TRMB 2014 10K
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
___________________________________________________
FORM 10-K
|
| |
ý | ANNUAL REPORT PURSUANT TO SECTION 13 OR 15 (d) OF THE SECURITIES EXCHANGE ACT OF 1934 |
For the fiscal year ended January 2, 2015
OR
|
| |
¨ | TRANSITION REPORT PURSUANT TO SECTION 13 OR 15 (d) OF THE SECURITIES EXCHANGE ACT OF 1934 |
For the transition period from to
Commission File Number: 001-14845
____________________________________________________
TRIMBLE NAVIGATION LIMITED
(Exact name of Registrant as specified in its charter)
|
| | |
California | | 94-2802192 |
(State or other jurisdiction of incorporation or organization) | | (I.R.S. Employer Identification No.) |
| |
935 Stewart Drive, Sunnyvale, CA | | 94085 |
(Address of principal executive offices) | | (Zip Code) |
Registrant’s telephone number, including area code: (408) 481-8000
Securities registered pursuant to Section 12(b) of the Act:
|
| | |
Title of each class | | Name of each exchange on which stock registered |
Common Stock | | NASDAQ Global Select Market |
| |
Preferred Share Purchase Rights | | NASDAQ Global Select Market |
(Title of Class) | | |
Securities registered pursuant to Section 12(g) of the Act: NONE
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ý No ¨
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act. Yes ¨ No ý
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ý No ¨
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes ý No ¨
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. ¨
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, or a non-accelerated filer.
|
| | | | | | |
Large Accelerated Filer | ý | | | Accelerated Filer | | ¨ |
Non-accelerated Filer | o | (Do not check if a smaller reporting company) | | Smaller Reporting Company | | ¨ |
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ¨ No ý
As of July 4, 2014, the aggregate market value of the common stock held by non-affiliates of the registrant was approximately $9.1 billion based on the closing price as reported on the NASDAQ Global Select Market. Shares of common stock held by each officer
and director of the registrant have been excluded in that such person may be deemed to be an affiliate. This determination of affiliate status is not necessarily a conclusive determination for any other purpose.
Indicate the number of shares outstanding of each of the issuer’s classes of common stock, as of the latest practicable date.
|
| | |
Class | | Outstanding at February 20, 2015 |
Common stock, no par value | | 259,176,857 shares |
DOCUMENTS INCORPORATED BY REFERENCE
Certain parts of Trimble Navigation Limited’s Proxy Statement relating to the annual meeting of stockholders to be held on May 7, 2015 (the “Proxy Statement”) are incorporated by reference into Part III of this Annual Report on Form 10-K.
SPECIAL NOTE ON FORWARD-LOOKING STATEMENTS
This Annual Report on Form 10-K contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934, which are subject to the “safe harbor” created by those sections. These statements include, among other things:
| |
• | the portion of our revenue coming from sales to international customers; |
| |
• | seasonal fluctuations in our construction and agricultural equipment business revenues and macroeconomic conditions; |
| |
• | our plans to continue to invest in research and development at a rate consistent with our past, to develop and introduce new products, to improve our competitive position and to enter new markets; |
| |
• | our potential exposure in connection with pending proceedings; |
| |
• | our belief that our cash and cash equivalents, together with borrowings under the 2014 Credit Facility, as described below, will be sufficient to meet our anticipated operating cash needs, debt service, planned capital expenditures, and stock purchases under the stock repurchase program for at least the next twelve months; |
| |
• | our expectation that planned capital expenditures will constitute a partial use of our cash resources; and |
| |
• | fluctuations in interest rates. |
The forward-looking statements regarding future events and the future results of Trimble Navigation Limited (“Trimble” or “the Company” or “we” or “our” or “us”) are based on current expectations, estimates, forecasts, and projections about the industries in which Trimble operates and the beliefs and assumptions of the management of Trimble. Discussions containing such forward-looking statements may be found in “Management’s Discussion and Analysis of Financial Condition and Results of Operations.” In some cases, forward-looking statements can be identified by terminology such as “may,” “will,” “should,” “could,” “predicts,” “potential,” “continue,” “expects,” “anticipates,” “future,” “intends,” “plans,” “believes,” “estimates,” and similar expressions. These forward-looking statements involve certain risks and uncertainties that could cause actual results, levels of activity, performance, achievements, and events to differ materially from those implied by such forward-looking statements, but are not limited to those discussed in this Report under the section entitled “Risk Factors” and elsewhere, and in other reports Trimble files with the Securities and Exchange Commission (“SEC”), specifically the most recent reports on Form 8-K and Form 10-Q, each as it may be amended from time to time. These forward-looking statements are made as of the date of this Annual Report on Form 10-K. We reserve the right to update these statements for any reason, including the occurrence of material events. The risks and uncertainties under the caption “Risks and Uncertainties” contained herein, among other things, should be considered in evaluating our prospects and future financial performance.
TRIMBLE NAVIGATION LIMITED
2014 FORM 10-K ANNUAL REPORT
TABLE OF CONTENTS
|
| | |
| | |
| PART I | |
Item 1 | | |
Item 1A | | |
Item 1B | | |
Item 2 | | |
Item 3 | | |
Item 4 | | |
| | |
| PART II | |
Item 5 | | |
Item 6 | | |
Item 7 | | |
Item 7A | | |
Item 8 | | |
Item 9 | | |
Item 9A | | |
Item 9B | | |
| | |
| PART III | |
Item 10 | | |
Item 11 | | |
Item 12 | | |
Item 13 | | |
Item 14 | | |
| | |
| PART IV | |
Item 15 | | |
PART I
Trimble Navigation Limited, a California corporation is a leading provider of technology solutions that enable professionals and field mobile workers to improve or transform their work processes. Our solutions are used across a range of industries including agriculture, architecture, civil engineering, survey and land administration, construction, geospatial, environmental management, government, natural resources, transportation and utilities. Representative Trimble customers include engineering and construction firms, contractors, surveying companies, farmers and agricultural companies, enterprise firms with large-scale fleets, energy, mining and utility companies, and state, federal and municipal governments.
Our focus is on integrating our broad technological and application capabilities to create system-level solutions that transform how work is done within the industries we serve. Our products are sold based on return on investment and provide benefits such as lower operational costs, higher productivity, improved quality, enhanced safety and regulatory compliance, and reduced environmental impact. Representative products include equipment that automates large industrial equipment such as tractors and bulldozers; integrated systems that track fleets of vehicles and workers and provide real-time information and powerful analytics to the back-office; data collection systems that enable the management of large amounts of geo-referenced information; software solutions that connect all aspects of a construction site or a farm; and building information modeling (BIM) software that is used throughout the design, build, and operation of buildings.
Our customers increasingly demand integration of individual point solutions, whether hardware sensors or software applications, in order to improve their complete work processes. Our solutions provide the connections between hardware and applications, rather than requiring customers to integrate point solutions on their own. We also increasingly provide additional services (training, consulting, and integration services) to link our solutions with existing customer workflow solutions, such as ERP systems.
Many of our products integrate positioning or location technologies with wireless communications and software or information technologies. Information about location or position is transmitted via a wireless link to a domain-specific software application which enhances the productivity of the worker, asset or work process. Position is provided through a number of technologies including the Global Positioning System (GPS), other Global Navigation Satellite Systems (GNSS) and their augmentation systems, and systems that use laser, optical, inertial or other technologies to establish position. Integration of wireless communications in our solutions facilitates real-time data flow, communication and situational awareness across sites and between work sites or vehicles and offices.
Software is a key element of most of our solutions and accounts for a steadily increasing portion of our business. Our software products range from embedded real-time firmware, through field service and location oriented solutions on handheld and other small footprint devices, to scalable server-based solutions that integrate field data with large scale enterprise back-office applications. Many of our software solutions are built on configurable and enterprise grade scalable platforms that can be tailored to the workflows that our customers follow to implement their customized business processes. Our software capabilities include extensive 3-D modeling, analysis and design platforms, civil engineering alignment selection solutions, design and data preparation software, BIM software, cloud-based collaboration solutions, applications for advanced surveying and geospatial data collection and analysis, as well as a large suite of domain-specific software applications used across a host of industries including agriculture, construction, utilities, transportation and natural resources. Our software is sold as a perpetual license or as a subscription, and can be delivered for on-premise installation or in a hosted environment as Software as a Service (SaaS). Our software products allow our customers to improve their productivity, gain insight into their projects and operations, to enhance their decision making and to gain maximum benefit from a broad range of other Trimble products and systems.
Our global operations include major development, manufacturing, or logistics operations in the United States, Sweden, Finland, Germany, New Zealand, Canada, the United Kingdom, the Netherlands, China, and India. Products are typically sold through dealers, representatives, joint ventures, and other channels throughout the world, in more than 100 countries. These channels are supported by our own offices located in 35 countries around the world. We also sell products directly to end-users.
We began operations in 1978 and incorporated in California in 1981. Our common stock has been publicly traded on NASDAQ since 1990 under the symbol TRMB.
