safety relief valves by The National Board of Boiler and Pressure Vessel Inspectors. This certification requires specific procedures, testing and documentation to maintain the safe operation of these essential plant valves. We provide special transportable trailers to the plant site which contain specialty machines to manufacture valve components without removing the valve from the piping system. In addition, we provide preventive maintenance programs for VOC specific valves and valve data management programs.
Field Welding. We perform certified manual, semi-automatic and fully automated machine welding services in a variety of specialty industrial applications. All Team welders are certified to applicable American Society of Mechanical Engineers (“ASME”) code and we are authorized by the National Board of Boiler and Pressure Vessel Inspectors for the repair of nuclear components, boilers and other pressure-containing components.
Heat Exchanger and Maintenance Services. We provide turnkey heat exchanger services that allow for blind to blind disassembly and re-assembly. Utilizing our expanding fleet of bundle extractors that allow us to pull and push the tube bundles, as well as field machining and bolting equipment, we can make complete repairs to minimize downtime by using one contractor. A complete service allows us to unbolt the exchanger heads and remove the tube bundle for inspection and repair. Team is certified by The National Board of Boiler and Pressure Vessel Inspectors to make welded code repairs when necessary to the many components that make up the assembly. Based on the inspection, the bundle tubes can be replaced or plugged. Assembly of the exchanger is documented by our rigid quality control process providing documented procedures and final “as assembled” bolted values.
Isolation and Test Plug Services. We install isolation plugs to provide a mechanical block of flammable atmosphere to allow for pipe cutting and welding without having to purge the entire piping system. The plugs are mechanically expanded to seal on the inside pipe surface and provide a venting system to prevent pressure from building up in the piping system while the system is opened. Test plugs are used to verify the integrity of welded joints by providing sealing surfaces on both sides of the weld and pressuring the void cavity in between. The test plugs allow the customer to comply with the ASME hydrostatic test requirements for welded joints without having to pressurize the whole system which may result in shutdown of other systems or environmental issues with the test medium.
Valve Insertion Services. We offer professional installation services for our patented InsertValveTM. The valve installs under pressure, eliminating the need for line shut downs in the event of planned or emergency valve cut-ins. Designed for a wide range of line sizes and types, the InsertValveTM wedge gate sits on the valve body, not the pipe bottom. This unique feature prevents the seat from coming into contact with the cut pipe edges to significantly extend valve life. If a repair is ever needed, we believe it is the only valve on the market that can be repaired under pressure.
Quest Integrity:
Quest Integrity offers integrity management solutions to the energy industry in the form of advanced quantitative inspection and engineering assessment services and products. Quest Integrity’s advanced quantitative inspection services utilize proprietary non-destructive testing and examination (NDT/NDE) instrumentation to provide technology-enabled in-line inspections of fired heaters, piping systems and steam reformers, primarily to the process, pipeline and power industries. Additionally, Quest Integrity offers engineering assessment services enabled by proprietary software and a variety of analytical models. Effective July 1, 2013, Quest Integrity became a stand-alone reportable segment of Team.

4

Table of Contents

Quest Integrity’s major service offerings are described as follows:
Furnace Tube Inspection System. Furnace Tube Inspection System (“FTISTM”) in-line inspection service provides an untethered 360-degree 100% coverage ultrasonic inspection of the internal and external surfaces of serpentine coils of fired heaters, which are found in refineries. FTISTM allows us to detect and quantify internal/external pipe/tube wall loss, deformation and fouling and thereby identify weak points in such heaters in order to provide customers with timely, actionable information to better manage their infrastructure.
InVistaTM. Our proprietary InVistaTM in-line inspection service provides an untethered 360-degree 100% coverage ultrasonic inspection of the internal and external surfaces of pipelines that are considered “unpiggable” or too challenging to inspect by traditional inspection methods, due to a number of factors. InVistaTM allows us to detect and quantify pipe/tube internal/external wall loss, deformation, pitting and fouling in such pipelines. Our InVistaTM service also provides an integrated fitness-for-service report which forecasts remaining life of the pipeline and displays the information in a highly intuitive format, providing an integrated solution set for pipeline customers.
Pipeline Integrity Management. We offer turn-key Pipeline Integrity Management services, including project management, integrity engineering and integrity management development services, in-line inspection support, land surveying, and materials equipment selection and procurement. We offer these resources on an integrated basis with our InVistaTM and HYDRATM in-line inspection services and engineering assessment capabilities, or individually as applicable.
Engineering Assessment Services. Using proprietary software and a variety of analytical models, we offer a variety of advanced engineering assessment services to customers in the process, power, pipeline, and petrochemical industries including fitness-for-service, computational mechanics, failure analysis, pipeline analysis, risk-based asset management, and materials consulting.
Acquisitions
In June 2016, we acquired a mechanical furnace and pipe cleaning business in Europe, Turbinate International B.V. (“Turbinate”) for approximately $8 million. Recognized as a service leader in the European market, Turbinate specializes in de-coking and cleaning of fired heaters and unpiggable refinery assets as well as mechanical cleaning of furnaces and pipes from two to 18 inches by means of pigging, endoscopy and ultra sound inspection services. Turbinate is located in Vianen, the Netherlands. Turbinate is reported in the Quest Integrity segment.
In April 2016, we acquired two related businesses in Europe: Quality Inspection Services (“QIS”) and TiaT Europe (“TiaT”) for a total of approximately $9 million. QIS is an NDT inspection company and TiaT is an NDT training school and consultancy and engineering company recognized as a specialist in aerospace inspections. Both companies are located in Roosendaal, the Netherlands. The businesses add about 65 employees to our organization in Europe and serve steel construction, ship repair, off-shore and storage tank customers, as well as the aerospace industry. QIS is the fourth largest NDT inspection company in the Netherlands and represents Team’s first inspection operation outside of North America. QIS and TiaT are reported in the TeamQualspec segment.
In November 2015, Team and Furmanite Corporation (“Furmanite”) entered into an Agreement and Plan of Merger (the “Merger Agreement”) under which we acquired all the outstanding shares of Furmanite in a stock transaction. Under the terms of the Merger Agreement, Furmanite shareholders received 0.215 shares of Team common stock for each share of Furmanite common stock they owned. The merger was completed on February 29, 2016 at a value of approximately $282.3 million which included the payoff, immediately prior to closing, of approximately $70.8 million in Furmanite debt. The combination doubled the size of Team’s mechanical services capabilities and established a deeper, broader talent and resource pool that better supports customers across standard and specialty mechanical services. In addition, our expanded capability and capacity offers an enhanced single-point of accountability and flexibility in addressing some of the most critical needs of clients; whether as individual services or as part of an integrated specialty industrial services solution. The purchase price allocation included net working capital of $143.9 million, $63.3 million in fixed assets, $89.0 million in intangibles, $91.4 million of non-current deferred tax liabilities, $13.5 million of defined benefit pension liabilities with $89.6 million allocated to goodwill. Our consolidated results include the activity of Furmanite beginning on the acquisition date of February 29, 2016. Included in the Furmanite acquisition was a process management inspection services business serving contractors and operators participating primarily in the midstream oil and gas market in the United States. Upon acquisition, we determined that this business was not a strategic fit for Team and shortly thereafter began marketing the business to prospective buyers. We completed the sale of this operation in December 2016. The operating results of this business are reported as discontinued operations in our consolidated financial statements.

5

Table of Contents

In July 2015, we acquired 100% of the membership interests in Qualspec Group LLC (“Qualspec”) for total cash consideration of $255.5 million. Qualspec is a leading provider of non-destructive testing NDT services in the United States, with significant operations in the West Coast, Gulf Coast and Mid-Western areas of the country. Qualspec adds strength to our resident refinery inspection programs with major customer relationships across the U.S., and to add to our already strong capabilities in advanced inspection services, rope access services and the delivery of innovative technologies to our customers. The purchase of Qualspec was financed through borrowings under our banking credit facility. The purchase price allocation included net working capital of $16.3 million, $15.5 million in fixed assets, $78.1 million in intangibles, $3.0 million of non-current deferred tax liability, with $148.5 million allocated to goodwill. Our consolidated results include the activity of Qualspec beginning on the acquisition date of July 7, 2015 in the TeamQualspec segment.
In June 2015, we purchased DK Amans Valve, an advanced valve leader located in Long Beach, California, with a portfolio of projects from various sectors including oil and gas refining, pipelines and power generation for a total consideration of $12.3 million, net of cash acquired of $0.1 million. The purchase price included net working capital of $3.0 million, $0.6 million in fixed assets and $8.8 million in intangibles that includes $2.5 million allocated to goodwill. The purchase price allocation included contingent consideration valued at $1.8 million. The contingent consideration is based upon the achievement of certain performance targets over a three-year period for an additional amount of up to $4.0 million. DK Amans Valve is reported in the TeamFurmanite segment.
In August 2014, we purchased a valve repair company in the U.K. for total consideration of $3.1 million, net of cash acquired of $0.2 million, including estimated contingent consideration of $0.3 million. Our purchase price allocation resulted in $2.1 million being allocated to fixed assets and net working capital and $1.0 million being applied to goodwill and intangible assets.
In July 2013, we purchased a leading provider of industrial rope access services, for total consideration of approximately $12.9 million including net working capital of $1.3 million and $11.6 million allocated to goodwill and intangible assets. We estimate $9.2 million of the goodwill recognized to be deductible for tax purposes. The purchase price allocation included contingent consideration valued at $1.9 million. The contingent consideration is based upon the achievement of operating earnings thresholds over a six-year period for an amount of up to $4.0 million.
Marketing and Customers
Our industrial services are marketed principally by personnel based at our service locations. We believe that these service locations are situated to facilitate timely responses to customer needs with on-call expertise, which is an important feature of selling and providing our services. Our array of integrated services also allows us to benefit from the procurement trends of many of our customers who are seeking reductions in the number of contractors and vendors in their facilities. No single customer accounted for 10% or more of consolidated revenues during the year ended December 31, 2016, the seven months ended December 31, 2015 or in either of the years ended May 31, 2015 and 2014.
Generally, customers are billed on a time and materials basis, although some work may be performed pursuant to a fixed-price bid. Services are usually performed pursuant to purchase orders issued under written customer agreements. While most purchase orders provide for the performance of a single job, some provide for services to be performed on a run and maintain basis. Substantially all our agreements and contracts may be terminated by either party on short notice. The agreements generally specify the range of services to be performed and the hourly rates for labor. While many contracts cover specific plants or locations, we also enter into multiple-site regional or national contracts which cover multiple plants or locations.
Geographic Areas
For a discussion and breakdown of revenues by geographic area, see Note 14 to the consolidated financial statements.
Seasonality
We experience some seasonal fluctuations. Historically, the refining industry has scheduled plant shutdowns (commonly referred to as “turnarounds”) for the fall and spring seasons. The timing of large turnarounds can significantly impact our revenues.
Employees
At December 31, 2016, we had approximately 7,400 employees in our worldwide operations. Our employees in the U.S. are predominantly non-unionized. Most of our Canadian employees and certain employees outside of North America, primarily

6

Table of Contents

Europe, are unionized. There have been no employee work stoppages to date and we believe our relations with our employees and their representative organizations are fair and productive.
Regulation
A significant portion of our business activities are subject to foreign, federal, state and local laws and regulations. These regulations are administered by various foreign, federal, state and local health and safety and environmental agencies and authorities, including the Occupational Safety and Health Administration of the U.S. Department of Labor and the EPA. Failure to comply with these laws and regulations may involve civil and criminal liability. From time to time, we are also subject to a wide range of reporting requirements, certifications and compliance as prescribed by various federal and state governmental agencies that include, but are not limited to, the EPA, the Nuclear Regulatory Commission, the Chemical Safety Board, the Department of Transportation and the Federal Aviation Administration. Expenditures relating to such regulations are made in the normal course of our business and are neither material nor place us at any competitive disadvantage. We do not currently expect that compliance with such laws and regulations will require us to make material expenditures.
From time to time, during the operation of our environmental consulting and engineering services, the assets of which were sold in 1996, we handled small quantities of certain hazardous wastes or other substances generated by our customers. Under the Comprehensive Environmental Response, Compensation and Liability Act of 1980 (the “Superfund Act”), the EPA is authorized to take administrative and judicial action to either cause parties who are responsible under the Superfund Act for cleaning up any unauthorized release of hazardous substances to do so, or to clean up such hazardous substances and to seek reimbursement of the costs thereof from the responsible parties, who are jointly and severally liable for such costs under the Superfund Act. The EPA may also bring suit for treble damages from responsible parties who unreasonably refuse to voluntarily participate in such a clean-up or funding thereof. Responsible parties include anyone who owns or operates the facility where the release occurred (either currently and/or at the time such hazardous substances were disposed of), or who by contract arranges for disposal, treatment, transportation for disposal or treatment of a hazardous substance, or who accepts hazardous substances for transport to disposal or treatment facilities selected by such person from which there is a release. We believe that our risk of liability is minimized since our handling consisted solely of maintaining and storing small samples of materials for laboratory analysis that are classified as hazardous. Due to its prohibitive costs, we accordingly do not currently carry insurance to cover liabilities which we may incur under the Superfund Act or similar environmental statutes.
Intellectual Property
We hold various patents, trademarks, trade secrets and licenses, which have not historically been material to our consolidated business operations. However, Quest Integrity has significant trade secrets and intellectual property pertaining to its in-line inspection tool technologies. This subsidiary was acquired in the fiscal year ended 2011 and a significant amount of the purchase price was allocated to these intangible assets.
Competition
In general, competition stems from a large number of other outside service contractors. More than 100 different competitors are currently active in our markets. We believe we have a competitive advantage over most service contractors due to the quality, training and experience of our technicians, our nationwide and increasingly international service capability, our broad range of services, and our technical support and manufacturing capabilities supporting the service network. However, there are other competitors that may offer a similar range of coverage or services and include, but are not limited to, Acuren Group, Inc., Guardian Compliance, Mistras Group, Inc. and T.D. Williamson, Inc.
Available Information
As a public company, we are required to file periodic reports with the Securities and Exchange Commission (the “SEC”) within established deadlines. Any document we file with the SEC may be viewed or copied at the SEC’s Public Reference Room at 100 F Street, N.E., Washington, D.C. 20549. Additional information regarding the Public Reference Room can be obtained by calling the SEC at (800) SEC-0330. Our SEC filings are also available to the public through the SEC’s website located at www.sec.gov. Our internet website address is www.teaminc.com. Information contained on our website is not part of this Annual Report on Form 10-K. Our annual reports on Form 10-K, quarterly reports on Form 10-Q, Proxy Statements and current reports on Form 8-K filed with (or furnished to) the SEC are available on our website, free of charge, as soon as reasonably practicable after we file or furnish such material. We also post our code of ethical conduct, our governance principles, our social responsibility policy and the charters of our Board of Directors’ (the “Board”) committees on our website. Our governance documents are available in print to any stockholder that submits a written request to Team, Inc., Attn: Corporate Secretary, 13131 Dairy Ashford, Suite 600, Sugar Land, Texas 77478.