Business Strategy
Our growth strategy is centered on multiple elements:
| |
• | Focus on attractive markets with significant growth and profitability potential - We focus on large markets historically underserved by technology that offer significant potential for long-term revenue growth, profitability and market leadership. Our core industries such as construction, agriculture, and transportation markets are each multi-trillion dollar |
global industries which operate in increasingly demanding environments with technology adoption in the early phases relative to other industries. With the emergence of mobile computing capabilities, the increasing technological know-how of end users and compelling return on investment, we believe many of our markets are ripe for substituting Trimble’s technology and solutions in place of traditional operating methods.
| |
• | Domain knowledge and technological innovation that benefit a diverse customer base We have over time redefined our technological focus from hardware-driven point solutions to integrated work process solutions by developing domain expertise and heavily reinvesting in R&D, capital expenditures and acquisitions. We have been spending approximately 13% of revenue historically on R&D and currently have approximately 1100 unique patents. We intend to continue to leverage our divisional structure to take advantage of our technology portfolio and deep domain knowledge to quickly and cost-effectively deliver specific, targeted solutions to each of the vertical markets we serve. We look for opportunities where the need for technological change is high and which have a requirement for the integration of multiple technologies into complete vertical solutions. |
| |
• | Increasing focus on software and services - Software and services are increasingly important elements of our solutions and are core to our growth strategy. Trimble generally has an open application programming interface (API) philosophy and open vendor environment which leads to increased adoption of our software offerings. Professional services constitute an additional growth channel that helps our customers integrate and optimize the use of our offerings in their environment. The increased recurring revenue from these solutions will provide us with enhanced business visibility over time. |
| |
• | Geographic expansion with localization strategy - We view international expansion as an important element of our strategy and we continue to position ourselves in geographic markets that will serve as important sources of future growth. We currently have a physical presence in over 35 countries and third party representation in over 100 countries. In 2014, 52% of our sales occurred in countries outside of the U.S. |
| |
• | Optimized distribution channels to best access our markets - We utilize vertically-focused distribution channels that leverage domain expertise to best serve the needs of individual markets domestically and abroad. These channels include independent dealers, joint ventures, original equipment manufacturers (OEM) sales, and distribution alliances with key partners, such as CNH Global, Caterpillar and Nikon, as well as direct sales to end-users, that provide us with broad market reach and localization capabilities to effectively serve our markets. |
| |
• | Strategic acquisitions - Organic growth continues to be our primary focus, while acquisitions serve to enhance our market position. We acquire businesses that bring technology, products, or distribution capabilities that augment our portfolio and allow us to penetrate existing markets more effectively, or to establish a market beachhead. Our level of success in targeting and effectively integrating acquisitions is an important aspect of our growth strategy. |
Business Segments and Markets
We are organized into four reporting segments encompassing our various applications and product lines: Engineering and Construction, Field Solutions, Mobile Solutions and Advanced Devices. Our segments are distinguished by the markets they serve. Each segment consists of businesses which are responsible for product development, marketing, sales, strategy and financial performance.
Engineering and Construction
The Engineering and Construction segment primarily serves customers working in architecture, engineering, construction, surveying, natural resources and government. Within this segment our most substantial product portfolios are focused on heavy civil construction, building construction, and geospatial.
Heavy Civil Construction. Our heavy civil construction products are used in the planning, design, construction and operation/maintenance of civil infrastructure such as roads, railways, airports, land management, power plants and transmission lines. Our solutions are used across the entire project lifecycle to improve productivity, reduce waste and re-work, and enable more informed decision making through enhanced situational awareness, data flow and project collaboration. At the same time, our solutions can improve worker safety and reduce environmental impact. Our suite of integrated solutions and technologies in this area includes field and office software for optimized route selection and design, systems to automatically guide and control construction equipment such as bulldozers, loaders, graders and paving equipment, systems to monitor, track and manage assets, equipment and workers, and software to facilitate the sharing and communication of data in real time. Together, these solutions are designed to transform how work is done within the heavy civil construction industry.
A key part of our heavy civil construction market portfolio is the Connected Site, which integrates data and information across the entire construction process and across mixed fleets. This includes data from site positioning and machine control systems, construction asset management equipment and services, and various software applications. Utilizing wireless and internet-based site communications infrastructure, our Connected Site solutions include the ability to track and control equipment, perform remote machine diagnostics and reduce re-work. By leveraging the Connected Site technology, contractors gain greater insight into their operations, helping them to lower costs and improve productivity, worker safety, and asset utilization.
To bolster the software solutions we provide to the Connected Site, we formed a joint venture with Caterpillar in October of 2008, called VirtualSite Solutions (VSS). VSS develops software for fleet management and connected worksite solutions, including subscription-based software as a service solutions. VSS solutions are part of the Connected Site portfolio, and are sold through a world-wide independent dealer channel under the name of SITECH. A separate joint venture with Caterpillar, Caterpillar-Trimble Control Technologies (CTCT) was formed in 2002 to develop the next generation of advanced electronic guidance and control products for earthmoving machines. The joint venture develops machine control and guidance products that use site design information combined with accurate positioning technology to automatically control dozer blades and other machine tools. Caterpillar generally offers joint venture products as a factory-installed option, while Trimble focuses on the aftermarket with products for mixed fleets of earthmoving machines from Caterpillar and other equipment manufacturers to allow improved management of construction sites and projects. Effective in January 2014, Caterpillar and Trimble amended the joint ventures and related agreements between the parties to expand the range of productivity applications and services the companies will provide, and to support development of comprehensive unified fleet solutions for the construction industry.
During 2014, we announced a new collaboration with Bentley Systems to provide advanced levels of information mobility in road and site construction. We introduced the Trimble CCS900 Compaction Control System to improve efficiency in bulk earthworks and landfill compaction. When using the system, machine operators can make more uniform and efficient passes, report compaction production data in the field, and ensure target compaction is reached with minimal fuel usage and machine wear. We also announced that the Trimble CenterPoint RTX Correction Service, which provides location accuracy down to four centimeters when used in conjunction with GNSS signals, is now available for heavy civil construction applications.
Building Construction. The Trimble Buildings portfolio of solutions for the commercial, industrial and residential building industry spans the entire lifecycle of a building and is used by architects, designers, general contractors, sub-contractors, engineers, and facility owners or lessees. These solutions serve to improve productivity and to enhance data sharing and collaboration across different teams and stakeholders to help keep projects within cost, time and quality targets. The suite of technologies and solutions we provide to the building industry includes software for 3D conceptual design and modeling, BIM software which is used in design, construction and maintenance, advanced integrated site layout and measurement systems, applications for sub-contractors and trades such as steel, concrete and mechanical, electrical and plumbing, and a best of breed integrated workplace management services (IWMS) software suite for construction project management, project coordination/collaboration, project cost estimation, and capital program and facility management for building owners and managers. Our joint venture with Hilti, a leading global provider of solutions to the building trades, develops products which integrate Trimble’s positioning and asset management technologies with Hilti’s tools capabilities to create smarter tools and smarter construction sites. Together, these solutions for the building industry serve to automate, streamline and transform work processes across the industry. Our solutions provide customer benefits such as reduced costs, reduced waste and re-work, increased efficiencies, faster project completion times, improved information flow, better decision making, and enhanced quality control.
During 2014, we acquired Gehry Technologies, which provides design and project management solutions, consulting services, and project collaboration software tools to enable designers, builders and operators to collaborate more efficiently. In part as a result of this acquisition, we introduced Trimble Connect, a powerful and promising cloud-based collaboration platform that empowers teams involved in the design, construction, and operation of buildings. We also acquired London-based Manhattan Software, a leader in the IWMS space, which extends our portfolio of design-build-operate solutions by providing building owners, facilities and real estate managers with integrated, end-to-end systems for property, asset and facilities management.
We continued to extend our portfolio of building construction solutions in 2014. Our acquisitions in this area include Amtech Group Limited, which provides mechanical, electrical and plumbing specification, design, estimating, procurement, construction management and operation solutions, MAYBIM, which provides 3D BIM software and services to mechanical, electrical and plumbing contractors, and Field 3D, an easy-to-use 3D collaboration software solution for BIM that enables stakeholders in a construction workflow to access complete 3D model information for a building on smartphones and tablets.
During the year, we announced advances in several of our software packages for geospatial analysis and modeling. These included enhanced point cloud processing and management in Trimble Business Center, which enables users to visualize and edit large point clouds while simultaneously working with high-resolution imagery. We released Sketchup 2015, adding major enhancements to the world’s most widely used 3D modeling software. This release includes expansion of the 3D Warehouse, which makes millions of 3D designs available to end users, increased efficiency and interoperability with BIM workflows, and an extension for SketchUp software to enable architects, engineers and geospatial professionals to create models from 3D scanning data collected with Trimble 3D laser scanners.
We announced a major customer win with AECOM, one of the world's largest providers of professional, technical and management support services for transportation, facilities, environment, energy, water and government. AECOM will deploy multiple solutions from Trimble's design-build-operate software portfolio to improve project workflows, increase visibility and accuracy while enhancing team collaboration for construction projects.