7

Table of Contents

ITEM 1A.
RISK FACTORS
Our business, financial condition or results of operations could be materially adversely affected by any of the risks and uncertainties described below.
The economic environment may affect our customers’ demand for our services. Future economic uncertainty may reduce the availability of liquidity and credit and, in many cases, reduce demand for our customers’ products. Disruption of the credit markets could also adversely affect our customers’ ability to finance on-going maintenance and new projects, resulting in contract cancellations or suspensions, and project delays. An extended or deep recession may result in plant closures or other contractions in our customer base. These factors may also adversely affect our ability to collect payment for work we have previously performed. Furthermore, our ability to expand our business could be limited if, in the future, we are unable to increase our credit capacity under favorable terms or at all. Such disruptions, should they occur, could materially impact our results of operations, financial position or cash flows.
Our revenues are heavily dependent on certain industries. Sales of our services are dependent on customers in certain industries, particularly the refining and petrochemical industries. As experienced in the past, and as expected to occur in the future, downturns characterized by diminished demand for services in these industries could have a material impact on our results of operations, financial position or cash flows. Certain of our customers have employees represented by unions and could be subject to temporary work stoppage which could impact our activity level.
We sell our services in highly competitive markets, which places pressure on our profit margins and limits our ability to maintain or increase the market share of our services. Our competition generally stems from other outside service contractors, many of whom offer a similar range of services. Future economic uncertainty could generally reduce demand for industrial services and thus create a more competitive bidding environment for new and existing work. No assurances can be made that we will continue to maintain our pricing model and our profit margins or increase our market share.
No assurances can be made that we will be successful in maintaining or renewing our contracts with our customers. A significant portion of our contracts and agreements with customers may be terminated by either party on short notice. Although we actively pursue the renewal of our contracts, we cannot assure that we will be able to renew these contracts or that the terms of the renewed contracts will be as favorable as the existing contracts. If we are unable to renew or replace these contracts, or if we renew on less favorable terms, we may suffer a material reduction in revenue and earnings.
No assurances can be made that we will be successful in hiring or retaining members of a skilled technical workforce. We have a skilled technical workforce and an industry recognized technician training program for each of our service lines that prepares new employees as well as further trains our existing employees. The competition for these individuals is intense. The loss of the services of a number of these individuals, or failure to attract new employees, could adversely affect our ability to perform our obligations on our customers’ projects or maintenance and consequently could negatively impact the demand for our products and services.
Unsatisfactory safety performance can affect customer relationships, result in higher operating costs and negatively impact our ability to hire and retain a skilled technical workforce. Our workers are subject to the normal hazards associated with providing services at industrial facilities. Even with proper safety precautions, these hazards can lead to personal injury, loss of life, destruction of property, plant and equipment, lower employee morale and environmental damage. We are intensely focused on maintaining a strong safety environment and reducing the risk of accidents to the lowest possible level. Poor safety performance may limit or eliminate potential revenue streams from many of our largest customers and may materially increase our future insurance and other operating costs. Although we maintain insurance coverage, such coverage may be inadequate to protect us from all expenses related to these risks.
We are subject to risks associated with indebtedness under our banking credit facility, including the risk of failure to maintain compliance with financial covenants, the risk of being unable to make interest and principal payments when due and the risk of rising interest rates. Under our credit agreement, which we renewed in July 2015 (the “Credit Facility”), we are required to maintain compliance with certain financial covenants, as discussed in “Liquidity and Capital Resources” in Part II, Item 7 of this Form 10-K. As of December 31, 2016, we are in compliance with these covenants. With respect to the covenant not to exceed a maximum ratio of consolidated funded debt to consolidated EBITDA (the “Total Leverage Ratio”, as defined in our Credit Facility agreement), our ratio stood at 4.19 to 1.00 as of December 31, 2016, compared to the maximum permitted ratio as of such date of 4.50 to 1.00. Under the Credit Facility, the maximum permitted ratio decreases to 4.25 to 1.00 as of March 31, 2017 and June 30, 2017, 3.75 to 1.00 as of September 30, 2017 and thereafter decreases by 0.25 to 1.00 every quarter until it reaches 3.00 to 1.00. While we are in compliance with our financial covenants as of December 31, 2016, management continues to execute various initiatives designed to reduce the Company’s obligations outstanding under the

8

Table of Contents

Credit Facility and improve operating cash flows. However, there can be no assurance that these actions will be successful or that we will be able to maintain compliance with the financial covenants as of any future date. Our future compliance is dependent upon our future operating performance and future financial condition, both of which are subject to various risks and uncertainties, such as those risks and uncertainties described in this Item 1A.

We rely primarily on cash flows from our operations to make required interest and principal payments on our debt under the Credit Facility. If we are unable to generate sufficient cash flows from our operations, we may be unable to pay interest and principal obligations on our debt when they become due. Failure to comply with these obligations or failure to comply with the financial covenants discussed above could result in an event of default, which would permit our lenders to accelerate the repayment of the debt. If our lenders accelerate the repayment of debt, there is no assurance that we could refinance such debt on terms favorable to us or at all. Also, our debt under the Credit Facility bears interest at variable rates and therefore we are exposed to the risk of rising market interest rates, which could adversely impact our cash flows and increase our interest expense. Further, our Credit Facility restricts our ability to, among other items, incur additional indebtedness, engage in mergers, acquisitions and dispositions and alter the business conducted by the Company and its subsidiaries. These restrictions could adversely affect our ability to operate our businesses and may limit our ability to take advantage of potential business opportunities as they arise.
An impairment of our goodwill and intangible assets could have a material adverse impact on our results of operations and financial condition. As a result of past acquisitions, goodwill and intangible assets comprise a substantial portion of our total assets. As of December 31, 2016, our goodwill and intangible assets totaled $355.8 million and $176.1 million, respectively. We assess or test goodwill and intangible assets for impairment at least annually in accordance with Generally Accepted Accounting Principles in the U.S. (“GAAP”). A decrease in our market capitalization or profitability or unfavorable changes in market, economic and industry conditions all would increase the risk of impairment. If we determine an impairment exists, we may be required to recognize significant impairment charges, which could materially and adversely impact our results of operations and financial condition.
The implementation of a new enterprise resource planning (“ERP”) system may disrupt the Company’s operations or its system of internal controls. At the end of 2013, we initiated the design and implementation of a new ERP system, which is expected to be substantially installed by the end of 2017. As this system continues to be deployed throughout the Company, delays or difficulties may be encountered in effectively and efficiently processing transactions and conducting business operations until personnel are familiar with all appropriate aspects and capabilities of the upgraded systems.
The Company’s operations and information systems are subject to cybersecurity risks. Team continues to increase its dependence on digital technologies to conduct its operations. Many of the Company’s files are digitized and more employees are working in almost paperless and remote environments. We have also outsourced certain information technology development, maintenance and support functions. As a result, the Company may be exposed to potentially severe cyber incidents at both its internal locations and outside vendor locations that could result in a theft of intellectual property and/or disruption of its operations for an extended period of time resulting in the loss of critical data and in higher costs to correct and remedy the effects of such incidents, although no such material incidents have occurred to date to the Company’s knowledge.
Our operations and properties are subject to extensive governmental regulation under environmental laws. Environmental laws and regulations can impose substantial sanctions for violations or operational changes that may limit our services. We must conform our operations to applicable regulatory requirements and adapt to changes in such requirements in all locations in which we operate. These actions may increase the overall costs of providing our services. Some of our services involve handling or monitoring highly regulated materials, including VOCs or hazardous wastes. Environmental laws and regulations generally impose limitations and standards for regulated materials and require us to obtain permits and comply with various other requirements. The improper characterization, handling, disposal or monitoring of regulated materials or any other failure by us to comply with increasingly complex and strictly enforced federal, state and local environmental laws and regulations or associated environmental permits could subject us to the assessment of administrative, civil and criminal penalties, the imposition of investigatory or remedial obligations, or the issuance of injunctions that could restrict or prevent our ability to operate our business and complete contracted services. A defect in our services or faulty workmanship could result in an environmental liability if, as a result of the defect or faulty workmanship, a contaminate is released into the environment.
We currently maintain liability insurance to limit any potential loss, but there can be no assurance that our insurance will fully protect us against a claim or loss. We perform services in hazardous environments on or around high-pressure, high temperature systems and our employees are exposed to a number of hazards, including exposure to hazardous materials, explosion hazards and fire hazards. Incidents that occur at these large industrial facilities or systems, regardless of fault, may be catastrophic and adversely impact our employees and third parties by causing serious personal injury, loss of life, damage to

9

Table of Contents

property or the environment, and interruption of operations. Our contracts typically require us to indemnify our customers for injury, damage or loss arising out of our presence at our customers’ location, regardless of fault, or the performance of our services and provide for warranties for materials and workmanship. We may also be required to name the customer as an additional insured under our insurance policies. We maintain insurance coverage against these and other risks associated with our business. Due to the high cost of general liability coverage, we maintain insurance with a self-insured retention of $3.0 million per occurrence. This insurance may not protect us against liability for certain events, including events involving pollution, product or professional liability, losses resulting from business interruption or acts of terrorism or damages from breach of contract by the Company. We cannot assure you that our insurance will be adequate in risk coverage or policy limits to cover all losses or liabilities that we may incur. Moreover, in the future, we cannot assure that we will be able to maintain insurance at levels of risk coverage or policy limits that we deem adequate. Any future damages caused by our products or services that are not covered by insurance or are in excess of policy limits could have a material adverse effect on our results of operations, financial position or cash flows.
We are involved and are likely to continue to be involved in legal proceedings, which will increase our costs and, if adversely determined, could have a material effect on our results of operations, financial position or cash flows. We are currently a defendant in legal proceedings arising from the operation of our business and it is reasonable to expect that we will be named in future actions. Most of the legal proceedings against us arise out of the normal course of performing services at customer facilities, and include claims for workers’ compensation, personal injury and property damage. Legal proceedings can be expensive to defend and can divert the attention of management and other personnel for significant periods of time, regardless of the ultimate outcome. An unsuccessful defense of a liability claim could have an adverse effect on our business, results of operations, financial position or cash flows.
Economic, political and other risks associated with international operations could adversely affect our business. A portion of our operations are conducted and located outside the United States, and accordingly, our business is subject to risks associated with doing business internationally, including changes in foreign currency exchange rates, instability in political or economic conditions, difficulty in repatriating cash proceeds, differing employee relations, differing regulatory environments, trade protection measures, and difficulty in administering and enforcing corporate policies which may be different than the normal business practices of local cultures. In many foreign countries, particularly in those with developing economies, it is common to engage in business practices that are prohibited by U.S. and foreign anti-corruption regulations applicable to us such as the U.S. Foreign Corrupt Practices Act and the United Kingdom Bribery Act. Our international business operations may include projects in countries where corruption is prevalent. Although we have, and continue to, implement policies and procedures designed to ensure compliance with these laws, there can be no assurance that all of our employees, contractors or agents, including those representing us in countries where practices which violate such anti-corruption laws may be customary, will not take actions in violation of our policies and procedures. Any violation of foreign or U.S. laws by our employees, contractors or agents, even if such violation is prohibited by our policies and procedures, could have a material adverse effect on our results of operations, financial position or cash flows.
Our growth strategy entails risk for investors. We intend to continue to pursue acquisitions in, or complementary to, the specialty maintenance and construction services industry to complement and diversify our existing business. We may not be able to continue to expand our market presence through acquisitions, and any future acquisitions may present unforeseen integration difficulties or costs. From time to time, we make acquisitions of other businesses that enhance our services or geographic scope. No assurances can be made that we will realize the cost savings, synergies or revenue enhancements that we may anticipate from any acquisition, or that we will realize such benefits within the time frame that we expect. If we are not able to address the challenges associated with acquisitions and successfully integrate acquired businesses, or if our integrated product and service offerings fail to achieve market acceptance, our business could be adversely affected. The consideration paid in connection with an acquisition may also affect our share price or future financial results depending on the structure of such consideration. To the extent we issue stock or other rights to purchase stock, including options or other rights, existing shareholders may be diluted and earnings per share may decrease. In addition, acquisitions may result in the incurrence of additional debt.
The price of our outstanding securities may be volatile. It is possible that in some future quarter (or quarters) our revenues, operating results or other measures of financial performance will not meet the expectations of public stock market analysts or investors, which could cause the price of our outstanding securities to decline or be volatile. Historically, our quarterly and annual sales and operating results have fluctuated. We expect fluctuations to continue in the future. In addition to general economic and political conditions, the following factors may affect our sales and operating results: the timing of significant customer orders, the timing of planned maintenance projects at customer facilities, changes in competitive pricing, wide variations in profitability by product line, variations in operating expenses, rapid increases in raw material and labor costs, the timing of announcements or introductions of new products or services by us, our competitors or our respective customers, the acceptance of those services, our ability to adequately meet staffing requirements with qualified personnel, relative