Geospatial. In our geospatial business, professional surveyors and engineers providing services to the construction, engineering, mining, oil and gas, energy and utilities, government and land management sectors use our survey and geospatial solutions to replace less productive conventional methods of surveying, mapping, 2D or 3D modeling, measurement, reporting and analysis. Our suite of solutions used in these activities include field based data collection systems and field software, real time communications systems and back-office software for data processing, modeling, reporting and analysis. Our field based technologies are used in handheld, land mobile and airborne applications and incorporate technologies such as mobile application software, high precision GNSS, robotic measurement systems, inertial positioning, 3D laser scanning, digital imaging, optical or laser measurement, and unmanned aerial vehicles. We maintain a joint venture with Nikon which focuses on the design and manufacture in Japan of surveying instruments including mechanical total stations and related products. Our office based products include software for planning, data processing and editing, quality control, 3D modeling, intelligent data analysis and feature extraction, deformation monitoring, project reporting and data export. Our customers in this area gain benefits from the use of our products including significantly improved productivity in both field and office activities, improved safety through non-contact measurement and detection of potentially dangerous ground or structure movement and improved data flow which enables better decision making.
In 2014 we launched Trimble InSphere, a cloud based software platform which enables surveyors, engineers and geographic information systems (GIS) professionals to centrally manage their activities. InSphere applications include Equipment Manager, Data Manager, Data Marketplace and Trimble TerraFlex. Users have the ability to track and manage capital assets with Equipment Manager, an online tracking system linking directly with field equipment location. Data Manager allows users to manage surveying and GIS data in one central location so others may access it at any time from any location and from a mobile device, allowing project tasks to operate in a real time environment. Data Marketplace allows the user to search and quickly buy additional layers of mapping and survey data to create more robust end deliverables across multiple industries. Trimble TerraFlex allows GIS data collection across a fleet of mobile smart devices and professional devices to be aggregated into a single cloud hosted map and exported into different enterprise solutions with file formats or standard cloud services. Trimble InSphere provides the necessary tools for GIS field crews as well as survey and engineering firms to manage business operations by providing the information and services needed to make better decisions on how to use resources and assets.
We sell and distribute our products in the Engineering and Construction segment through multiple global networks of independent dealers with expertise and customer relationships in their respective segments, each supported by Trimble personnel. In 2014, we further expanded our network of SITECH Technology Dealers, which serves the heavy civil construction industry, by adding new dealerships in Poland, northern and northwest Mexico, northeastern Canada, Romania, Ireland, and the United Kingdom, as well as new SITECH locations in the United States for the Midwest, Nebraska, Kansas, Northwestern Missouri and the intermountain region. In November, we announced that we have established more than one hundred SITECH technology dealers worldwide across all regions, including the Americas, Europe, Middle East, Africa, Asia, China, and the South Pacific. We also announced BuildingPoint, an initiative to form a global network of distribution partners to serve the needs of the building construction industry. As of the end of December 2014, there were three BuildingPoint dealers already in place, in the midwestern US, Texas, and Switzerland.
Competitors in this segment are typically companies that provide optical, laser or GNSS positioning products as well as companies that produce software specific to the construction process. Our principal competitors are Topcon Corporation, Hexagon AB and Autodesk. We compete principally on the basis of innovative, differentiated products, service, quality, and geographic reach.
Field Solutions
Our Field Solutions segment primarily addresses the agriculture and GIS markets.
Agriculture. Our precision agriculture products consist of guidance and positioning systems, automated application systems and information management solutions that enable farmers to improve crop performance, profitability and environmental quality. Trimble precision agriculture solutions can assist farmers throughout every step of their farming process, beginning with land preparation and continuing through the planting, nutrient and pest management, and harvesting phases of a crop cycle. We provide manual and automated navigation guidance for tractors and other farm equipment used in spraying, planting, cultivating, and harvesting applications. The benefits to the farmer include faster machine operation, higher yields, and lower consumption of fuel and chemicals than conventional equipment. In addition, we provide solutions to automate application of pesticide and seeding. Our water solutions help farmers minimize their water costs and distribute water more efficiently, and include applications for leveling agricultural fields for irrigation, aligning drainage systems to better manage water flow in fields, monitoring precipitation, and controlling linear and pivot irrigation systems.
During 2014, we continued to develop our precision agriculture portfolio in a number of areas. We introduced Trimble OnSwath technology as part of the Autopilot™ automated steering system. Using OnSwath, the farmer can decrease idle driving time, fuel consumption, soil compaction, crop damage and working time in the field. We also demonstrated our NextSwath technology,
which enables any farm machine to calculate the best possible path to turn around and approach the next crop row or swath. In the water management area, we introduced the Trimble Irrigate-IQ precision irrigation solution in North America. This solution enables farmers to remotely control irrigators via the web, and the Connected Farm Irrigate application enables control of complete pivot irrigation systems on a smartphone or tablet.
Solutions which use data to enhance farm productivity are an increasing focus in our agriculture business. Our Connected Farm solution transfers data wirelessly between the field and office as well as between vehicles operating in the same field. Data can be accessed from the cloud to help manage field records, analyze fleet efficiency, and monitor precipitation data on an acre by acre basis. As a result, farmers make more informed decisions leading to higher yields, better quality crops, increased profitability, and reduced environmental impact. Connected Farm also enables better collaboration between farmers and their trusted advisors, such as agronomists, on services such as soil and crop health analysis and nutrient management and variable rate application (VRA).
During the year we also continued to add to a set of industry leading agronomic services. We released the new RainWave® Contour Map precipitation monitoring solution that maps precise rainfall amounts within an entire field or farm. We also launched Connected Farm Field, a field data management tool for the farmer; and Connected Farm Advisor, a field data management tool for the farmer's trusted advisor. The two applications make it easier to collect and manage data and easily collaborate through Connected Farm. We extended our Connected Farm solution to include a new agronomic service, the Soil Information System, which provides farmers with in-depth 3-D soil data to support more informed decisions about crop production goals.
With the release of Trimble PurePixel Precision Vegetation Health Solution, we provide processing of multi-spectral crop images. The system delivers a color-coded visual representation of a field’s crop health or maturity level, enabling farmers and their trusted advisers to be more efficient in locating, identifying and solving crop production issues. In 2014 we added the Trimble UX5 unmanned aircraft system to our portfolio. When used for aerial imaging and mapping, the UX5 enables service providers to capture aerial images for scouting and monitoring crop health, and detecting pests, weeds and nitrogen deficiencies. In December we announced that the Federal Aviation Administration has granted an exemption that will allow us to conduct commercial operation of our UX5 solution in the U.S.
We also added to our agriculture product portfolio via acquisitions. In 2014 we acquired IRON Solutions, which provides market information, analytics-based intelligence and a cloud-based enterprise system to improve dealer and producer productivity, and C3 Consulting, a provider of unique soil information as well as decision recommendations to farmers' trusted advisors, such as agronomists, Trimble resellers or agricultural retail suppliers.
We use multiple distribution approaches to access the agricultural market, including independent dealers and direct selling to enterprise accounts. A significant portion of our sales are through CNH Global and affiliated dealer networks. Competitors in this market are vertically integrated farm equipment and implement companies such as John Deere and agricultural instrumentation companies such as Raven and Ag Junction. As we expand our business in agronomic services and data oriented applications, we expect to increasingly compete with major input suppliers such as Monsanto. We compete principally on the basis of robust performance, ease of use, price, interoperability, interconnectedness and the completeness of our solutions.
Geographic Information Systems. Our GIS product line provides trustworthy systems to collect authoritative field data and integrate that data into GIS databases. Our handheld data collection systems allow users to quickly log positions and descriptive information about their assets, ensure the integrity and accuracy of GIS information and ultimately, enable better decision-making. Through a combination of wireless technologies and software solutions, fieldwork results are seamlessly delivered to the back-office GIS, and mobile workers can also access GIS information remotely. This capability provides significant advantages to users including improved productivity, accuracy and access to information in the field.
Our 2014 launch of Trimble InSphere also supports the enhancement of our GIS offerings. InSphere integrates data from the GIS data collection products as well as survey data collection to enhance interoperability between the two major types of data that are relevant to GIS markets. We launched a number of hardware devices with enhanced functionality and GNSS accuracy for data collection and enhanced our software solutions to support greater workflow integration with other GIS systems. In 2014 we acquired WeoGeo, a provider of technology for managing spatial data and selling different data types using an online marketplace.
Primary markets for our GIS products and solutions include both governmental and commercial users. Distribution for GIS products is primarily through a network of independent dealers and business partners, supported by Trimble personnel. Competitors in this market are typically survey instrument companies utilizing GNSS technology such as Topcon and Leica. We compete principally on the basis of robust performance, ease of use, price, interoperability and interconnectedness.
Mobile Solutions
Our Mobile Solutions segment primarily consists of two businesses, Transportation and Logistics and Field Service Management.
Transportation and Logistics. In the transportation and logistics market, we offer a suite of solutions marketed under the Trimble, PeopleNet, GEOTrac, TMW and ALK Technologies brands. Together, this range of products provides a comprehensive fleet and transportation management, analytics, routing, mapping, and reporting solution to enable the transportation and logistics industry to achieve greater overall fleet performance while ensuring regulatory compliance. Our fleet productivity and enterprise software offerings are comprised primarily of the PeopleNet, TMW, Vusion, PC*Miler, CoPilot and FleetWorks mobile platforms. Our enterprise strategy focuses on sales to large enterprise accounts with more than 1,000 vehicles or routes. In addition to Trimble-hosted solutions, we also integrate our applications and services directly into the customer’s IT infrastructure.