10

Table of Contents

variations in manufacturing efficiencies and costs, and the relative strength or weakness of international markets. Since our quarterly and annual revenues and operating results vary, we believe that period-to-period comparisons are not necessarily meaningful and should not be relied upon as indicators of our future performance.
Our business may be adversely impacted by work stoppages, staffing shortages and other labor matters. At December 31, 2016, we had approximately 7,400 employees, approximately 950 of whom were located in Canada and Europe where employees predominantly are represented by unions. Although we believe that our relations with our employees are good and we have had no strikes or work stoppages, no assurances can be made that we will not experience these and other types of conflicts with labor unions, works councils, other groups representing employees, or our employees in general, or that any future negotiations with our labor unions will not result in significant increases in the cost of labor.
Climate change legislation or regulations restricting emissions of “greenhouse gases” could result in reduced demand for our services and products. Scientific studies have suggested that emissions of certain gases, commonly referred to as “greenhouse gases” may be contributing to warming of the earth’s atmosphere. As a result, there have been a variety of regulatory developments, proposals or requirements and legislative initiatives that have been introduced in the United States (and other parts of the world) that are focused on restricting the emission of carbon dioxide, methane and other greenhouse gases. The adoption and implementation of any regulations which impose limiting emissions of carbon dioxide and other greenhouse gases from customers for whom we provide repair and maintenance services could affect demand for our products and services.
Interruptions in the proper functioning of our information systems could disrupt operations and cause increases in costs and/or decreases in revenues. The proper functioning of our information systems is critical to the successful operation of our business. Although our information systems are protected through physical and software safeguards, our information systems are still vulnerable to natural disasters, power losses, telecommunication failures and other problems. If critical information systems fail or are otherwise unavailable, our business operations could be adversely affected.
Regulations related to conflict-free minerals may cause us to incur additional expenses. The SEC has established annual disclosure and reporting requirements for those companies who use “conflict” minerals sourced from the Democratic Republic of Congo and adjoining countries in their products. These requirements could limit the pool of suppliers who can provide conflict-free minerals and as a result, we cannot ensure that we will be able to obtain these minerals at competitive prices. Compliance with these new requirements may also increase our costs. In addition, we may face challenges with our customers if we are unable to sufficiently verify the origins of the minerals used in our products.
Other risk factors. Other risk factors may include interruption of our operations, or the operations of our customers due to fire, hurricanes, earthquakes, power loss, telecommunications failure, terrorist attacks, labor disruptions, health epidemics and other events beyond our control.
Any one of these factors, or a combination of these factors, could materially affect our future results of operations, financial position or cash flows and whether any forward-looking statements in this Annual Report on Form 10-K ultimately prove to be accurate.
ITEM 1B.
UNRESOLVED STAFF COMMENTS
NONE

ITEM 2.
PROPERTIES
There are several materially important physical properties used in our operations. Our 120,000 square foot facility in Alvin, Texas consists of our primary training facility, equipment center and ISO-9001 certified manufacturing facility for clamps, enclosures, and sealants. Additionally, we own a 39,000 square foot manufacturing facility in Houston, Texas. We lease approximately 60,000 square feet of office space utilized as our corporate headquarters in Sugar Land, Texas. The following is a list of owned and leased branch service locations considered materially important physical properties:
Beaumont, Texas
Pasadena, Texas (2 locations)
Pearland, Texas
Hammond, Indiana
Cincinnati, Ohio

11

Table of Contents

Gonzales, Louisiana
Wood River, Illinois
Long Beach, California
Columbus, Ohio
Vlissingen, Netherlands
Kendal, Cumbria, United Kingdom
We believe that our property and equipment are adequate for our current needs, although additional investments are expected to be made for expansion of property and equipment, replacement of assets at the end of their useful lives will occur in connection with corporate development activities.
ITEM 3.
LEGAL PROCEEDINGS

Con Ed Matter—We have, from time to time, provided temporary leak repair services for the steam operations of Consolidated Edison Company of New York (“Con Ed”) located in New York City. In July 2007, a Con Ed steam main located in midtown Manhattan ruptured causing one death and other injuries and property damage. As of December 31, 2016, ninety-two lawsuits are currently pending against Con Ed, the City of New York and Team in the Supreme Courts of New York located in Kings, New York and Bronx County, alleging that our temporary leak repair services may have contributed to the cause of the rupture. The lawsuits seek generally unspecified compensatory damages for personal injury, property damage and business interruption. Additionally, on March 31, 2008, we received a letter from Con Ed alleging that our contract with Con Ed requires us to indemnify and defend Con Ed for additional claims filed against Con Ed as a result of the rupture. Con Ed filed an action to join Team and the City of New York as defendants in all lawsuits filed against Con Ed that did not include Team and the City of New York as direct defendants. We are vigorously defending the lawsuits and Con Ed’s claim for indemnification. We filed a motion to dismiss in December 2016. Based upon the current briefing schedule, a ruling on the motion is anticipated in the fall of 2017. We are unable to estimate the amount of liability to us, if any, associated with these lawsuits and the claim for indemnification. We maintain insurance coverage, subject to a deductible limit of $250,000, which we believe should cover these claims. We have not accrued any liability in excess of the deductible limit for the lawsuits. We do not believe the ultimate outcome of these matters will have a material adverse effect on our financial position, results of operations, or cash flows. We anticipate a trial on the merits during the first half of 2018.
Patent Infringement Matters—In December 2014, our subsidiary, Quest Integrity, filed three patent infringement lawsuits against three different defendants, two in the U.S. District of Delaware (the “Delaware Cases”) and one in the U.S. District of Western Washington (“Washington Case”). Quest Integrity alleges that the three defendants infringed Quest Integrity’s patent, entitled “2D and 3D Display System and Method for Furnace Tube Inspection”. This Quest Integrity patent generally teaches a system and method for displaying inspection data collected during the inspection of furnace tubes in petroleum and petro-chemical refineries. The subject patent litigation is specific to the visual display of the collected data and does not relate to Quest Integrity’s underlying advanced inspection technology. In these lawsuits Quest Integrity is seeking temporary and permanent injunctive relief, as well as monetary damages. Defendants have denied they infringe any valid claim of Quest Integrity’s patent, and have asserted declaratory judgment counterclaims that the patent at issue is invalid and/or unenforceable, and not infringed. In June 2015, the U.S. District of Delaware denied our motions for preliminary injunctive relief in the Delaware Cases (that is, our request that the defendants stop using our patented systems and methods during the pendency of the actions). The Delaware Cases are expected to proceed to trial in the second quarter of 2017. The Washington Case does not have a trial date scheduled.
We are involved in various other lawsuits and are subject to various claims and proceedings encountered in the normal conduct of business. In our opinion, any uninsured losses that might arise from these lawsuits and proceedings will not have a materially adverse effect on our consolidated financial statements.

ITEM 4.
MINE SAFETY DISCLOSURES
NOT APPLICABLE

12

Table of Contents

PART II
ITEM 5.
MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES
Market Information
Our stock is traded on the NYSE under the symbol “TISI”. The table below reflects the high and low sales prices of our common stock by quarter for the year ended December 31, 2016, the seven-month transition period from June 1, 2015 to December 31, 2015 and the year ended May 31, 2015.
 
Sales Price
 
High
 
Low
2016
 
 
 
Quarter ended:
 
 
 
March 31, 2016
$
31.86

 
$
21.75

June 30, 2016
$
32.49

 
$
23.53

September 30, 2016
$
33.71

 
$
24.10

December 31, 2016
$
39.60

 
$
28.00

2015
 
 
 
Transition period:
 
 
 
June 1, 2015 - December 31, 2015
$
47.55

 
$
30.81

Quarter ended:
 
 
 
August 31, 2014
$
43.53

 
$
36.09

November 30, 2014
$
44.36

 
$
35.18

February 28, 2015
$
41.42

 
$
35.44

May 31, 2015
$
41.22

 
$
35.60

Holders
There were 579 holders of record of our common stock as of March 10, 2017, excluding beneficial owners of stock held in street name.
Dividends
No cash dividends were declared or paid during the year ended December 31, 2016, the seven months ended December 31, 2015 or the year ended May 31, 2015. We are limited in our ability to pay cash dividends without the consent of our bank syndicate. Accordingly, we have no present intention to pay cash dividends in the foreseeable future. Additionally, any future dividend payments will continue to depend on our financial condition, market conditions and other matters deemed relevant by the Board.
Securities Authorized for Issuance Under Equity Compensation Plans
This information has been omitted from this Annual Report on Form 10-K as we intend to file such information in our Definitive Proxy Statement no later than 120 days following the close of our fiscal year ended December 31, 2016. The information required regarding equity compensation plans is hereby incorporated by reference.

13

Table of Contents

Performance Graph
The following performance graph compares the performance of our common stock to the NYSE Composite Index and a Peer Group Index. The comparison assumes $100 was invested on May 31, 2011 in our common stock, the NYSE Composite Index and a Peer Group Index. The values of each investment are based on share price appreciation, with reinvestment of all dividends, assuming any were paid. For each graph, the investments are assumed to have occurred at the beginning of each period presented. The following companies are included in our Peer Group Index used in the graph: Matrix Service Company, Englobal Corporation and Mistras Group, Inc.

a2016q410k_chart-25343.jpg
*
$100 invested on 5/31/11 in stock or index, including reinvestment of dividends. Years ended May 31, 2012, 2013, 2014 and 2015; seven-month transition period ended December 31, 2015; and year ended December 31, 2016.
 
5/11
 
5/12
 
5/13
 
5/14
 
5/15
 
12/15
 
12/16
Team, Inc.
100.00

 
116.00

 
156.83

 
182.26

 
173.04

 
138.96

 
170.65

NYSE Composite
100.00

 
90.38

 
116.26

 
136.99

 
144.14

 
134.13

 
150.14

Peer Group
100.00

 
100.50

 
110.43

 
166.73

 
105.39

 
115.66

 
145.13

Notes: The above information was provided by Research Data Group, Inc.
ITEM 6.
SELECTED FINANCIAL DATA
We have included selected financial data for the year ended December 31, 2016, the seven months ended December 31, 2015 and for the years ended May 31, 2012 through 2015 under “Five Year Comparison,” in the financial information that is included in this report in Part II, Item 8, “Financial Statements and Supplementary Data.” This information is incorporated herein by reference.

14

Table of Contents

ITEM 7.
MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
The Management’s Discussion and Analysis of Financial Condition and Results of Operations listed in the Financial Table of Contents included in this report is incorporated herein by reference.
ITEM 7A.
QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
We have included a discussion about market risks under “Market Risk” in the Management’s Analysis that is included in this report in Part II, Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations.” This information is incorporated herein by reference.
ITEM 8.
CONSOLIDATED FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
Our Consolidated Financial Statements, the Notes to Consolidated Financial Statements, the reports of our Independent Registered Public Accounting Firm and the information under “Quarterly Results” listed in this report are incorporated herein by reference. All other schedules for which provision is made in the applicable accounting regulation of the SEC are not required under the related instructions or are inapplicable, and therefore, have been omitted.
ITEM 9.
CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE
There have been no disagreements concerning accounting and financial disclosures with our independent accountants during any of the periods presented.
ITEM 9A.
CONTROLS AND PROCEDURES
Limitations on effectiveness of control. Our management, including the principal executive and financial officer, does not expect that our disclosure controls and procedures or our internal control over financial reporting will prevent or detect all errors and all fraud. A control system, no matter how well designed or operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. The design of our control system reflects the fact that there are resource constraints and the benefits of such controls must be considered relative to their costs. Further, because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control failures and instances of fraud, if any, have been detected. These inherent limitations include the realities that judgments in decision-making can be faulty and that breakdowns can occur because of simple error or mistake. Additionally, controls can be circumvented by the individual acts, by collusion of two or more people, or by management override of the controls. The design of any system of controls is also based in part on certain assumptions about the likelihood of future events and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions. Projections of management’s assessments of the current effectiveness of our disclosure controls and procedures and its internal control over financial reporting are subject to risks. However, our disclosure controls and procedures are designed to provide reasonable assurance that the objectives of our control system are met.
Evaluation of disclosure controls and procedures. As of the end of the period covered by this report, an evaluation was carried out under the supervision and with the participation of our management, including our Chief Executive Officer (“CEO”) and our Chief Financial Officer (“CFO”), of the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (“Exchange Act”)). This evaluation included consideration of the various processes carried out under the direction of our disclosure committee in an effort to ensure that information required to be disclosed in our SEC reports is recorded, processed, summarized and reported within the time periods specified by the SEC. This evaluation also considered the work completed related to our compliance with Section 404 of the Sarbanes-Oxley Act of 2002.
Based on this evaluation, our CEO and CFO concluded that, as of December 31, 2016, our disclosure controls and procedures were operating effectively to ensure that the information required to be disclosed in our SEC reports is recorded, processed, summarized and reported within the requisite time periods and that such information is appropriately accumulated and communicated to management, including our CEO and CFO, as appropriate, to allow timely decisions regarding required disclosure.

15

Table of Contents

Management’s Annual Report on Internal Control Over Financial Reporting
Our management is responsible for establishing and maintaining adequate internal control over financial reporting as defined in Exchange Act Rule 13a-15(f). Our internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of our consolidated financial statements for external purposes in accordance with GAAP.
Internal control over financial reporting cannot provide absolute assurance of achieving financial objectives because of its inherent limitations. Internal control over financial reporting is a process that involves human diligence and compliance and is subject to lapses in judgment and breakdowns resulting from human failures. Internal control over financial reporting can also be circumvented by collusion or improper management override. Because of such limitations, there is a risk that material misstatements may not be prevented or detected on a timely basis by internal control over financial reporting. However, these inherent limitations are known features of the financial reporting process. Therefore, it is possible to design into the process safeguards to reduce, though not eliminate, this risk.
We have used the framework set forth in the report entitled Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013) to evaluate the effectiveness of our internal control over financial reporting. We have concluded that our internal control over financial reporting was effective as of December 31, 2016.
Management’s annual assessment of the effectiveness of our internal control over financial reporting as of December 31, 2016 excluded the internal control over financial reporting of Furmanite, representing total assets of approximately $215 million and total revenues of approximately $216 million included in the financial statements of Team, Inc. and subsidiaries as of and for the year ended December 31, 2016.
Attestation report of the registered public accounting firm. The attestation report of KPMG LLP, the Company’s independent registered public accounting firm, on the Company’s internal control over financial reporting is set forth in this Annual Report on Form 10-K on page 35.
Changes in internal control over financial reporting. There were no changes in our internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) of the Securities Exchange Act) that have materially affected or are reasonably likely to materially affect our internal control over financial reporting during the fourth quarter of our fiscal year ended December 31, 2016.

ITEM 9B.
OTHER INFORMATION
NONE

16

Table of Contents

PART III
The information for the following items of Part III has been omitted from this Annual Report on Form 10-K since we will file, not later than 120 days following the close of our fiscal year ended December 31, 2016, our Definitive Proxy Statement. The information required by Part III will be included in that proxy statement and such information is hereby incorporated by reference, with the exception of the information under the headings “Compensation Committee Report” and “Audit Committee Report.”
ITEM 10.
DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE
ITEM 11.
EXECUTIVE COMPENSATION
ITEM 12.
SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS
ITEM 13.
CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE
ITEM 14.
PRINCIPAL ACCOUNTING FEES AND SERVICES


17

Table of Contents

PART IV
ITEM 15.
EXHIBITS AND FINANCIAL STATEMENT SCHEDULES
(a)
1)
Consolidated Financial Statements filed as part of this report are listed in the Financial Table of Contents included in this report and incorporated by reference in this report in Part II, Item 7 “ Management’s Discussion and Analysis of Financial Condition and Results of Operations” and Item 8, “Consolidated Financial Statements and Supplementary Data.”
 
2)
All schedules for which provision is made in the applicable accounting regulations of the SEC are listed in this report in Part II, Item 8, “Consolidated Financial Statements and Supplementary Data.”
 
3)
Reference is made to the Exhibit Index beginning on page 20 hereof.
(b)
 
Exhibits
 
 
Reference is made to the Exhibit Index beginning on page 20 hereof.


ITEM 16.
FORM 10-K SUMMARY
NONE


18

Table of Contents

SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized March 15, 2017.
 
TEAM, INC.
 
/S/    TED W. OWEN        
Ted W. Owen
President and Chief Executive Officer
(Principal Executive Officer)
Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacity and on the dates indicated.
 
/S/    TED W. OWEN
  
President and Chief Executive Officer and Director (Principal Executive Officer)
March 15, 2017
(Ted W. Owen)
 
 
 
 
 
 
 
/S/    GREG L. BOANE        
  
Executive Vice President, Chief Financial Officer and Treasurer (Principal Financial Officer and Principal Accounting Officer)
March 15, 2017
(Greg L. Boane)
 
 
 
 
 
 
 
/S/ JEFFERY G. DAVIS
  
Director
March 15, 2017
(Jeffery G. Davis)
 
 
 
 
 
 
 
/S/    VINCENT D. FOSTER
  
Director
March 15, 2017
(Vincent D. Foster)
 
 
 
 
 
 
 
/S/    PHILIP J. HAWK
  
Chairman of the Board
March 15, 2017
(Philip J. Hawk)
 
 
 
 
 
 
 
/S/    SYLVIA J. KERRIGAN
  
Director
March 15, 2017
(Sylvia J. Kerrigan)
 
 
 
 
 
 
 
/S/    EMMETT J. LESCROART
  
Director
March 15, 2017
(Emmett J. Lescroart)
 
 
 
 
 
 
 
/S/    MICHAEL A. LUCAS     
  
Director
March 15, 2017
(Michael A. Lucas)
 
 
 
 
 
 
 
/S/    LOUIS A. WATERS  
  
Director
March 15, 2017
(Louis A. Waters)
 
 
 
 
 
 
 
/s/ GARY G. YESAVAGE
 
Director
March 15, 2017
(Gary G. Yesavage)
 
 
 
 
 
 
 


19

Table of Contents

EXHIBIT INDEX

Exhibit
Number
 
Description
 
 
 
3.1
 
Amended and Restated Articles of Incorporation of the Company (filed as Exhibit 3.1 to the Company’s Current Report on Form 8-K filed on December 2, 2011, incorporated by reference herein).
 
 
 
3.2
 
Certificate of Amendment of Amended and Restated Certificate of Incorporation of the Company, dated October 24, 2013 (filed as Exhibit 3.1 to the Company’s Current Report on Form 8-K filed on October 25, 2013, incorporated by reference herein).
 
 
 
3.3
 
Amended and Restated Bylaws of the Company (filed as Exhibit 3.1 to the Company’s Quarterly Report on Form 10-Q filed on April 4, 2014, incorporated by reference herein).
 
 
 
4.1
 
Certificate representing shares of common stock of Company (filed as Exhibit 4(1) to the Company’s Registration Statement on Form S-1, File No. 2-68928, incorporated by reference herein).
 
 
 
10.1†
 
Team, Inc. 2004 Restricted Stock Option and Award Plan dated June 24, 2004 (filed as Exhibit 10.21 to the Company’s Annual Report on Form 10-K for the year ended May 31, 2004, incorporated by reference herein).
 
 
 
10.2†
 
Team, Inc. 2006 Stock Incentive Plan (as Amended and Restated August 1, 2009) (filed as Exhibit 10.1 to the Company’s Current Report on Form 8-K filed on September 30, 2009, incorporated by reference herein).
 
 
 
10.3†
 
Form of Stock Unit Agreement (filed as Exhibit 10.2 to the Company’s Current Report on Form 8-K filed on October 17, 2008, incorporated by reference herein).
 
 
 
10.4†
 
Form of Performance-Based Stock Unit Agreement (filed as Exhibit 10.3 to the Company’s Current Report on Form 8-K filed on October 17, 2008, incorporated by reference herein).
 
 
 
10.5†
 
Form of Performance Share Award Agreement (filed as Exhibit 10.1 to the Company’s Current Report on Form 8-K filed November 4, 2014, incorporated by reference herein).
 
 
 
10.6
 
Third Amended and Restated Credit Agreement dated as of July 7, 2015 among Team, Inc., Bank of America, N.A. as Administrative Agent, Swingline Lender and L/C Issuer, JPMorgan Chase Bank, N.A., as Syndication Agent, Compass Bank, as Documentation Agent and the other Lenders party thereto (filed as Exhibit 10.1 to the Company’s Current Report on Form 8-K filed on July 9, 2015, incorporated by reference herein).
 
 
 
10.7†
 
Furmanite Corporation 1994 Stock Incentive Plan, Amendment and Restatement effective May 9, 2013 (filed as Exhibit 4.4 to the Company’s Registration Statement on Form S-8, File No. 333-209871, filed on March 1, 2016, incorporated by reference herein).
 
 
 
10.8
 
Second Amendment and Commitment Increase to Credit Agreement, dated February 24, 2016, among Team Inc., certain Team Inc. Subsidiary Guarantors, Bank of America, N.A., as Administrative Agent, Swing Line Lender and L/C Issuer, and other Lenders party thereto (filed as Exhibit 10.1 to the Company’s Current Report on Form 8-K filed on March 1, 2016, incorporated by reference herein).
 
 
 
10.9†
 
Team, Inc. 2016 Equity Incentive Plan (incorporated by reference to Annex A of the Company’s Definitive Proxy on Schedule 14A, as filed with the SEC on April 12, 2016, incorporated by reference herein).
 
 
 
10.10†
 
Non-Disclosure, Non-Competition and Non-Solicitation Agreement between Philip J. Hawk, Team Industrial Services, Inc., Team, Inc. and their affiliated entities, effective as of August 8, 2016 (filed as Exhibit 10.1 to the Company’s Quarterly Report on Form 10-Q filed on August 9, 2016, incorporated herein by reference).
 
 
 
10.11
 
Third Amendment to Credit Agreement, dated August 17, 2016, among Team, Inc., certain Team, Inc. Subsidiary Guarantors, Bank of America, N.A., as Administrative Agent, Swing Line Lender and L/C Issuer, and other Lenders party thereto (filed as Exhibit 10.1 to the Company’s Current Report on Form 8-K filed on August 23, 2016, incorporated by reference herein).
 
 
 
10.12
 
Fourth Amendment and Limited Waiver to Credit Agreement, dated December 19, 2016, among Team, Inc., certain Team, Inc. Subsidiary Guarantors, Bank of America, N.A., as Administrative Agent, Swing Line Lender and L/C Issuer, and other Lenders party thereto.
 
 
 
10.13
 
ATM Equity OfferingSM Sales Agreement, dated as of November 28, 2016, by and among Team, Inc., Merrill Lynch, Pierce, Fenner & Smith Incorporated, Raymond James & Associates, Inc. and SunTrust Robinson Humphrey, Inc. (filed as Exhibit 1.1 to the Company’s Current Report on Form 8-K filed on November 28, 2016, incorporated by reference herein).
 
 
 
10.14†
 
Form of Performance Award Agreement.

20

Table of Contents

Exhibit
Number
 
Description
 
 
 
21
 
Subsidiaries of the Company.
 
 
 
23.1
 
Consent of Independent Registered Public Accounting Firm—KPMG LLP.
 
 
 
31.1
 
Certifications pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
 
 
 
31.2
 
Certifications pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
 
 
 
32.1
 
Certifications pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
 
 
 
32.2
 
Certifications pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
 
 
 
101.INS
 
XBRL Instance Document.
 
 
 
101.SCH
 
XBRL Taxonomy Schema Document.
 
 
 
101.CAL
 
XBRL Calculation Linkbase Document.
 
 
 
101.DEF
 
XBRL Definition Linkbase Document.
 
 
 
101.LAB
 
XBRL Label Linkbase Document.
 
 
 
101.PRE
 
XBRL Presentation Linkbase Document.
Management contract or compensation plan or arrangement.

Note: Unless otherwise indicated, documents incorporated by reference are located under SEC file number 001-08604.


21

Table of Contents

FINANCIAL TABLE OF CONTENTS


22

Table of Contents

MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
The following review of our results of operations and financial condition should be read in conjunction with Item 1 “Business,” Item 1A “Risk Factors,” Item 2 “Properties,” and Item 8 “Consolidated Financial Statements and Supplementary Data,” included in this Annual Report on Form 10-K.
CAUTIONARY STATEMENT FOR THE PURPOSE OF
SAFE HARBOR PROVISIONS OF THE
PRIVATE SECURITIES LITIGATION REFORM ACT OF 1995
This report includes forward-looking statements within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934. In addition, other written or oral statements that constitute forward-looking statements may be made by us or on behalf of the Company in other materials we release to the public including all statements, other than statements of historical facts, included or incorporated by reference in this Annual Report on Form 10-K, that address activities, events or developments which we expect or anticipate will or may occur in the future. You can generally identify our forward-looking statements by the words “anticipate,” “believe,” “expect,” “plan,” “intend,” “estimate,” “project,” “projection,” “predict,” “budget,” “forecast,” “goal,” “guidance,” “target,” “will,” “could,” “should,” “may” and similar expressions.
We based our forward-looking statements on our reasonable beliefs and assumptions, and our current expectations, estimates and projections about ourselves and our industry. We caution that these statements are not guarantees of future performance and involve risks, uncertainties and assumptions that we cannot predict. In addition, we based many of these forward-looking statements on assumptions about future events that may prove to be inaccurate. We wish to ensure that such statements are accompanied by meaningful cautionary statements, so as to obtain the protections of the safe harbor established in the Private Securities Litigation Reform Act of 1995. New risk factors emerge from time to time and it is not possible for us to predict all such risk factors, nor can we assess the impact of all such risk factors on our business or the extent to which any factor, or combination of factors, may cause actual results to differ materially from those contained in any forward-looking statements. Accordingly, forward-looking statements cannot be relied upon as a guarantee of future results and involve a number of risks and uncertainties that could cause actual results to differ materially from those projected in the statements, including, but not limited to the statements under “Risk Factors.” We undertake no obligation to update publicly any forward-looking statements, whether as a result of new information, future events or otherwise.
This Management’s Discussion and Analysis of Financial Condition and Results of Operations is provided as a supplement to the accompanying consolidated financial statements and notes to help provide an understanding of our financial condition, changes in financial condition, and results of operations.
General Information
We are a leading provider of standard to specialty industrial services, including inspection, engineering assessment and mechanical repair and remediation required in maintaining high temperature and high pressure piping systems and vessels that are utilized extensively in the refining, petrochemical, power, pipeline and other heavy industries. We conduct operations in three segments: TeamQualspec, TeamFurmanite and Quest Integrity. Through the capabilities and resources in these three segments, we believe that Team is uniquely qualified to provide integrated solutions involving in their most basic form, inspection to assess condition, engineering assessment to determine fitness for purpose in the context of industry standards and regulatory codes and mechanical services to repair, rerate or replace based upon the client’s election. In addition, our Company is capable of escalating with the client’s needs—as dictated by the severity of the damage found and the related operating conditions—from standard services to some of the most advanced services and expertise available in the industry.
TeamQualspec provides standard and advanced NDT services for the process, pipeline and power sectors, pipeline integrity management services, field heat treating services, as well as associated engineering and assessment services. These services can be offered while facilities are running (on-stream), during facility turnarounds or during new construction or expansion activities.
TeamFurmanite, our mechanical services segment, provides turnaround and on-stream services. Turnaround services are project-related and demand is a function of the number and scope of scheduled and unscheduled facility turnarounds as well as new industrial facility construction or expansion activities. The turnaround services TeamFurmanite provides include field machining, technical bolting, field valve repair, heat exchanger repair, and isolation test plugging services. On-stream services