The PeopleNet system includes solutions encompassing route management, safety and compliance, end-to-end vehicle management, and supply chain communications. PeopleNet's products are used by more than 1,500 transportation fleets in the US and Canada. GEOTrac’s telematics systems provide end-to-end solutions for oil & gas road mapping, vehicle monitoring, geofencing, messaging and alerting, driver productivity, distress notification, lone worker monitoring, reporting and maintenance monitoring. The CarCube/FleetWorks solution is tailored for transportation and logistics companies in Europe and Australia. TMW's transportation software platform serves as a central hub from which the core operations of transportation organizations are managed, data is stored and analyzed, and mission critical business processes are automated. Our software platform automates business processes spanning the entire surface transportation lifecycle, delivering visibility, control, and decision support for the intricate relationships and complex processes involved in the movement of freight. TMW's enterprise software currently integrates with PeopleNet's fleet productivity solutions, and jointly they serve more than 3,000 fleets around the world. The PC*Miler and CoPilot products provide a truck routing, mileage and mapping solution and a voice guided turn-by-turn navigation solution, respectively. In 2014, we made several key announcements in the transportation and logistics market. We entered into a strategic alliance with 3Gtms, Inc., a privately-held provider of transportation management systems. The alliance includes an equity investment in 3Gtms by Trimble and a commercial reseller agreement with TMW Systems. ALK Technologies released the latest version of PC MILER truck routing, mileage and mapping software. PC MILER includes new tools and enhanced functionality geared around the need for greater customization.
Field Services Management. Trimble’s Field Service Management offerings provide owners and operators of fleets of vehicles, such as service vehicles, with visibility into field and fleet operations so they can increase efficiency and productivity. The Field Service Management suite includes applications for fleet management, work management and scheduling, worker safety and mobility that improve the effectiveness of work, workers and assets in the field. This cloud-based portfolio allows Trimble to offer customers industry-specific, enterprise-level solutions for enhanced performance and ease of use. Our market strategy targets opportunities in specific vertical markets where we believe we can provide unique value to the end-user by tailoring our solutions. Major markets include telecommunications, utilities, mobile workers, construction logistics, forestry, public safety, and oil and gas.
In 2014, we introduced a new cloud-based platform for field service management called Trimble Horizon. Trimble Horizon offers customers an extensible platform allowing them to rely on Trimble as a single provider for all their mobile worker needs.
The Mobile Solutions segment generally sells directly to end-users. Sales cycles tend to be long due to field trials followed by an extensive decision-making process. Key competitors in this segment include Omnitracs, Fleetmatics, Teletrac, and McLeod, among others. We compete principally on the basis of interconnectedness, customer support and service, price, innovative product offerings, quality, and provision of a complete solution.
Advanced Devices
Advanced Devices includes the product lines from our Embedded Technologies, Timing, Applanix, Trimble Outdoors, Military and Advanced Systems (MAS), and ThingMagic businesses. With the exception of Trimble Outdoors and Applanix, these businesses share several common characteristics: they are hardware centric, generally market to OEMs, system integrators and service providers, and have products that can be utilized in a number of different end user markets and applications. The various operations that comprise this segment were aggregated on the basis that these operations, taken as a whole, do not exceed 10% of our total revenue, operating income or assets.
Within Embedded Technologies and Timing, we supply GNSS modules, licensing and complementary technologies, and GNSS-integrated sub-system solutions for applications requiring precise position, time or frequency. Embedded Technologies and Timing serve a broad range of vertical markets including telecommunications, automotive electronics, and commercial electronics. Sales are made directly to OEMs, system integrators, value-added resellers and service providers who incorporate our components into
a complete system-level solution. Competitors in this market include Microsemi and u-blox. We compete principally on the basis of product performance, price and quality.
Our MAS business supplies GPS receivers and embedded modules that use the military’s advanced GPS capabilities. The modules are principally used in aircraft navigation and timing applications. Military products are sold directly to either the U.S. government or defense contractors. Sales are also made to authorized foreign end-users. Competitors in this market include Rockwell Collins, L3 and Raytheon.
Our Trimble Outdoors business utilizes GPS-enabled smartphones, desktop mapping software, and printed map services to provide information for outdoor recreational and light professional activities. Trimble Outdoors products are used in hiking, hunting, fishing, and professional activities such as emergency search and rescue and natural resource management. Consumers purchase the Trimble Outdoors product from smartphone channels which include the Apple iTunes and Google Play stores, direct from Trimble Outdoors family of Web outlets, and through consumer reseller channels. Competitors in this market include Alltrails and Motion X. We compete principally on the basis of price, innovative products and ease of use.
Our Applanix business is a leading provider of advanced products and enabling solutions that maximize productivity through mobile mapping and positioning to professional markets worldwide. Applanix develops, manufactures, sells, and supports high-value, precision products that combine GNSS with inertial sensors for accurate measurement of position and attitude, flight management systems, and scalable mobile mapping solutions used in airborne, land, and marine applications. Sales are made by our direct sales force to end-users, systems integrators, and OEMs, and through regional agents. Competitors include OxTS, IGI and Novatel. We compete principally on the basis of product features, performance and domain knowledge.
Our ThingMagic business is a provider of Ultra High Frequency (UHF) Radio Frequency Identification (RFID) reader modules, finished/fixed-position RFID readers and design services. ThingMagic RFID readers support demanding high-volume applications deployed by some of the world’s largest industrial automation firms, manufacturers, healthcare organizations, retailers and consumer companies. ThingMagic consulting, design and development services assist customers with the integration of auto-identification and sensing technologies into everyday products and solutions. Sales of our ThingMagic products are made directly to OEMs, system integrators, value-added resellers and solution providers who incorporate our technology into point products or complete system-level solutions. Competitors include Impinj, Caen and NordicID. We compete principally on the basis of product performance and quality.
Patents, Licenses and Intellectual Property
We seek to establish and maintain our proprietary rights in our technology and products through the use of patents, copyrights, trademarks, and trade secret laws. We have a program to file applications for and obtain patents, copyrights, and trademarks in the United States and in selected foreign countries where we believe filing for such protection is appropriate. We hold approximately 1100 unique issued and enforceable patents, the majority of which cover GNSS based technologies and other applications such as optical and laser technology. We are not dependent on any one patent. We also own numerous trademarks and service marks that contribute to the identity and recognition of Trimble and its products and services globally. We prefer to own the intellectual property used in our products, either directly or through subsidiaries. From time to time we license technology from third parties.
Competition
Our markets are highly competitive and we expect that both direct and indirect competition will increase in the future. Within each of our markets, we encounter direct competition from other GNSS, software, optical and laser suppliers such as Hexagon and Topcon, and competition may intensify from various larger U.S. and non-U.S. competitors. Our hardware products are increasingly subject to competition from existing and new entrants from emerging markets such as China, which compete aggressively on price at the lower priced end of the market. Our integrated hardware and software products may also be subject to increasing competition from mass market devices such as smartphones and tablets combined with relatively inexpensive applications, which have not been heavily used for commercial applications in the past.
Many of our products and solutions are focused on specific industries. In each of these industries we face competition from companies providing point solutions or more traditional, less technology intensive products and services, which often have greater financial resources and more established and recognized brands in those industries. Competing in vertical markets with these more established industry participants requires that we successfully establish a market position and market new and sometimes unfamiliar technology and automated solutions to customers that have not previously used such products. We also increasingly offer enterprise level solutions designed to meet the specific needs of our target industries. In doing so, we face competition from larger and more well established providers of enterprise software and services with whom we have not previously competed. See also "Risk Factors - We face substantial competition in our markets which could decrease our revenue and growth rates or impair our operating results and financial condition."
Sales and Marketing
We tailor our distribution to the needs of our products and regional markets around the world. Most of our products are sold worldwide primarily through indirect channels, including distributors, dealers and authorized representatives. Occasionally we grant exclusive rights to market certain products within specific countries. These channels are supported by our regional sales offices throughout the world. We also utilize distribution alliances, OEM relationships, and joint ventures with other companies as a means to serve selected markets, as well as direct sales to end-users.
During fiscal 2014, sales to customers in the United States represented 48%, Europe represented 24%, Asia Pacific represented 14%, and other regions represented 14% of our total revenue.
Seasonality of Business
Construction purchases tend to occur in early spring, and U.S. governmental agencies tend to utilize funds available at the end of the government’s fiscal year for additional purchases at the end of our third fiscal quarter in September of each year. Our agricultural equipment business revenues have historically been the highest in the first quarter, followed by the second quarter, reflecting buying in anticipation of the spring planting season in the Northern hemisphere. However, overall as a company, as a result of diversification of our business across segments and the increased impact of subscription revenues, we may experience less seasonality in the future.
Backlog
In most of our markets, the time between order placement and shipment is short. Orders are generally placed by resellers and customers on an as-needed basis. In general, customers may cancel or reschedule orders without penalty. For these reasons, we do not believe that backlog is a meaningful indicator of future revenue or material to understanding our business.