23

Table of Contents

offered by TeamFurmanite represent the services offered while plants are operating and under pressure. These services include leak repair, fugitive emissions control and hot tapping.
Quest Integrity provides integrity and reliability management solutions for the process, pipeline and power sectors. These solutions encompass two broadly-defined disciplines: (1) highly specialized in-line inspection services for unpiggable process piping and pipelines using proprietary in-line inspection tools and analytical software; and (2) advanced condition assessment services through a multi-disciplined engineering team.
We offer these services globally through over 220 locations in 20 countries throughout the world with more than 7,400 employees. We market our services to companies in a diverse array of heavy industries which include the petrochemical, refining, power, pipeline, steel, pulp and paper industries, as well as municipalities, shipbuilding, OEMs, distributors, and some of the world’s largest engineering and construction firms.
Results of Operations
In November 2015, we announced we would change our fiscal year end to December 31 of each calendar year from May 31. In connection with this change, we previously filed a Transition Report on Form 10-K to report the results of the seven-month transition period from June 1, 2015 to December 31, 2015. In this report, the periods presented are the year ended December 31, 2016, the seven-month transition period from June 1, 2015 to December 31, 2015 and the years ended May 31, 2015 and 2014. For comparison purposes, we have also included unaudited data for the year ended December 31, 2015 and for the seven months ended December 31, 2014.
Year Ended December 31, 2016 Compared to Year Ended December 31, 2015
The following table sets forth the components of revenue and operating income (loss) from our operations for years ended December 31, 2016 and 2015 (in thousands):
 
 
Year Ended
December 31,
 
Increase
(Decrease)
 
2016
 
2015
 
$
 
%
 
 
 
(unaudited)
 
 
 
 
Revenues by business segment:
 
 
 
 
 
 
 
TeamQualspec
$
589,478

 
$
549,307

 
$
40,171

 
7.3
 %
TeamFurmanite
539,627

 
302,581

 
237,046

 
78.3
 %
Quest Integrity
67,591

 
74,468

 
(6,877
)
 
(9.2
)%
Total
$
1,196,696

 
$
926,356

 
$
270,340

 
29.2
 %
 
 
 
 
 
 
 
 
Operating income (loss):
 
 
 
 
 
 
 
TeamQualspec
$
43,367

 
$
56,001

 
$
(12,634
)
 
(22.6
)%
TeamFurmanite
27,283

 
26,164

 
1,119

 
4.3
 %
Quest Integrity
4,780

 
11,497

 
(6,717
)
 
(58.4
)%
Corporate and shared support services
(78,548
)
 
(46,371
)
 
(32,177
)
 
69.4
 %
Total
$
(3,118
)
 
$
47,291

 
$
(50,409
)
 
(106.6
)%
Revenues. Total revenues grew $270.3 million or 29.2% from the same period in the prior year, primarily due to the Furmanite and Qualspec acquisitions, completed in February 2016 and July 2015, respectively, partially offset by lower Quest Integrity revenues and an adverse impact of $6.6 million due to changes in foreign exchange rates. Due to the integration of both Furmanite and Qualspec into our existing operations during 2016, it is not practicable to specifically quantify the year-over-year revenue impact of these acquisitions. On a pro forma basis, assuming that the Furmanite and Qualspec acquisitions has occurred at the beginning of 2015, total revenues declined $120.8 million, or 8.9%. Market softness, which began in the second half of 2015, continued throughout 2016 across all three business segments. The weak market conditions led to a combination of project deferrals, scope reductions and maintenance deferrals, which, among other impacts, resulted in approximately 29% lower sales volumes in heat treating services, typically associated with large, more complex turnaround projects, within our TeamQualspec segment. Additionally, our TeamFurmanite and TeamQualspec segments were adversely affected by wildfires in the Canadian oil sands area near Fort McMurray in the second quarter of 2016 as well as severe

24

Table of Contents

flooding in Louisiana in the third quarter of 2016. In the fall of 2016, what appeared to be the first signs of more normalized market activity did not ultimately develop into sustained increases as we saw demand weaken again in the latter part of the year. In spite of the soft demand in 2016, we continue to be optimistic that end markets could begin to improve during 2017.
Operating income (loss). Overall operating loss was $3.1 million, compared to operating income of $47.3 million in the prior year. The current year includes non-routine expenses totaling $34.6 million consisting of $14.5 million in professional fees and other costs associated with mergers and acquisitions activity and change in fiscal year end, $7.6 million in costs related to the implementation of our new ERP system, $5.5 million in exit costs and other related charges primarily associated with severance costs related to the closure of certain acquired Furmanite locations in Western Europe, $3.0 million in legal fees associated with a legal defense of Quest Integrity intellectual property and $4.0 million in other non-routine items. The non-routine items were attributed to our operating segments as follows: $0.9 million in TeamQualspec, $8.9 million in TeamFurmanite, $3.1 million in Quest Integrity and $21.7 million in corporate and shared support services. Approximately $5.2 million of the merger and acquisition-related costs were attributable to Furmanite obligations, primarily for change of control and severance payments. The prior year included $14.2 million of non-routine expenses resulting from $7.7 million in professional fees and other costs associated with mergers and acquisitions activity and a change in fiscal year end, $2.7 million in legal fees associated with a legal defense of Quest Integrity intellectual property, $2.9 million in costs related to the implementation of our new ERP system and $0.9 million of other non-routine items. The non-routine items were attributed to our operating segments as follows: $0.5 million in TeamQualspec, $0.4 million in TeamFurmanite, $2.7 million in Quest Integrity and $10.6 million in corporate and shared support services. Excluding the impact of these non-routine items, operating income (loss) changed unfavorably by $30.0 million as the effect of acquisition-related growth was more than offset by the adverse effects of the current market softness and reduced customer spending described above. Additionally, we experienced lower average gross margins in the current year as the market softness resulted in an unfavorable service mix shift away from higher margin advanced and specialty services normally tied to large turnaround projects. Further, operating income (loss) was affected by an increase in corporate and shared support services of $21.1 million, which includes the addition of Furmanite’s ongoing corporate-related costs and higher share-based compensation expense.
Interest expense. Interest expense increased from $5.8 million in the prior year to $12.7 million in the current year. The increase is due primarily to additional debt financing used to fund acquisitions, including the July 2015 acquisition of Qualspec and a portion of the February 2016 acquisition of Furmanite.
Venezuelan Impairment Loss. During the year ended December 31, 2015, we began reporting the results of our Venezuelan operations using the cost method of accounting. This change resulted in a one-time pre-tax charge of $1.2 million, which is included in other expense (income), net. This decision was made given the other-than-temporary lack of exchangeability in the Venezuelan currency combined with other recent Venezuelan regulations that negatively impacted our ability to control operations and maintain normal service levels. We disposed of our Venezuelan operations in June 2015.
Foreign currency gain (loss). Foreign currency gains were $0.1 million for the year ended December 31, 2016 compared to foreign currency losses of $1.1 million in the same period last year. Foreign currency gains and losses in both periods reflect the effects of fluctuations in the U.S. Dollar relative to the currencies we have exposure to, including but not limited to, the Australian Dollar, Brazilian Real, British Pound, Canadian Dollar, Euro, Malaysian Ringgit and Mexican Peso.
Taxes. The benefit for income tax was $3.1 million on the pre-tax loss from continuing operations of $15.7 million in the current year compared to the provision for income tax of $13.7 million on pre-tax income from continuing operations of $39.2 million in the prior year. The effective tax rate was 19.8% for the year ended December 31, 2016 and 35.1% for the year ended December 31, 2015. The decrease in the effective tax rate was primarily driven by the effects of discrete items such as the settlement of prior years with the Internal Revenue Service and changes in valuation allowances as well as permanent differences that had significant impacts due to the size and direction of pre-tax income (loss) from continuing operations in both periods.
Discontinued operations. Loss from discontinued operations, net of income tax, was $0.1 million for the year ended December 31, 2016 and relates to the operating results and disposal of an acquired Furmanite business that we sold in December 2016.



25

Table of Contents

Seven Months Ended December 31, 2015 Compared to Seven Months Ended December 31, 2014
The following table sets forth the components of revenue and operating income from our operations for the seven months ended December 31, 2015 and 2014 (in thousands):
 
 
Seven Months Ended
December 31,
 
Increase
(Decrease)
 
2015
 
2014
 
$
 
%
 
 
 
(unaudited)
 
 
 
 
Revenues by business segment:
 
 
 
 
 
 
 
TeamQualspec
$
351,949

 
$
269,742

 
$
82,207

 
30.5
 %
TeamFurmanite
178,238

 
176,112

 
2,126

 
1.2
 %
Quest Integrity
41,531

 
41,554

 
(23
)
 
(0.1
)%
Total
$
571,718

 
$
487,408

 
$
84,310

 
17.3
 %
 
 
 
 
 
 
 
 
Operating income:
 
 
 
 
 
 
 
TeamQualspec
$
31,175

 
$
35,696

 
$
(4,521
)
 
(12.7
)%
TeamFurmanite
14,335

 
16,838

 
(2,503
)
 
(14.9
)%
Quest Integrity
5,491

 
7,194

 
(1,703
)
 
(23.7
)%
Corporate and shared support services
(31,839
)
 
(19,645
)
 
(12,194
)
 
62.1
 %
Total
$
19,162

 
$
40,083

 
$
(20,921
)
 
(52.2
)%
Revenues. Total revenues grew $84.3 million or 17.3% from the same period in 2014. Of this amount, approximately $85.8 million represents revenues from acquisitions completed during 2015. Excluding the impacts of acquisitions and an adverse impact of $16.3 million due to foreign exchange rates, total revenues increased by $14.8 million, TeamQualspec revenues increased by $11.6 million, TeamFurmanite revenues increased by $2.3 million and Quest revenues increased by $0.9 million. While activity levels were up slightly in the seven months ended December 31, 2015, the fall turnaround season was softer than expected as our refining and petrochemical customers deferred many of their planned capital and maintenance projects.
Operating income. Overall operating income declined by $20.9 million or 52.2% from the same period in 2014. The seven months ended December 31, 2015 includes non-routine expenses totaling $11.1 million related to $7.1 million in professional fees related to costs associated with mergers and acquisitions activity and a change in fiscal year end, $0.5 million in contingent consideration revaluation, $1.2 million in intellectual property defense legal costs and $2.3 million in costs related to the implementation of our ERP system (all included in Corporate and shared support services). The seven months ended December 31, 2014 included $0.2 million of professional fees related to mergers and acquisitions activity. Additionally, adverse foreign exchange rates reduced operating income by $1.1 million. Excluding the impact of these non-routine items, operating income decreased by $8.7 million or 21.7% as a result of weaker than expected revenue generation mentioned above coupled with an increase in corporate and shared support services of $2.8 million.
Interest expense. Interest expense increased from $1.3 million for the seven months ended December 31, 2014 to $4.9 million for the seven months ended December 31, 2015. The increase is due primarily to additional debt financing used to fund the July 2015 acquisition of Qualspec.
Foreign currency loss. Foreign currency losses decreased from $1.2 million in the seven months ended December 31, 2014 to $0.8 million in the seven months ended December 31, 2015. The seven-month period ended December 31, 2015 reflected the effects of a strengthening U.S. Dollar relative to the currencies we have exposure to, including but not limited to, the Euro, Australian Dollar, Brazilian Real, Canadian Dollar, Malaysian Ringgit and Mexican Peso.
Taxes. The provision for income tax was $4.6 million on pre-tax income of $13.5 million for the seven months ended December 31, 2015 compared to the provision for income tax of $13.6 million on pre-tax income of $37.6 million for the same period in 2014. The effective tax rate was 34% for the seven months ended December 31, 2015 and 36% for the seven months ended December 31, 2014. The reduction in the effective tax rate was primarily the result of foreign exchange rate changes to certain deferred tax liability accounts.

26

Table of Contents

Year Ended May 31, 2015 Compared to Year Ended May 31, 2014
The following table sets forth the components of revenue and operating income from our operations for years ended May 31, 2015 and 2014 (in thousands):
 
 
Year Ended
May 31,
 
Increase
(Decrease)
 
2015
 
2014
 
$
 
%
Revenues by business segment:
 
 
 
 
 
 
 
TeamQualspec
$
467,099

 
$
408,259

 
$
58,840

 
14.4
%
TeamFurmanite
300,456

 
275,322

 
25,134

 
9.1
%
Quest Integrity
74,492

 
65,946

 
8,546

 
13.0
%
Total
$
842,047

 
$
749,527

 
$
92,520

 
12.3
%
 
 
 
 
 
 
 
 
Operating income:
 
 
 
 
 
 
 
TeamQualspec
$
60,198

 
$
47,787

 
$
12,411

 
26.0
%
TeamFurmanite
28,713

 
26,177

 
2,536

 
9.7
%
Quest Integrity
13,196

 
9,260

 
3,936

 
42.5
%
Corporate and shared support services
(33,642
)
 
(29,803
)
 
(3,839
)
 
12.9
%
Total
$
68,465

 
$
53,421

 
$
15,044

 
28.2
%
Revenues. Total revenues increased 12.3% or $92.5 million in 2015 versus 2014, with TeamQualspec revenues growing $58.8 million, TeamFurmanite revenues growing $25.1 million and Quest Integrity revenues growing $8.5 million. The TeamQualspec business is comprised of both traditional and advanced NDE services, as well as Heat Treating services. The TeamQualspec NDE services were $364.3 million in 2015, up $44.3 million or 14% from 2014. Overall favorable market conditions across most of our regions, coupled with growth in tank inspection and rope access services, all contributed to the increase in TeamQualspec revenues. Advanced inspection services, such as Phased Array Ultrasonics also experienced increased demand in 2015. TeamQualspec Heat Treating services, which are fundamentally performed in turnarounds or projects, were $102.8 million, up $12.8 million or 14% from 2014 due to favorable market conditions, increased large project activity levels, and successful deployment of our mobile smart rigs and smart heat consoles. Unfavorable foreign currency exchange rate fluctuations in Canada negatively impacted TeamQualspec’s revenue by approximately $8.0 million when compared to 2014.
TeamFurmanite includes both on-stream and turnaround/project services. On-stream services were $158.7 million in 2015, consistent with 2014 results. Turnaround services within TeamFurmanite were $141.8 million, up $25.8 million or 22% from 2014. Overall market conditions were favorable as TeamFurmanite experienced revenue growth across most regions and service offerings. Turnaround project levels were strong during the year and favorably impacted by several large projects. Offsetting these market growth factors, TeamFurmanite was negatively impacted by unfavorable foreign currency exchange rate fluctuations during 2015 relating primarily to the Euro and Canadian dollar. We estimate an unfavorable foreign currency impact of approximately $6.0 million.
Quest Integrity revenues increased $8.5 million or 13% in 2015 from 2014 as Quest Integrity’s pipeline inspection business was up significantly in 2015. However, this was partially offset by a generally weak process inspection market, resulting from lower crude oil prices, which led to some turnaround project deferrals.
Operating Income. Total operating income was $68.5 million in 2015 compared to $53.4 million in 2014, an increase of $15.0 million or 28%. Changes in operating income within business groups were driven primarily by increased revenues from higher activity levels. Gross margins improved by one point and four points in 2015 for TeamQualspec and Quest Integrity, respectively, while gross margin for TeamFurmanite was unchanged in comparison to the prior year. Operating income in 2015 was negatively impacted by $3.2 million in non-routine costs consisting of acquisition-related fees, legal fees surrounding the defense of intellectual property associated with Quest Integrity, ERP system implementation costs, and a fixed asset write down. Non-routine items benefitted operating income in 2014 by $1.4 million consisting of a revaluation of contingent consideration, partially offset by severance costs.

27

Table of Contents

Earnings from Unconsolidated Affiliates. The earnings from unconsolidated affiliates in the 2014 results represented our interest in a joint venture providing inspection services in Alaska. The joint venture was dissolved in December 2013 and the operations that were formerly conducted in the joint venture are now conducted directly by the TeamQualspec business unit.
Venezuelan Impairment Loss. During the year ended May 31, 2015, Team began reporting the results of its Venezuelan operations using the cost method of accounting. This change resulted in a one-time pre-tax charge of $1.2 million. This decision was made given the other-than-temporary lack of exchangeability in the Venezuelan currency combined with other recent Venezuelan regulations that negatively impacted our ability to control operations and maintain normal service levels. We disposed of our Venezuelan operations in June 2015.
Foreign Currency Loss. Non-operating results include $1.5 million foreign currency transaction losses for the year ended May 31, 2015 compared to losses of $4.2 million for the year ended May 31, 2014. Currency transaction losses in the year ended May 31, 2015 were driven primarily by a weakening of the Euro, Canadian Dollar and Mexican Peso against the U.S. Dollar. Currency transaction losses in the year ended May 31, 2014 were primarily due to fluctuations between the Venezuelan Bolivar and the U.S. Dollar. We accounted for Venezuela as a highly-inflationary economy and accordingly, all currency fluctuations between the Bolivar and the U.S. Dollar were recorded in our statement of operations. Due to the devaluations of the Bolivar in 2014, we recorded a $4.0 million foreign currency loss during the year ended May 31, 2014.
Taxes. The provision for income tax was $22.8 million on pre-tax income of $63.3 million for the year ended May 31, 2015 compared to the provision for income tax of $16.2 million on pre-tax income of $46.4 million for the year ended May 31, 2014. The effective tax rate was 36% for the year ended May 31, 2015 and 35% for the year ended May 31, 2014. The increase in the effective tax rate was primarily due to changes in deferred tax liabilities related to the differences between the financial reporting basis and U.S. tax basis of investments in certain foreign subsidiaries.
Liquidity and Capital Resources
Financing for our operations consists primarily of vendor financing and leasing arrangements, our banking credit facility and cash flows attributable to our operations, which we believe are sufficient to fund our business needs.
In July 2015, we renewed our banking credit facility. In accordance with the second amendment to the Credit Facility, which was signed in February 2016, the Credit Facility has borrowing capacity of up to $600 million and consists of a $400 million, five-year revolving loan facility and a $200 million five-year term loan facility, the proceeds of which were used to fund, in part, the Company’s acquisition of Qualspec. The swing line facility is $35 million. The Credit Facility matures in July 2020, bears interest based on a variable Eurodollar rate option (LIBOR plus 2.25% margin at December 31, 2016) and has commitment fees on unused borrowing capacity (0.40% at December 31, 2016). The Credit Facility limits our ability to pay cash dividends without the consent of our bank syndicate. The Credit Facility also contains financial covenants, which were amended in August 2016 pursuant to the third amendment to the Credit Agreement. The covenants, as amended, require the Company to maintain as of the end of each fiscal quarter (i) a maximum ratio of consolidated funded debt to consolidated EBITDA (the “Total Leverage Ratio”, as defined in the Credit Facility agreement) of not more than 4.50 to 1.00 as of December 31, 2016, not more than 4.25 to 1.00 as of March 31, 2017 and June 30, 2017, not more than 3.75 to 1.00 as of September 30, 2017 and thereafter the maximum ratio decreases by 0.25 to 1.00 every quarter until it reaches 3.00 to 1.00, (ii) a maximum ratio of senior secured debt to consolidated EBITDA of not more than 3.00 to 1.00 and (iii) an interest coverage ratio of less than 3.00 to 1.00. As of December 31, 2016, we are in compliance with these covenants. With respect to the Total Leverage Ratio, our ratio stood at 4.19 to 1.00 as of December 31, 2016. At December 31, 2016, we had $46.2 million of cash on hand and approximately $29 million of available borrowing capacity through our Credit Facility. In connection with the renewal of our Credit Facility, we are amortizing $3.0 million of associated debt issuance costs over the life of the Credit Facility. While we are in compliance with our financial covenants as of December 31, 2016, management continues to execute various initiatives designed to reduce the Company’s obligations outstanding under the Credit Facility and improve operating cash flows. However, there can be no assurance that these actions will be successful or that we will be able to maintain compliance with the financial covenants as of any future date.
At the end of 2013, we initiated the design and implementation of a new ERP system, which is expected to be substantially installed by the end of 2017. Through December 31, 2016, we have capitalized $44.9 million associated with the project which includes $1.4 million of capitalized interest.
On October 1, 2013, our Board approved an initial $25 million stock repurchase plan, superseding and replacing our previous stock repurchase plan. During the second quarter ended November 30, 2013, we repurchased 369,900 shares for a total cost of $13.3 million. These shares, along with 89,569 shares purchased under a previous plan in a prior period at a cost of $1.3 million, were retired and are not included in common stock issued and outstanding as of May 31, 2014. The retirement of

28

Table of Contents

the shares purchased resulted in a reduction in common stock of $0.1 million, a reduction of $2.2 million to additional paid-in capital, and a $12.3 million reduction in retained earnings.
On June 23, 2014, our Board authorized an increase in the stock repurchase plan limit to repurchase Team common stock up to $50 million (net of the $13.3 million repurchased in the quarter ended November 30, 2013). During the quarter ended February 28, 2015, we repurchased 546,977 shares for a total cost of $21.1 million. During the year ended December 31, 2016, we repurchased 274,110 shares for a total cost of $7.6 million. In the fourth quarter of 2016, these 821,087 shares were retired and are not included in common stock issued and outstanding as of December 31, 2016. The retirement of the shares resulted in a reduction in common stock of $0.2 million, a reduction of $9.1 million to additional paid-in capital and a $19.4 million reduction to retained earnings. At December 31, 2016, $7.9 million remained available to repurchase shares under the stock repurchase plan.
    
On October 11, 2016, we filed a universal shelf registration statement on Form S-3 with the SEC (the “Shelf Registration Statement”). The Shelf Registration Statement allows us to issue common stock, preferred stock, debt securities, warrants and units from time to time in one or more offerings. Issuances of securities pursuant to the Shelf Registration Statement require the filing of a prospectus supplement with the SEC identifying the amount and terms of the securities to be issued.
On November 28, 2016, we filed a prospectus supplement to the Shelf Registration Statement under which we may sell up to $150.0 million of our common stock through an “at-the-market” equity offering program (the “ATM Program”). Through December 31, 2016, we sold 167,931 shares of common stock under the ATM Program. The net proceeds from such sales were $6.0 million after deducting the aggregate commissions paid of approximately $0.1 million and were used to reduce outstanding indebtedness. The Company intends to use the net proceeds from any future sales under the ATM Program primarily to reduce outstanding indebtedness, which may include amounts outstanding under the Company’s Credit Facility, and for general corporate purposes. The timing of any additional sales of common stock made pursuant to the ATM Program will depend on a variety of factors to be determined by the Company. In connection with the filing of the Shelf Registration Statement and the commencement of the ATM program, we capitalized costs totaling $0.7 million, which are being allocated as issuance costs as sales of securities occur.
Restrictions on cash. Included in our cash and cash equivalents at December 31, 2016 is $14.0 million of cash in certain foreign subsidiaries (located primarily in Europe and Canada) where earnings are considered by the Company to be permanently reinvested. In the event that some or all of this cash were to be repatriated, we would be required to accrue and pay additional taxes. While not legally restricted from repatriating this cash, we consider all undistributed earnings of these foreign subsidiaries to be indefinitely reinvested and access to cash to be limited. At December 31, 2015, we had $5.0 million in restricted cash on our balance sheet to reflect the amount held in escrow for contingent consideration as stipulated by the Qualspec purchase agreement. Based on Qualspec’s results through December 31, 2015, the contingent consideration did not become due and, accordingly, this cash became unrestricted in 2016.
Cash flows attributable to our operating activities. For the year ended December 31, 2016, net cash provided by operating activities was $79.6 million. Although we incurred a net loss of $12.7 million, the effect of depreciation and amortization of $48.7 million, a decrease in working capital of $31.2 million and non-cash compensation cost of $7.3 million resulted in positive operating cash flow.
For the seven months ended December 31, 2015, net cash provided by operating activities was $17.3 million. Positive operating cash flow was primarily attributable to net income of $8.9 million, depreciation and amortization of $19.4 million, and non-cash compensation cost of $3.5 million offset by a increase in working capital of $20.4 million.
For the year ended May 31, 2015, net cash provided by operating activities was $43.5 million. Positive operating cash flow was primarily attributable to net income of $40.5 million, depreciation and amortization of $22.8 million, and non-cash compensation cost of $4.8 million offset by a $27.7 million increase in working capital.
For the year ended May 31, 2014, net cash provided by operating activities was $52.9 million. Positive operating cash flow was primarily attributable to net income of $30.1 million, depreciation and amortization of $21.5 million, and non-cash compensation cost of $4.2 million offset by a $5.6 million increase in working capital.
Cash flows attributable to our investing activities. For the year ended December 31, 2016, net cash used in investing activities was $70.8 million, consisting primarily of $48.4 million for business acquisitions, $45.8 million of capital expenditures and $13.3 million in net proceeds from the sale of discontinued operations. Capital expenditures included $19.3 million in costs related to our ERP project. Capital expenditures can vary depending upon specific customer needs that may

29

Table of Contents

arise unexpectedly. Discontinued operations relates to a pipeline inspection business that we acquired as part of the acquisition of Furmanite. This operation was sold in December 2016.
For the seven months ended December 31, 2015, net cash used in investing activities was $287.8 million, consisting primarily of $262.1 million for business acquisitions and $25.8 million of capital expenditures. Capital expenditures included $11.1 million in costs related to our ERP project. Capital expenditures can vary depending upon specific customer needs that may arise unexpectedly.
For the year ended May 31, 2015, net cash used in investing activities was $31.8 million, consisting primarily of $28.8 million of capital expenditures and $3.1 million related to business acquisitions. Capital expenditures included $10.0 million in costs related to our ERP project.
For the year ended May 31, 2014, net cash used in investing activities was $40.6 million, consisting primarily of $33.0 million of capital expenditures and $10.2 million related to business acquisitions. Capital expenditures included $4.7 million in costs related to our ERP project.
Cash flows attributable to our financing activities. For the year ended December 31, 2016, net cash used in financing activities was $6.0 million, consisting primarily of $7.6 million of cash related to the purchase of stock pursuant to our stock repurchase plan, $4.0 million of net cash used for debt repayments and $2.5 million of contingent and deferred consideration payments, partially offset by $11.1 million of net cash generated from the issuance of common stock and exercise of stock options.
For the seven months ended December 31, 2015, net cash provided by financing activities was $283.7 million consisting primarily of $293.0 million of net borrowings related to our Credit Facility principally to fund the Qualspec acquisition and $2.1 million from the issuance of common stock from share-based payment arrangements. These amounts were partially offset by $5.9 million for the acquisition of the noncontrolling interest in Quest Integrity, $2.3 million in deferred consideration payments and $2.0 million related to debt issuance costs.
For the year ended May 31, 2015, net cash used in financing activities was $10.1 million, consisting primarily of $21.1 million of cash related to the purchase of stock pursuant to our stock repurchase plan partially offset by $8.0 million of borrowings.
For the year ended May 31, 2014, net cash used in financing activities was $9.6 million, consisting primarily of $13.3 million of cash related to the purchase of stock pursuant to our stock repurchase plan partially offset by $5.3 million provided by the issuance of common stock from share-based payment arrangements.
Effect of exchange rate changes on cash. For the year ended December 31, 2016, the effect of foreign exchange rate changes on cash was a negative impact of $1.3 million. The negative impact in the current period is primarily attributable to changes in U.S. Dollar exchange rates with the British Pound.
For the seven months ended December 31, 2015, the effect of foreign exchange rate changes on cash was a negative impact of $1.6 million. The negative impact in the current period is primarily attributable to changes in U.S. Dollar exchange rates with Canada, Europe and Malaysia.
For the years ended May 31, 2015 and 2014, the effect of foreign exchange rate changes on cash was a negative impact of $3.1 million and $2.2 million, respectively. The negative impact in 2015 was primarily attributable to changes in U.S. Dollar exchange rates with Canada and Europe. The negative impact in 2014 was primarily due to changes in U.S. Dollar exchange rates with Canada and Venezuela.