Manufacturing
Manufacturing of many of our GNSS products is subcontracted to Flextronics International Limited in Mexico. We utilize Flextronics for Survey, Field Solutions and Mobile Solutions products. We utilize Benchmark Electronics Inc. in China for our Embedded Technologies and Timing products. We utilize Jabil Mexico for our Construction and Mobile Solutions products. Our contract manufacturing partners are responsible for significant material procurement, assembly and testing. We continue to manage product design through pilot production for the subcontracted products, and we are directly involved in qualifying suppliers and key components used in all our products. Our current contract with Flextronics continues in effect until either party gives the other ninety days written notice. We also utilize original design manufacturers for some of our products.
We manufacture our laser and optics-based products, as well as some of our GNSS products, at our plants in Dayton, Ohio; Danderyd, Sweden and Shanghai, China. Some of these products or portions of these products are also subcontracted to third parties for assembly.
Our design manufacturing and distribution sites in Dayton, Ohio; Sunnyvale, California; Danderyd, Sweden; Eersel, Netherlands and Shanghai, China are registered to ISO9001:2000, covering the design, production, distribution, and servicing of all our products.
Research and Development
We believe that our competitive position is maintained through the development and introduction of new products and services that incorporate improved features and functionality, better performance, smaller size and weight, lower cost, or some combination of these factors. We invest substantially in the development of new products. We also make significant investment in the positioning, communication and information technologies that underlie our products and will likely provide competitive advantages.
Our research and development expenditures, net of reimbursed amounts were $318.0 million for fiscal 2014, representing approximately 13% of revenue.
We expect to continue investing in research and development at a rate consistent with our past, with the goal of maintaining or improving our competitive position, and entering new markets.
Employees
At the end of fiscal 2014, we employed 8,217 employees, including 18% in manufacturing, 33% in engineering, 37% in sales and marketing, and 12% in general and administrative positions. Approximately 53% of employees are in locations outside the United States.
Some employees in Sweden and Finland are represented by unions. Some employees in Germany and France are represented by works councils. We also employ temporary and contract personnel that are not included in the above headcount numbers. We have not experienced work stoppages or similar labor actions.
Available Information
The Company’s annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and all amendments to those reports are available free of charge on the Company’s web site through investor.trimble.com, as soon as reasonably practicable after such material is electronically filed with or furnished to the Securities and Exchange Commission. Financial news and reports and related information about our company as well as non-GAAP to GAAP reconciliations can also be found on this web site. Information contained on our web site is not part of this annual report on Form 10-K.
In addition, you may request a copy of these filings (excluding exhibits) at no cost by writing or telephoning us at our principal executive offices at the following address or telephone number:
Trimble Navigation Limited
935 Stewart Drive, Sunnyvale, CA 94085
Attention: Investor Relations Telephone: 408-481-8000
Executive Officers
The names, ages and positions of the Company’s executive officers as of February 20, 2015 are as follows:
|
| | | | |
Name | | Age | | Position |
Steven W. Berglund | | 63 | | President and Chief Executive Officer |
François Delépine | | 52 | | Chief Financial Officer |
Bryn A. Fosburgh | | 52 | | Vice President |
Christopher W. Gibson | | 53 | | Vice President |
Mark A. Harrington | | 59 | | Vice President |
Jürgen D. Kliem | | 57 | | Vice President |
James A. Kirkland | | 55 | | Vice President and General Counsel |
Julie A. Shepard | | 57 | | Vice President, Finance |
James A. Veneziano | | 53 | | Vice President |
Steven W. Berglund—Steven Berglund has served as president and chief executive officer of Trimble since March 1999. Prior to joining Trimble, Mr. Berglund was president of Spectra Precision, a group within Spectra Physics AB. Mr. Berglund’s business experience includes a variety of senior leadership positions with Spectra Physics, and manufacturing and planning roles at Varian Associates. He began his career as a process engineer at Eastman Kodak. He attended the University of Oslo and the University of Minnesota where he received a B.S. in chemical engineering. Mr. Berglund received his M.B.A. from the University of Rochester. Mr. Berglund is a member of the board of directors of the Silicon Valley Leadership Group and of the board of trustees of World Educational Services. He is also a member of the construction sector board of the Association of Equipment Manufacturers. In December 2013, Mr. Berglund was appointed to the board of directors and compensation committee of Belden Inc., a global provider of end-to-end signal transmission solutions.
François Delépine—François Delépine joined Trimble as chief financial officer in January 2014. He is responsible for Trimble’s worldwide finance operations. Prior to joining Trimble, Mr. Delépine served as chief financial officer, global business units at VMware, Inc., a provider of business infrastructure virtualization solutions. From August 2010 until June 2013, he served as VMware’s vice president of finance. Between April 2009 and July 2010, Mr. Delépine served as vice president of finance of Palm, Inc., a smartphone technology company. Prior to that, he was vice president of financial planning and analysis at Google Inc.. Mr. Delépine has also held senior operating and financial roles at a variety of technology companies including Hyperion and Apple. Mr. Delépine holds a B.S. in Industrial Engineering from the Institut Catholique d'Arts et Métiers in Lille, France and an MBA from the Anderson School of Business at UCLA.
Bryn A. Fosburgh—Bryn Fosburgh currently serves as a sector vice president for Trimble's heavy and highway and building construction businesses, which include the Trimble Buildings Group, and the Caterpillar and Hilti-related joint ventures. From
2009 to 2010, Mr. Fosburgh served as vice president for Trimble's Construction Division, with responsibility for a number of corporate functions and geographical regions. From 2007 to 2009, Mr. Fosburgh was vice president for Trimble's Construction and Agriculture Divisions, and from 2005 to 2007, Mr. Fosburgh served as vice president and general manager of Trimble's Engineering and Construction Division. Mr. Fosburgh joined Trimble in 1994 and has held numerous roles, including vice president and general manager for Trimble's geomatics and engineering division, and division vice president of survey and infrastructure. Prior to Trimble, Mr. Fosburgh was a civil engineer and also held various positions for the U.S. Army Corps of Engineers and Defense Mapping Agency. Mr. Fosburgh received a B.S. in geology from the University of Wisconsin in Green Bay in 1985 and an M.S. from the school of civil engineering at Purdue University in 1989.
Christopher W. Gibson—Christopher Gibson currently serves as vice president for Trimble's Survey, Geospatial, GIS, Infrastructure, Rail, Land Administration and Environmental Solutions businesses. Mr. Gibson joined Trimble in 1998 as European finance and operations director. In 2009, he was appointed to serve as vice president responsible for Trimble’s Survey Division, and in December 2010, those responsibilities were expanded to include oversight of geographic regions and divisions, including Building Construction, Construction Tools, and the Hilti joint venture. From 2008 to 2009, Mr. Gibson served as the general manager for the Survey Division, and from 2005 to 2008, he was general manager for the Global Services Division. Prior to Trimble, Mr. Gibson’s business experience includes a number of financial management roles with Tandem Computers, and financial analyst roles with Unilever subsidiaries. Mr. Gibson received a BA in Business Studies in 1985 from Thames Polytechnic, now the University of Greenwich, and was admitted as a Fellow to the Chartered Institute of Management Accountants in 1994.
Mark A. Harrington—Mark Harrington has served as a vice president of Trimble since 2004, and currently serves as vice president for Trimble's Agriculture, Forestry, Water and Energy Utilities and Public Safety Divisions, with responsibility for several corporate functions and geographical regions. From 2007 to 2009, Mr. Harrington served as vice president for Trimble's Survey and Mapping and GIS Divisions, and from 2004 to 2007, he served as vice president of strategy and business development. Prior to Trimble, Mr. Harrington served as vice president of finance at Finisar Corporation, chief financial officer for Cielo Communications, Inc., and Vixel Corporation, vice president of finance for Spectra-Physics Lasers, Inc. and vice president of finance for Spectra-Physics Analytical, Inc. Mr. Harrington began his career at Varian Associates, Inc. Mr. Harrington received his B.S. in Business Administration from the University of Nebraska-Lincoln.
Jürgen D. Kliem—Jürgen Kliem currently serves as vice president for several businesses within the Advanced Devices segment, and is also responsible for various corporate functions, including key accounts and government funded projects. Mr. Kliem previously served as vice president of strategy and business development from 2008 until 2012. From 2002 to 2008, Mr. Kliem served as general manager of Trimble's Survey Division, and prior to that, Mr. Kliem was responsible for Trimble's Engineering and Construction Division in Europe. Mr. Kliem held various leadership roles at Spectra Precision, which was acquired by Trimble, and at Geotronics, a company acquired by Spectra Precision. Before joining Geotronics, Mr. Kliem worked in a privately-held surveying firm addressing cadastral, construction, plant and engineering projects. Mr. Kliem received a Diplom Ingenieur degree from the University of Essen, Germany in 1982.
James A. Kirkland—James Kirkland joined Trimble as vice president and general counsel in July 2008. Prior to joining Trimble, he served as general counsel and executive vice president, strategic development at Covad Communications. Mr. Kirkland also served as senior vice president of spectrum development and general counsel at Clearwire Technologies, Inc. Mr. Kirkland began his career in 1984 as an associate at Mintz Levin and in 1992 he was promoted to partner. Mr. Kirkland received his BA from Georgetown University in Washington, D.C. in 1981 and his J.D. from Harvard Law School in 1984.