30

Table of Contents

Contractual Obligations
A summary of contractual obligations as of December 31, 2016 is as follows (in thousands):
 
 
Less than 1 year
 
1-3 years
 
3-5 years
 
More than 5 years
 
Total
Long-term debt obligations
$
20,000

 
$
40,000

 
$
306,911

 
$

 
$
366,911

Operating lease obligations
32,418

 
42,647

 
18,766

 
16,295

 
110,126

Defined benefit pension plan contribution obligations
1,481

 
3,088

 
3,265

 
9,009

 
16,843

Total
$
53,899

 
$
85,735

 
$
328,942

 
$
25,304

 
$
493,880

The table above excludes interest on our Credit Facility. We cannot predict with any certainty the amount of interest due to the expected variability of interest rates and principal amounts outstanding. If we assume interest payment amounts are calculated using the outstanding principal balances and interest rates as of December 31, 2016, the estimated interest payments on our Credit Facility would be approximately $10 million for 2017 and 2018, approximately $9 million for 2019 and approximately $4 million for 2020 for a total of approximately $33 million over the remaining contractual period.
A summary of long-term debt and other long-term obligations as of December 31, 2016 and 2015 is as follows (in thousands):
 
 
December 31,
 
December 31,
 
2016
 
2015
Credit facility
$
366,911

 
$
371,383

Current maturities
(20,000
)
 
(20,000
)
Long-term debt, excluding current maturities
$
346,911

 
$
351,383

Outstanding letters of credit
$
21,600

 
$
13,218

Leasing arrangements
$
110,126

 
$
81,437

Defined benefit pension liability
$
21,239

 
$

Other long-term liabilities
$
2,592

 
$

Critical Accounting Policies
The process of preparing financial statements in accordance with GAAP requires our management to make estimates and judgments. It is possible that materially different amounts could be recorded if these estimates and judgments change or if actual results differ from these estimates and judgments. We have identified the following six critical accounting policies that require a significant amount of estimation and judgment and are considered to be important to the portrayal of our financial position and results of operations:
Revenue Recognition
Goodwill and Intangible Assets
Income Taxes
Workers’ Compensation, Auto, Medical and General Liability Accruals
Allowance for Doubtful Accounts
Estimated Useful Lives
Revenue recognition. Most of our projects are short-term in nature and we predominantly derive revenues by providing a variety of industrial services on a time and material basis. For all of these services, our revenues are recognized when services are rendered or when product is shipped to the job site and risk of ownership passes to the customer. However, due to various contractual terms with our customers, at the end of any reporting period, there may be earned but unbilled revenue that is accrued to properly match revenues with related costs. At December 31, 2016 and December 31, 2015, the amount of earned but unbilled revenue included in accounts receivable was $39.7 million, $47.1 million, respectively.

31

Table of Contents

Goodwill and intangible assets. We allocate the purchase price of acquired businesses to their identifiable tangible assets and liabilities, such as accounts receivable, inventory, property, plant and equipment, accounts payable and accrued liabilities. We also allocate a portion of the purchase price to identifiable intangible assets, such as non-compete agreements, trademarks, trade names, patents, technology and customer relationships. Allocations are based on estimated fair values of assets and liabilities. We use all available information to estimate fair values including quoted market prices, the carrying value of acquired assets, and widely accepted valuation techniques such as discounted cash flows. Certain estimates and judgments are required in the application of the fair value techniques, including estimates of future cash flows, selling prices, replacement costs, economic lives and the selection of a discount rate, and it involves using of Level 3 measurements as defined in Financial Accounting Standards Board (“FASB”) Accounting Standards Codification (“ASC”) 820 Fair Value Measurements and Disclosure (“ASC 820”). Deferred taxes are recorded for any differences between the assigned values and tax bases of assets and liabilities. Estimated deferred taxes are based on available information concerning the tax bases of assets acquired and liabilities assumed and loss carryforwards at the acquisition date, although such estimates may change in the future as additional information becomes known. Any remaining excess of cost over allocated fair values is recorded as goodwill. We typically engage third-party valuation experts to assist in determining the fair values for both the identifiable tangible and intangible assets. The judgments made in determining the estimated fair value assigned to each class of assets acquired and liabilities assumed, as well as asset lives, could materially impact our results of operations.
Goodwill and intangible assets acquired in a purchase business combination and determined to have an indefinite useful life are not amortized, but are instead tested for impairment at least annually in accordance with the provisions of the ASC 350, Intangibles—Goodwill and Other (“ASC 350”). Intangible assets with estimated useful lives are amortized over their respective estimated useful lives up to their estimated residual values and reviewed for impairment in accordance with ASC 350. We assess goodwill for impairment at the reporting unit level, which we have determined to be the same as our operating segments. Each reporting unit has goodwill relating to past acquisitions.
The test for impairment was performed at the reporting unit level which is deemed to be at the operating segment level. The test was a two-step process that involved comparing the estimated fair value of each reporting unit to the reporting unit’s carrying value, including goodwill. If the fair value of a reporting unit exceeded its carrying amount, the goodwill of the reporting unit was not considered impaired; therefore, the second step of the impairment test would not be deemed necessary. If the carrying amount of the reporting unit exceeded its fair value, we would then perform a second step to the goodwill impairment test to measure the amount of goodwill impairment loss to be recorded. With the change in our fiscal year end to December 31 of each calendar year, our goodwill annual test date is now December 1, effective December 1, 2015. We performed our impairment testing as of December 1, 2016 and 2015 and concluded that there was no impairment.
The fair values of the reporting units at December 1, 2016 and 2015 were determined using a method based on discounted cash flow models with estimated cash flows based on internal forecasts of revenue and expenses over a five-year period plus a terminal value period (the income approach). The income approach estimated fair value by discounting each reporting unit’s estimated future cash flows using a discount rate that approximated our weighted-average cost of capital. Major assumptions applied in an income approach include forecasted growth rates as well as forecasted profitability by reporting unit. The fair value derived from the income approach, in the aggregate, approximated our market capitalization. At December 1, 2016, our market capitalization exceeded the carrying value of our consolidated net assets by approximately $437 million or 80%, and the fair value of each reporting unit significantly exceeded its respective carrying amount as of that date. At December 1, 2015, our market capitalization exceeded the carrying value of our consolidated net assets by approximately $482 million or 141%, and the fair value of each reporting unit significantly exceeded its respective carrying amount as of that date.
There was $355.8 million and $256.7 million of goodwill at December 31, 2016, December 31, 2015, respectively. A summary of goodwill is as follows (in thousands):
 
 
Twelve Months Ended
December 31, 2016
 
TeamQualspec
 
TeamFurmanite
 
Quest Integrity
 
Total
Balance at beginning of year
$
207,497

 
$
19,874

 
$
29,283

 
$
256,654

Acquisitions
5,955

 
89,646

 
4,137

 
99,738

Foreign currency adjustments
23

 
(461
)
 
(168
)
 
(606
)
Balance at end of year
$
213,475

 
$
109,059

 
$
33,252

 
$
355,786



32

Table of Contents

 
Seven Months Ended
December 31, 2015
 
TeamQualspec
 
TeamFurmanite
 
Quest Integrity
 
Total
Balance at beginning of period
$
60,737

 
$
17,466

 
$
29,570

 
$
107,773

Acquisitions
148,482

 
2,483

 

 
150,965

Foreign currency adjustments
(1,722
)
 
(75
)
 
(287
)
 
(2,084
)
Balance at end of period
$
207,497

 
$
19,874

 
$
29,283

 
$
256,654

     
Income taxes. We follow the guidance of ASC 740, Income Taxes (“ASC 740”) which requires that we use the asset and liability method of accounting for deferred income taxes and provide deferred income taxes for all significant temporary differences. As part of the process of preparing our consolidated financial statements, we are required to estimate our income taxes in each of the jurisdictions in which we operate. This process involves estimating our actual current tax payable and related tax expense together with assessing temporary differences resulting from differing treatment of certain items, such as depreciation, for tax and accounting purposes. These differences can result in deferred tax assets and liabilities, which are included within our consolidated balance sheets.
In accordance with ASC 740, we are required to assess the likelihood that our deferred tax assets will be realized and, to the extent we believe that it is more likely than not (a likelihood of more than 50%) that some portion or all of the deferred tax assets will not be realized, we must establish a valuation allowance. We consider all available evidence to determine whether, based on the weight of the evidence, a valuation allowance is needed. Evidence used includes information about our current financial position and our results of operations for the current and preceding years, as well as all currently available information about future years, including our anticipated future performance, the reversal of existing taxable temporary differences and tax planning strategies.
Management believes future sources of taxable income, reversing temporary differences and other tax planning strategies will be sufficient to realize assets for which no reserve has been established. While we have considered these factors in assessing the need for a valuation allowance, there is no assurance that a valuation allowance would not need to be established in the future if information about future years change. Any change in the valuation allowance would impact our income tax provision and net income (loss) in the period in which such a determination is made. As of December 31, 2016, we believe that it is more likely than not that we will have sufficient reversals of temporary differences and future taxable income to allow us to realize the benefits of the net deferred tax assets except for those primarily related to net operating loss carry forwards of certain foreign subsidiaries in the amount $41.0 million. Our belief is based upon our record of historical earnings levels in recent years and projections of future taxable income over the periods in which the future deductible temporary differences become deductible. As of December 31, 2016, our deferred tax assets were $67.7 million, less a valuation allowance of $13.2 million. As of December 31, 2016, our deferred tax liabilities were $125.1 million.
Significant judgment is required in assessing the timing and amounts of deductible and taxable items for tax purposes. In accordance with ASC 740-10, we establish reserves for uncertain tax positions when, despite our belief that our tax return positions are supportable, we believe that it is not more likely than not that the position will be sustained upon challenge. When facts and circumstances change, we adjust these reserves through our provision for income taxes. To the extent interest and penalties may be assessed by taxing authorities on any related underpayment of income tax, such amounts have been accrued and are classified as a component of income tax provision (benefit) in our consolidated statements of operations. As of December 31, 2016, our unrecognized tax benefits related to uncertain tax positions were $0.9 million.
Workers’ compensation, auto, medical and general liability accruals. In accordance with ASC 450, Contingencies (“ASC 450”), we record a loss contingency when it is probable that a liability has been incurred and the amount of the loss can be reasonably estimated. We review our loss contingencies on an ongoing basis to ensure that we have appropriate reserves recorded on our balance sheet. These reserves are based on historical experience with claims incurred but not received, estimates and judgments made by management, applicable insurance coverage for litigation matters, and are adjusted as circumstances warrant. For workers’ compensation, our self-insured retention is $1.0 million and our automobile liability self-insured retention is currently $500,000 per occurrence. For general liability claims we have an effective self-insured retention of $3.0 million per occurrence. For medical claims, our self-insured retention is $350,000 per individual claimant determined on an annual basis. For environmental liability claims, our self-insured retention is $1.0 million per occurrence. We maintain insurance for claims that exceed such self-retention limits. The insurance is subject to terms, conditions, limitations and exclusions that may not fully compensate us for all losses. Furmanite was incorporated into our existing insurance coverage during 2016, but for certain items it maintained separate insurance policies during portions of 2016 and accordingly maintained separate self-insurance retention amounts, with such self-retention amounts generally below the levels noted above. Our estimates and judgments could change based on new information, changes in laws or regulations, changes in management’s

33

Table of Contents

plans or intentions, or the outcome of legal proceedings, settlements or other factors. If different estimates and judgments were applied with respect to these matters, it is likely that reserves would be recorded for different amounts.
Allowance for doubtful accounts. In the ordinary course of business, a portion of our accounts receivable are not collected due to billing disputes, customer bankruptcies, dissatisfaction with the services we performed and other various reasons. We establish an allowance to account for those accounts receivable that we estimate will eventually be deemed uncollectible. The allowance for doubtful accounts is based on a combination of our historical experience and management’s review of long outstanding accounts receivable.
Estimated useful lives. The estimated useful lives of our long-lived assets are used to compute depreciation expense, future asset retirement obligations and are also used in impairment testing. Estimated useful lives are based, among other things, on the assumption that we provide an appropriate level of associated capital expenditures and maintenance while the assets are still in operation. Without these continued associated capital expenditures and maintenance, the useful lives of these assets could decrease significantly. Estimated useful lives could be impacted by such factors as future energy prices, environmental regulations, various legal factors and competition. If the useful lives of these assets were found to be shorter than originally estimated, depreciation expense may increase, liabilities for future asset retirement obligations may be insufficient and impairments in carrying values of tangible and intangible assets may result.
New Accounting Principles
For information about newly adopted accounting principles as well as information about new accounting principles pending adoption, see Note 1 to the consolidated financial statements.
QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
We have operations in foreign countries with a functional currency that is not the U.S. Dollar. We are exposed to market risk, primarily related to foreign currency fluctuations related to these operations. Subsidiaries with asset and liability balances denominated in currencies other than their functional currency are remeasured in the preparation of their financial statements using a combination of current and historical exchange rates, with any resulting remeasurement adjustments included in net income (loss) for the period. Net foreign currency transaction gains for the year ended December 31, 2016 were $0.1 million. The foreign currency transaction gains realized in the year ended December 31, 2016 reflect the effects of fluctuations in the U.S. Dollar relative to the currencies we have exposure to, including but not limited to, the Australian Dollar, Brazilian Real, British Pound, Canadian Dollar, Euro, Malaysian Ringgit and Mexican Peso.