Julie A. Shepard—Julie Shepard joined Trimble in December of 2006 as vice president of finance, and was appointed principal accounting officer in May 2007. Prior to joining Trimble, Ms. Shepard served as vice president of finance and corporate controller at Quantum Corporation. Ms. Shepard brings with her over 25 years of experience in a broad range of finance roles, with diverse experience ranging from early stage private equity backed technology companies to large multinational corporations. Ms. Shepard began her career at Price Waterhouse and is a Certified Public Accountant. She received a B.S in Accounting from California State University. She is a member of the AICPA, Financial Executive Institute and the California Society of CPAs.
James A. Veneziano—James Veneziano has served as a vice president of Trimble since 2009 and is currently responsible for Trimble's Mobile Solutions, Data Services and Hosting, Global Services and portions of the Advanced Devices segment. Mr. Veneziano joined Trimble in 1990 as a manufacturing engineer in the Company's Operations group. In 1993, he was appointed director of Operations. In 1998, Mr. Veneziano was appointed director of marketing for Agriculture and Mapping and GIS. From 2000 to 2005, Mr. Veneziano served as the general manager of Trimble's Agriculture business. From 2005 to 2009, he was the general manager of Trimble's Construction business. Prior to joining Trimble, Mr. Veneziano worked for Hewlett-Packard in a variety of manufacturing positions including development engineer and engineering supervisor as well as new product introduction manager. He received a B.S. in electrical engineering from Colorado State University in Fort Collins in 1984.
RISKS AND UNCERTAINTIES
You should carefully consider the following risk factors, in addition to the other information contained in this Form 10-K and in any other documents to which we refer you in this Form 10-K, before purchasing our securities. The risks and uncertainties described below are not the only ones we face.
Our annual and quarterly performance may fluctuate which could negatively impact our operations, financial results, and our stock price
Our operating results have fluctuated and can be expected to continue to fluctuate in the future on a quarterly and annual basis as a result of a number of factors, many of which are beyond our control. Results in any period could be affected by:
| |
• | changes in market demand, |
| |
• | competitive market conditions, |
| |
• | the timing of recognizing revenues, |
| |
• | fluctuations in foreign currency exchange rates, |
| |
• | the cost and availability of components, |
| |
• | the mix of our customer base and sales channels, |
| |
• | the mix of products sold, |
| |
• | pricing of products, and |
| |
• | global or regional economic developments. |
Seasonal variations in demand for our products may also affect our quarterly results. Construction purchases tend to occur in early spring, and U.S. governmental agencies tend to utilize funds available at the end of the government’s fiscal year for additional purchases at the end of our third fiscal quarter in September of each year. Our agricultural equipment business revenues have historically been the highest in the first quarter, followed by the second quarter, reflecting buying in anticipation of the spring planting season in the Northern hemisphere. If we do not accurately forecast seasonal demand we may be left with unsold inventory or have a shortage of inventory, which could negatively impact our financial results.
Due in part to the buying patterns of our customers, a significant portion of our quarterly revenue occurs from orders received and immediately shipped to customers in the last few weeks and days of each quarter, while our operating expense tends to remain fairly predictable. A majority of our sales force earns commissions on a quarterly basis which may cause concentrations of orders at the end of any fiscal quarter. It could harm our operating results if for any reason expected sales are deferred, orders are not received, or shipments are delayed a few days at the end of a quarter.
The price of our common stock could decline substantially in the event such occurrences result in our financial performance being below the expectations of public market analysts and investors, which are based on historical models that are not necessarily accurate representations of the future.
The volatility of our stock price could adversely affect an investment in our common stock
The market price of our common stock has been, and may continue to be, highly volatile. During fiscal 2014, our stock price ranged from $26.51 to $39.96. We believe that a variety of factors could cause the price of our common stock to fluctuate, perhaps substantially, including:
| |
• | announcements and rumors of developments related to our business or the industry in which we compete, |
| |
• | quarterly fluctuations in our actual or anticipated operating results and order levels, |
| |
• | general conditions in the worldwide economy, |
| |
• | acquisition announcements, |
| |
• | new products or product enhancements by us or our competitors, |
| |
• | developments in patents or other intellectual property rights and litigation, |
| |
• | developments in our relationships with our partners, customers and suppliers, and |
| |
• | significant acts of terrorism. |
In addition, the stock market in general and the markets for shares of “high-tech” companies in particular, have frequently experienced extreme price fluctuations which have often been unrelated to the operating performance of affected companies. Any such fluctuations in the future could adversely affect the market price of our common stock.
Global and regional economic conditions and the cyclicality of some of our key markets may negatively impact our businesses and our operating results
Our earnings and financial position are and will continue to be influenced by various macroeconomic factors-including increases or decreases in gross domestic product, the level of consumer and business confidence, changes in interest rates on consumer and business credit, fluctuations in foreign currency exchange rates, energy prices, and the cost of commodities such as corn-which exist in the various countries in which we operate. During 2014 we experienced a strengthening U.S. Dollar which had the impact of making some of our products and services more expensive than many of our local competitors.
In the recent past, uncertainties in the financial and credit markets have caused our customers to postpone purchases, and negative economic conditions may reduce future sales of, or demand for, our products and services. Negative economic conditions may depress the tax revenues of federal, state and local government entities, which are significant purchasers of our products. Many of our products are sold through dealer channels, and our dealers depend on the availability of credit to finance purchases of our products for their inventory. Sources of credit could disappear or the financial situation of our channel partners and customers could become such that they are no longer eligible for such financing. Negative economic conditions may result in increased collection times or greater write-offs, affecting our cash flow. Our suppliers may be impacted by economic pressures, which may adversely affect their ability to fulfill their obligations to us and therefore cause a disruption in our supply chain.
Financial conditions in several regions continue to place significant economic pressures on existing and potential customers, including our dealer channels. There is particular concern about economic conditions in Europe, which has experienced negative impacts from sovereign debt levels and government taxing and spending actions to address such issues, and pressures on the banking system in certain European Union countries. It is uncertain whether central bank or governmental measures will improve these conditions. Other governments may continue to implement measures which may slow the economic growth rate in those countries (e.g., higher interest rates, reduced bank lending and other anti-inflation measures). Growth rates in key emerging markets, including China, have slowed, which could affect demand for our products.
We are subject to the cyclicality of the agricultural and engineering and construction industries, which can cause sudden (and sometimes material) declines in demand, with negative effects on sales, inventory levels and product pricing. In general, demand in the engineering and construction industries for our products is highly correlated to the economic cycle and can be subject to even greater levels of volatility. The agricultural spending cycle is influenced by general economic conditions as well as weather, crop loads, commodity pricing, especially corn, the availability of credit and the strength of the U.S. Dollar. In 2014, the agricultural sector experienced a significant downturn which is continuing, which had a negative effect on the company’s overall growth rate.
If there is significant deterioration in the global economy, the economies of key countries or regions, or important customer markets, the demand for our products and services would likely decrease and our results of operations, financial position and cash flows could be materially and adversely affected. Changes in economic conditions also make it difficult to make financial forecasts, which could cause us to miss our financial guidance and adversely affect our stock price.
We are exposed to fluctuations in currency exchange rates which can adversely affect our operating results
Fluctuations in currencies impact our operating results, which are reported in U.S. Dollars. A significant portion of our business is conducted outside the U.S., and as such, we face exposure to movements in non-U.S. currency exchange rates. These exposures may change over time as business practices evolve and could have a material adverse impact on our financial results and cash flows. During 2014 our business was negatively impacted by the strong U.S. Dollar which increased the cost of some of our products and services relative to those of local competitors in some jurisdictions. If the U.S. Dollar remains strong or there is an increase in the exchange rate of the U.S. Dollar against other currencies, it could negatively impact foreign demand for our products or reduce the dollar value of local currency sales. Possible import, export, tariff, and other trade barriers, which could be imposed by other countries, might have a material adverse effect on the business.
Currently, we routinely hedge only those currency exposures associated with certain assets and liabilities denominated in non-functional currencies. The hedging activities undertaken by us are intended to offset the short term impact of currency fluctuations on certain non-functional currency assets and liabilities. Our attempts to hedge against these risks could be unsuccessful and expose us to losses.
Investing in and integrating new acquisitions could be costly, place a significant strain on our management systems and resources, and may fail to deliver the expected return on investment, which could negatively impact our operating results
We typically acquire a number of companies each year, and intend to continue to acquire other companies. Acquisitions of companies entail numerous risks, including:
| |
• | potential inability to successfully integrate acquired operations and products or to realize cost savings or other anticipated benefits from integration; |
| |
• | loss of key employees of acquired operations; |
| |
• | difficulty of assimilating geographically dispersed operations and personnel of the acquired companies; |
| |
• | potential disruption of our ongoing business; |
| |
• | unanticipated expense related to acquisitions; |
| |
• | unanticipated difficulties in conforming business practices, policies, procedures, internal controls, and financial records of acquisitions with our own business; |
| |
• | impairment of relationships with employees and customers of either an acquired company or our own business; |
| |
• | inability to accurately forecast performance of newly acquired businesses, resulting in unforeseen adverse effects on our operating results; |
| |
• | potential unknown liabilities, including liabilities resulting from unknown compliance or legal issues, associated with an acquired business; and |
| |
• | negative accounting impact to our results of operations because of purchase accounting treatment and the business practices of acquired companies. |
Any such effects from acquisitions could be costly and place a significant strain on our management systems and resources.
As a result of acquisitions, we have significant assets that include goodwill and other purchased intangibles. The testing of this goodwill and intangibles for impairment under established accounting guidelines requires significant use of judgment and assumptions. Changes in business conditions could require negative adjustments to the valuation of these assets resulting in write-offs which adversely affect our results. If we divest a business and the proceeds are less than the net book value at the time, we would be forced to write off the difference. In addition, losses incurred by a company in which we have an investment may have a direct impact on our financial statements or could result in our having to write-down the value of such investment.
Even if successfully negotiated and closed, acquisitions may not yield expected synergies, may not advance our business strategy as expected, may fall short of expected return-on-investment targets, or may not prove successful or effective for our business. Companies that we acquire may operate with different cost and margin structures, which could further cause fluctuations in our operating results and adversely affect our operating margins.
We may not be able to enter into or maintain important alliances and distribution relationships
We believe that in certain business opportunities our success will depend on our ability to form and maintain alliances with industry participants, such as Caterpillar, Nikon, Hilti, and CNH Global. Our failure to form and maintain such alliances, or the pre-emption of such alliances by actions of competitors, will adversely affect our ability to sell our products to customers. Our relationships with substantial industry participants such as Caterpillar and CNH are complex and multifaceted, and may be subject to change based upon the business needs and objectives of the parties. Since these strategic relationships contribute to significant ongoing business in certain of our important markets, changes in these relationships could adversely affect our sales and revenues.
We utilize dealer networks, including those affiliated with some of our strategic allies such as Caterpillar and CNH Global, to market, sell and service many of our products. Changes in our product mix, including increasing provision of software and bundled solutions tailored to the needs of specific vertical markets, impose new demands on our distribution channels and may require significant changes in the skills and expertise required to successfully distribute our products and services, or the creation of new distribution channels. Recruiting and retaining qualified channel partners and training them in the use and the selling of our technology and product offerings requires significant time and resources. In order to develop and expand our distribution channels, we must continue to expand and improve our processes and procedures that support our channel, including our investment in systems and training, and those processes and procedures may become increasingly complex and difficult to manage. The time and expense required for sales and marketing organizations of our channel partners to become familiar with our product offerings, including our new product developments, and newer types of offering such as software and services, may make it more difficult to introduce those products to end-users and delay end-user adoption, which could result in lower revenues.
Disruption of dealer coverage within specific geographic markets could cause difficulties in marketing, selling or servicing our products and have an adverse effect on our business, operating results or financial condition. Moreover, dealers who carry products that compete with our products may focus their inventory purchases and sales efforts on goods provided by competitors due to industry demand or profitability. Such inventory adjustments and sourcing decisions can adversely impact our sales, financial condition and results of operations.
Our internal and customer facing systems, and systems of third parties we rely upon, may be subject to disruption, delays or cybersecurity breaches that could adversely impact our customers and operations
A cybersecurity incident in our own systems or the systems of our third party providers may compromise the confidentiality, integrity, or availability of our own internal data, the availability of our products and websites designed to support our customers, or our customer data. Computer hackers, foreign governments or cyber terrorists may attempt to penetrate our network security and our website. Unauthorized access to our proprietary business information or customer data may be obtained through break-ins, sabotage, breach of our secure network by an unauthorized party, computer viruses, computer denial-of-service attacks, employee theft or misuse, breach of the security of the networks of our third party providers, or other misconduct. Because the techniques used by computer hackers who may attempt to penetrate and sabotage our network security or our website change frequently and may not be recognized until after they have been launched against a target, we may be unable to anticipate these techniques. It is also possible that unauthorized access to customer data may be obtained through inadequate use of security controls by customers. A cybersecurity incident affecting our systems may also result in theft of our intellectual property, proprietary data or trade secrets, which would compromise our competitive position.
The systems we rely upon also remain vulnerable to damage or interruption from a number of other factors, including access to the internet, the failure of our network or software systems, or significant variability in visitor traffic on our product websites, earthquakes, floods, fires, power loss, telecommunication failures, computer viruses, human error, and similar events or disruptions. Some of our systems are not fully redundant, and our disaster recovery planning is not sufficient for all eventualities. Our systems are also subject to intentional acts of vandalism. Despite any precautions we may take, the occurrence of a natural disaster, a decision by any of our third-party hosting providers to close a facility we use without adequate notice for financial or other reasons, or other unanticipated problems at our hosting facilities could cause system interruptions and delays, and result in loss of critical data and lengthy interruptions in our services.
We rely on our information systems and those of third parties for activities such as processing customer orders, delivery of products, hosting and providing services and support to our customers, billing and tracking our customers, hosting and managing our customer data, and otherwise running our business. Any disruptions or unexpected incompatibilities in our information systems and those of the third parties upon whom we rely could have a significant impact on our business.
An increasing portion of our revenue comes from software as a service solutions and other hosted services in which we store, retrieve, communicate and manage data which is critical to our customers’ business systems. Disruption of our systems which support these services and solutions could cause disruptions in our customers’ systems and in the businesses that rely on these systems. Any such disruptions could harm our reputation, create liabilities to our customers, hurt demand for our services and solutions, and negatively impact our revenues and profitability.
Our products are highly technical and may contain undetected errors, product defects, security vulnerabilities or software errors, which could result in damage to our reputation, lost revenue, diverted development resources and increased service costs, warranty claims, and litigation
Our products, including our software products, are highly technical and complex and, when deployed, may contain errors, defects or security vulnerabilities. We must develop our products quickly to keep pace with the rapidly changing market, and we have a history of frequently introducing new products. Products and services as sophisticated as ours could contain undetected errors or defects, especially when first introduced or when new models or versions are released. Such occurrences could result in damage to our reputation, lost revenue, diverted development resources, increased customer service and support costs, warranty claims, and litigation.
We warrant that our products will be free of defect for various periods of time, depending on the product. In addition, certain of our contracts include epidemic failure clauses. If invoked, these clauses may entitle the customer to return or obtain credits for products and inventory, or to cancel outstanding purchase orders even if the products themselves are not defective.
Errors, viruses or bugs may be present in software that we license from third parties and incorporate into our products or in third party software that our customers use in conjunction with our software. Our customers’ proprietary software and network firewall protections may corrupt data from our products and create difficulties in implementing our solutions. Changes to third party software that our customers use in conjunction with our software could also render our applications inoperable. Any errors, defects or security vulnerabilities in our products or any defects in, or compatibility issues with, any third party software or customers’ network environments discovered after commercial release could result in loss of revenues or delay in revenue recognition, loss of customers, theft of trade secrets, data or intellectual property and increased service and warranty cost, any of which could adversely affect our business, financial condition and results of operations.
Undiscovered vulnerabilities in our products alone or in combination with third party software could expose them to hackers or other unscrupulous third parties who develop and deploy viruses, and other malicious software programs that could attack our products. Actual or perceived security vulnerabilities in our products could harm our reputation and lead some customers to return products, to reduce or delay future purchases or use competitive products.
If we are unable to effectively manage our increasingly diverse and complex businesses and operations, our ability to generate growth and revenue from new or existing customers may be adversely affected
Because our operations are geographically diverse and increasingly complex, our personnel resources and infrastructure could become strained and our reputation in the market and our ability to successfully manage and grow our business may be adversely affected. The size, complexity and diverse nature of our business and the expansion of our product lines and customer base have placed increased demands on our management and operations, and further growth, if any, may place additional strains on our resources in the future. Our ability to effectively compete and to manage our planned future growth will depend on, among other things, the following:
| |
• | Maintaining continuity in our senior management and key personnel; |
| |
• | Increasing the productivity of our existing employees; |
| |
• | Attracting, retaining, training and motivating our employees, particularly our technical and management personnel; |
| |
• | Deploying our solutions using third-party information systems, which may require changes to our applications, documentation and operational processes; |
| |
• | Improving our operational, financial and management controls; and |
| |
• | Improving our information reporting systems and procedures. |
The company has increasingly diversified the nature of its businesses both organically and by acquisition. As a result, an increasing amount of our business involves business models which require managerial techniques and skill sets which are different from those required to manage our historical core businesses. We are increasingly selling products and solutions directly to large enterprise customers and other end users of our products. A direct sales model requires different skills and management processes and procedures from those we have generally used in our business in the past, and may create conflicts with our channel partners. An increasing portion of our business will be associated with professional services in order to customize our solutions for the needs of individual customers, which has not previously represented a significant portion of our business. If we are not successful in executing on these new models, our sales and revenue may suffer.
Changes in our software and subscription businesses may negatively affect our operating results
An increasing portion of our revenue is generated through software maintenance and subscription revenue. Our customers have no obligation to renew their agreements for our software maintenance or subscription services after the expiration of their initial contract period, which typically range from one to five years. Our customer acquisition and renewal rates may decline or fluctuate as a result of a number of factors, including overall economic conditions, the health of their businesses, competitive offerings and customer dissatisfaction with our services. If customers do not renew their contracts for our products, our maintenance and subscription revenue will decline and our financial results will suffer. Any reduction in the number of licenses that we sell, even if our customer acquisition rates do not change, will have a negative impact on our future maintenance revenue growth. Since its introduction, our software as a service delivery model has also contributed to subscription revenue. If any of our assumptions about expenses, revenue or revenue recognition principles from these initiatives proves incorrect, or our attempts to improve efficiency are not successful, our actual results may vary materially from those anticipated, and our financial results will be negatively impacted.