In 2015, we initiated a foreign currency hedging program to mitigate the foreign currency risk in countries where we have significant assets and liabilities denominated in currencies other than the functional currency. We utilize monthly foreign currency swap contracts to reduce exposures to changes in foreign currency exchange rates related to our largest exposures including, but not limited to the Australian Dollar, Canadian Dollar, Brazilian Real, British Pound, Euro, Malaysian Ringgit and Mexican Peso. The impact from these swap contracts was not material as of and for the year ended December 31, 2016, as of and for the seven months ended December 31, 2015 nor for the year ended May 31, 2015.
Translation adjustments for the assets and liability accounts are included as a separate component of accumulated other comprehensive loss in shareholders’ equity. Foreign currency translation losses recognized in other comprehensive loss were $3.8 million for the year ended December 31, 2016.
For the year ended December 31, 2016, we had foreign currency-based revenues and operating income of $306.7 million and $15.0 million, respectively, a hypothetical 10% adverse change in all applicable foreign currencies would result in an annual change in revenues and operating income of $30.7 million and $1.5 million, respectively.
We carry Euro based debt to serve as a hedge of our net investment in our European operations as fluctuations in the fair value of the borrowing attributable to the U.S. Dollar/Euro spot rate will offset translation gains or losses attributable to our investment in our European operations. We are exposed to market risk, primarily related to foreign currency fluctuations related to the unhedged portion of our investment in our European operations.
We hold certain floating-rate obligations. We are exposed to market risk primarily related to potential increases in interest rates related to our debt.

34

Table of Contents





Report of Independent Registered Public Accounting Firm
The Board of Directors and Shareholders
Team, Inc.:
We have audited Team, Inc. and subsidiaries’ internal control over financial reporting as of December 31, 2016, based on criteria established in Internal Control—Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Annual Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit.
We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audit also included performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
In our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2016, based on criteria established in Internal Control—Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO).
Team, Inc. acquired Furmanite Corporation (Furmanite) in February 2016, and management excluded from its assessment of the effectiveness of Team, Inc.’s internal control over financial reporting as of December 31, 2016, Furmanite’s internal control over financial reporting associated with total assets of $215 million and total revenues of $216 million included in the consolidated financial statements of Team, Inc. and subsidiaries as of and for the year ended December 31, 2016. Our audit of internal control over financial reporting of Team, Inc. also excluded an evaluation of the internal control over financial reporting of Furmanite.
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of Team, Inc. and subsidiaries as of December 31, 2016 and 2015, and the related consolidated statements of operations, comprehensive income (loss), shareholders’ equity, and cash flows for the year ended December 31, 2016, the seven months ended December 31, 2015 and each of the years in the two-year period ended May 31, 2015, and our report dated March 15, 2017 expressed an unqualified opinion on those consolidated financial statements.
(signed) KPMG LLP
Houston, Texas
March 15, 2017

35

Table of Contents

Report of Independent Registered Public Accounting Firm
The Board of Directors and Shareholders
Team, Inc.:
We have audited the accompanying consolidated balance sheets of Team, Inc. and subsidiaries as of December 31, 2016 and 2015, and the related consolidated statements of operations, comprehensive income (loss), shareholders’ equity, and cash flows for the year ended December 31, 2016, the seven months ended December 31, 2015 and each of the years in the two-year period ended May 31, 2015. These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits.
We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.
In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Team, Inc. and subsidiaries as of December 31, 2016 and 2015, and the results of their operations and their cash flows for the year ended December 31, 2016, the seven months ended December 31, 2015 and each of the years in the two-year period ended May 31, 2015, in conformity with U.S. generally accepted accounting principles.
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Team, Inc.’s internal control over financial reporting as of December 31, 2016, based on criteria established in Internal Control—Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO), and our report dated March 15, 2017 expressed an unqualified opinion on the effectiveness of the Company’s internal control over financial reporting.
(signed) KPMG LLP
Houston, Texas
March 15, 2017


36

Table of Contents

TEAM, INC. AND SUBSIDIARIES
CONSOLIDATED BALANCE SHEETS
(in thousands, except share and per share data)
 
 
December 31,
 
2016
 
2015
ASSETS
 
 
 
Current assets:
 
 
 
Cash and cash equivalents
$
46,216

 
$
44,825

Restricted cash

 
5,000

Receivables, net of allowance of $7,835 and $3,548
262,773

 
214,324

Inventory
49,571

 
27,936

Income tax receivable
512

 
3,893

Deferred income taxes
16,521

 
6,917

Prepaid expenses and other current assets
25,764

 
11,664

Total current assets
401,357

 
314,559

Property, plant and equipment, net
203,130

 
124,983

Intangible assets, net of accumulated amortization of $37,309 and $21,161
176,104

 
99,119

Goodwill
355,786

 
256,654

Other assets, net
4,826

 
2,421

Deferred income taxes
6,215

 
1,255

Total assets
$
1,147,418

 
$
798,991

LIABILITIES AND EQUITY
 
 
 
Current liabilities:
 
 
 
Current-portion of long term debt
$
20,000

 
$
20,000

Accounts payable
47,817

 
22,364

Other accrued liabilities
79,904

 
49,796

Total current liabilities
147,721

 
92,160

Deferred income taxes
93,318

 
17,302

Long-term debt
346,911

 
351,383

Defined benefit pension liability
21,239

 

Other long-term liabilities
2,592

 

Total liabilities
611,781

 
460,845

Commitments and contingencies

 

Equity:
 
 

Preferred stock, 500,000 shares authorized, none issued

 

Common stock, par value $0.30 per share, 60,000,000 shares authorized; 29,784,734 and 21,836,694 shares issued
8,934

 
6,552

Additional paid-in capital
336,756

 
120,126

Retained earnings
218,947

 
250,980

Accumulated other comprehensive loss
(29,000
)
 
(18,374
)
Treasury stock at cost, 0 and 546,977 shares

 
(21,138
)
Total equity
535,637

 
338,146

Total liabilities and equity
$
1,147,418

 
$
798,991

 
See accompanying notes to consolidated financial statements.


37

Table of Contents

TEAM, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF OPERATIONS
(in thousands, except per share data)
 
 
Twelve Months Ended
December 31,
 
Seven Months Ended
December 31,
 
Twelve Months Ended
May 31,
 
2016
 
2015
 
2015
 
2014
Revenues
$
1,196,696

 
$
571,718

 
$
842,047

 
$
749,527

Operating expenses
868,144

 
409,391

 
584,054

 
527,611

Gross margin
328,552

 
162,327

 
257,993

 
221,916

Selling, general and administrative expenses
323,973

 
142,643

 
189,528

 
171,455

Exit costs and other related charges
5,513

 

 

 

Loss (gain) on revaluation of contingent consideration
2,184

 
522

 

 
(2,138
)
Earnings from unconsolidated affiliates

 

 

 
822

Operating income (loss)
(3,118
)
 
19,162

 
68,465

 
53,421

Interest expense, net
12,667

 
4,898

 
2,489

 
2,851

Loss on investment in Venezuela

 

 
1,177

 

Foreign currency (gain) loss
(93
)
 
813

 
1,509

 
4,185

Other expense (income), net
(34
)
 

 

 

Earnings (loss) from continuing operations before income taxes
(15,658
)
 
13,451

 
63,290

 
46,385

Less: Provision (benefit) for income taxes (see Note 8)
(3,093
)
 
4,573

 
22,793

 
16,236

Income (loss) from continuing operations
(12,565
)
 
8,878

 
40,497

 
30,149

Loss from discontinued operations, net of income tax
(111
)
 

 

 

Net income (loss)
(12,676
)
 
8,878

 
40,497

 
30,149

Less: Income attributable to noncontrolling interest

 

 
427

 
294

Net income (loss) available to Team shareholders
$
(12,676
)
 
$
8,878

 
$
40,070

 
$
29,855

 
 
 
 
 
 
 
 
Basic earnings (loss) per share:
 
 
 
 
 
 
 
Continuing operations
$
(0.45
)
 
$
0.43

 
$
1.95

 
$
1.46

Discontinued operations

 

 

 

Net income (loss)
$
(0.45
)
 
$
0.43

 
$
1.95

 
$
1.46

 
 
 
 
 
 
 
 
Diluted earnings (loss) per share:
 
 
 
 
 
 
 
Continuing operations
$
(0.45
)
 
$
0.41

 
$
1.85

 
$
1.40

Discontinued operations

 

 

 

Net income (loss)
$
(0.45
)
 
$
0.41

 
$
1.85

 
$
1.40

 
 
 
 
 
 
 
 
Amounts attributable to Team shareholders:
 
 
 
 
 
 
 
Income (loss) from continuing operations, net of income tax
$
(12,565
)
 
$
8,878

 
$
40,070

 
$
29,855

Loss from discontinued operations, net of income tax
(111
)
 

 

 

Net income (loss)
$
(12,676
)
 
$
8,878

 
$
40,070

 
$
29,855

 
See accompanying notes to consolidated financial statements.


38

Table of Contents

TEAM, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME (LOSS)
(in thousands)
 
 
Twelve Months Ended
December 31,
 
Seven Months Ended
December 31,
 
Twelve Months Ended
May 31,
 
2016
 
2015
 
2015
 
2014
Net income (loss)
$
(12,676
)
 
$
8,878

 
$
40,497

 
$
30,149

Foreign currency translation adjustment
(3,849
)
 
(7,228
)
 
(15,822
)
 
(1,613
)
Foreign currency hedge
481

 
101

 
3,237

 
(775
)
Net actuarial loss on defined benefit pension plans
(10,518
)
 

 

 

Tax benefit attributable to other comprehensive loss
3,260

 
2,291

 
1,655

 
1,498

Total comprehensive income (loss)
(23,302
)
 
4,042

 
29,567

 
29,259

Less: Total comprehensive income attributable to noncontrolling interest

 

 
356

 
294

Total comprehensive income (loss) available to Team shareholders
$
(23,302
)
 
$
4,042

 
$
29,211

 
$
28,965

 
See accompanying notes to consolidated financial statements.


39

Table of Contents

TEAM, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF SHAREHOLDERS’ EQUITY
(in thousands)
 
 
Common
Shares
 
Treasury
Shares
 
Common
Stock
 
Treasury
Stock
 
Additional
Paid in
Capital
 
Noncontrolling
Interest
 
Retained
Earnings
 
Accumulated
Other
Comprehensive
Income (Loss)
 
Total
Shareholders’
Equity
Balance at June 1, 2013
20,588

 
(90
)
 
$
6,176

 
$
(1,344
)
 
$
99,278

 
$
5,384

 
$
184,485

 
$
(1,789
)
 
$
292,190

Net income

 

 

 

 

 

 
30,149

 

 
30,149

Foreign currency translation adjustment, net of tax

 

 

 

 

 

 

 
(400
)
 
(400
)
Foreign currency hedge, net of tax

 

 

 

 

 

 

 
(490
)
 
(490
)
Comprehensive income attributable to noncontrolling interest

 

 

 

 

 
294

 
(294
)
 

 

Non-cash compensation

 

 

 

 
4,239

 

 

 

 
4,239

Vesting of stock awards
117

 

 
34

 

 
(1,744
)
 

 

 

 
(1,710
)
Tax effect of share-based payment arrangements

 

 

 

 
1,131

 

 

 

 
1,131

Exercise of stock options
232

 

 
70

 

 
5,200

 

 

 

 
5,270

Purchase of treasury stock

 
(369
)
 

 
(13,334
)
 

 

 

 

 
(13,334
)
Retirement of treasury stock
(459
)
 
459

 
(138
)
 
14,678

 
(2,232
)
 

 
(12,308
)
 

 

Balance at May 31, 2014
20,478

 

 
6,142

 

 
105,872

 
5,678

 
202,032

 
(2,679
)
 
317,045

Net income

 

 

 

 

 

 
40,497

 

 
40,497

Foreign currency translation adjustment, net of tax

 

 

 

 

 

 

 
(13,263
)
 
(13,263
)
Foreign currency hedge, net of tax

 

 

 

 

 

 

 
2,333

 
2,333

Comprehensive income attributable to noncontrolling interest

 

 

 

 

 
356

 
(427
)
 
71

 

Non-cash compensation

 

 

 

 
4,838

 

 

 

 
4,838

Vesting of stock awards
106

 

 
33

 

 
(1,808
)
 

 

 

 
(1,775
)
Tax effect of share-based payment arrangements

 

 

 

 
3,034

 

 

 

 
3,034

Exercise of stock options
325

 

 
98

 

 
3,706

 

 

 

 
3,804

Purchase of treasury stock

 
(547
)
 

 
(21,138
)
 

 

 

 

 
(21,138
)
Balance at May 31, 2015
20,909

 
(547
)
 
6,273

 
(21,138
)
 
115,642

 
6,034

 
242,102

 
(13,538
)
 
335,375

Net income

 

 

 

 

 

 
8,878

 

 
8,878

Foreign currency translation adjustment, net of tax

 

 

 

 

 

 

 
(4,898
)
 
(4,898
)
Foreign currency hedge, net of tax

 

 

 

 

 

 

 
62

 
62

Purchase of noncontrolling interest
728

 

 
218

 

 
(118
)
 
(6,034
)
 

 

 
(5,934
)
Non-cash compensation

 

 

 

 
3,522

 

 

 

 
3,522

Vesting of stock awards
89

 

 
27

 

 
(1,402
)
 

 

 

 
(1,375
)
Tax effect of share-based payment arrangements

 

 

 

 
374

 

 

 

 
374

Exercise of stock options
111

 

 
34

 

 
2,108

 

 

 

 
2,142

Balance at December 31, 2015
21,837

 
(547
)
 
6,552

 
(21,138
)
 
120,126

 

 
250,980

 
(18,374
)
 
338,146

Net loss

 

 

 

 

 

 
(12,676
)
 

 
(12,676
)
Foreign currency translation adjustment, net of tax

 

 

 

 

 

 

 
(2,498
)
 
(2,498
)
Foreign currency hedge, net of tax

 

 

 

 

 

 

 
300

 
300

Change in defined benefit pension plan net actuarial loss, net of tax

 

 

 

 

 

 

 
(8,428
)
 
(8,428
)
Non-cash compensation

 

 

 

 
7,313

 

 

 

 
7,313

Vesting of stock awards
142