We continually re-evaluate our software licensing programs and subscription renewal programs, including specific license models, delivery methods, and terms and conditions. Changes to our licensing programs and subscription renewal programs, including the timing of the release of enhancements, upgrades, maintenance releases, the term of the contract, discounts, promotions and other factors, could impact the timing of the recognition of revenue for our products, related enhancements and services and could adversely affect our operating results and financial condition. We may implement different licensing models which require the Company to recognize licensing fees over a longer period. Over the last few years, we have increasingly offered additional products in a software as a service (SAAS) model. SAAS revenues are recognized ratably over the subscription period. Any significant increase in the percentage of our business generated from such a subscription model, could increase the amount of revenue to be recognized over time as opposed to upfront, which would delay revenue recognition and have a negative impact on our operating results in any quarterly period. Due to these complexities associated with revenue recognition, we may not be able to accurately forecast our non-deferred and deferred revenues, which could cause us to miss our earnings estimates or revenue projections and negatively impact our stock price.
We face substantial competition in our markets which could decrease our revenue and growth rates or impair our operating results and financial condition
Our markets are highly competitive and we expect that both direct and indirect competition will increase in the future. Our overall competitive position depends on a number of factors including the price, quality and performance of our products, the effectiveness of our distribution channel and direct sales force, the level of customer service, the development of new technology and our ability to participate in emerging markets. Within each of our markets, we encounter direct competition from other GNSS, software, optical and laser suppliers and competition may intensify from various larger U.S. and non-U.S. competitors and new market entrants, particularly from emerging markets such as China. Our products, which commonly use GNSS for basic location information, may be subject to competition from alternative location technologies such as simultaneous location and mapping
technology. As we sell an increasing amount of software and subscription services, we face competition from a group of large well established companies with whom we have not previously competed. Our integrated hardware and software products may be subject to increasing competition from mass market devices such as smartphones and tablets used in conjunction with relatively inexpensive applications, which have not been heavily used for commercial applications in the past. These developments may require us to rapidly adapt to technological and customer preference changes that we have not previously been exposed to, including those related to cloud computing, mobile devices and new computing platforms. Such competition has in the past resulted and in the future may result in price reductions, reduced margins or loss of market share, any of which could decrease our revenue and growth rates or impair our operating results and financial condition. We believe that our ability to compete successfully in the future against existing and additional competitors will depend largely on our ability to execute our strategy to provide products with significantly differentiated features compared to currently available products. We may not be able to implement this strategy successfully, and our products may not be competitive with other technologies or products that may be developed by our competitors, many of whom have significantly greater financial, technical, manufacturing, marketing, sales, and other resources than we do.
We are dependent on new products and services and if we are unable to successfully introduce them into the market, or to effectively compete with new, disruptive product alternatives, our customer base may decline or fail to grow as anticipated
Our future revenue stream depends to a large degree on our ability to bring new products and services to market on a timely basis. We must continue to make significant investments in research and development in order to continue to develop new products and services, enhance existing products and achieve market acceptance of such products and services. We may incur problems in the future in innovating and introducing new products and services. Our development stage products may not be successfully completed or, if developed, may not achieve significant customer acceptance. Development and manufacturing schedules for technology products are difficult to predict, and we might not achieve timely initial customer shipments of new products. The timely availability of these products in volume and their acceptance by customers are important to our future success. If we are unable to introduce new products and services, if other companies develop competing technology products and services, or if we do not develop compelling new products and services, our number of customers may not grow as anticipated, or may decline, which could harm our operating results. Many of our offerings are increasingly focused on software and subscription services. The software industry is characterized by rapidly changing customer preferences which require us to address multiple delivery platforms, new mobile devices and cloud computing. Life cycles of software products can be short and this can exacerbate the risks associated with developing new products. The introduction of third-party solutions embodying new, disruptive technologies and the emergence of new industry standards could make our existing and future software solutions and other products obsolete or non-competitive. If we are not able to develop software and other solutions that address the increasingly sophisticated needs of our customers, or if we are unable to adapt to new technologies or new industry standards that impact our markets, our ability to retain or increase market share and revenues could be materially adversely affected.
Some of our products rely on third party technologies including open source software, so if integration or incompatibility issues arise with these technologies or these technologies become unavailable, our product and services development may be delayed, our reputation could be harmed and our business could be adversely affected
We license software, technologies and intellectual property underlying some of our software from third parties. The third party licenses we rely upon may not continue to be available to us on commercially reasonable terms, or at all, and the software and technologies may not be appropriately supported, maintained or enhanced by the licensors, resulting in development delays. Some software licenses are subject to annual renewals at the discretion of the licensors. In many cases, if we were to breach a provision of these license agreements, the licensor could terminate the agreement immediately. The loss of licenses to, or inability to support, maintain and enhance, any such third party software or technology could result in increased costs, or delays in software releases or updates, until such issues have been resolved. This could have a material adverse effect on our business, financial condition, results of operations, cash flows and future prospects.
We also incorporate open source software into our products. Although we monitor our use of open source, the terms of many open source licenses have not been interpreted by U.S. courts, and there is a risk that such licenses could be construed in a manner that could impose unanticipated conditions or restrictions on our ability to market or sell our products or to develop new products. In such event, we could be required to seek licenses from third-parties in order to continue offering our products, to disclose and offer royalty-free licenses in connection with our own source code, to re-engineer our products or to discontinue the sale of our products in the event re-engineering cannot be accomplished on a timely basis, any of which could adversely affect our business.
We are dependent on proprietary technology, which could result in litigation that could divert significant valuable resources
Our future success and competitive position is dependent upon our proprietary technology, and we rely on patent, trade secret, trademark, and copyright law to protect our intellectual property. The patents owned or licensed by us may be invalidated, circumvented, infringed and challenged. The rights granted under these patents may not provide competitive advantages to us. Any of our pending or future patent applications may not be issued within the scope of the claims sought by us, if at all.
Despite our efforts to protect our intellectual property rights, unauthorized parties may attempt to copy or otherwise obtain our software or develop software with the same functionality or to obtain and use information that we regard as proprietary. Others may develop technologies that are similar or superior to our technology, duplicate our technology or design around the patents owned by us. In addition, effective copyright, patent and trade secret protection may be unavailable, limited or not applied for in certain countries. The steps taken by us to protect our technology might not prevent the misappropriation of such technology.
The value of our products relies substantially on our technical innovation in fields in which there are many current patent filings. Third-parties may claim that we or customers indemnified by us are infringing upon their intellectual property rights. For example, individuals and groups may purchase intellectual property assets for the purpose of asserting claims of infringement and attempting to extract settlements from us or our customers. The number of these claims has increased in recent periods and may continue to increase in the future. As new patents are issued or are brought to our attention by the holders of such patents, it may be necessary for us to withdraw products from the market, secure a license from such patent holders, or redesign our products. In addition, the legal costs and engineering time required to safeguard intellectual property or to defend against litigation could become a significant expense of operations. Any such litigation could require us to incur substantial costs and divert significant valuable resources, including the efforts of our technical and management personnel, which harm our results of operations and financial condition.
Our global operations expose us to risks and challenges associated with conducting business internationally, and our results of operations may be adversely affected by our efforts to comply with U.S. laws which apply to international operations, such as the Foreign Corrupt Practices Act (FCPA) and US export control laws, as well as the laws of other countries
We operate on a global basis with offices or activities in Europe, Africa, Asia, South America, Australasia and North America. We face risks inherent in conducting business internationally, including compliance with international and U.S. laws and regulations that apply to our international operations. These laws and regulations include data privacy requirements, labor relations laws, tax laws, anti-competition regulations, import and trade restrictions, export control laws, and laws which prohibit corrupt payments to governmental officials or certain payments or remunerations to customers. Many of our products are subject to U.S. export law restrictions that limit the destinations and types of customers to which our products may be sold, or require an export license in connection with sales outside the United States. Given the high level of complexity of these laws, there is a risk that some provisions may be inadvertently or intentionally breached, for example through fraudulent or negligent behavior of individual employees, our failure to comply with certain formal documentation requirements or otherwise. Also, we may be held liable for actions taken by our local dealers and partners. Violations of these laws and regulations could result in fines, criminal sanctions against us, our officers or our employees, and prohibitions on the conduct of our business. Any such violations could include prohibitions on our ability to offer our products in one or more countries and could materially damage our reputation, our brand, our international expansion efforts, our ability to attract and retain employees, our business and our operating results.
In addition, we operate in many parts of the world that have experienced significant governmental corruption to some degree and, in certain circumstances, strict compliance with anti-bribery laws may conflict with local customs and practices. We may be subject to competitive disadvantages to the extent that our competitors are able to secure business, licenses or other preferential treatment by making payments to government officials and others in positions of influence or through other methods that U.S. law and regulations prohibit us from using. Our success depends, in part, on our ability to anticipate these risks and manage these difficulties.
In addition to the foregoing, engaging in international business inherently involves a number of other difficulties and risks, including:
| |
• | longer payment cycles and difficulties in enforcing agreements and collecting receivables through certain foreign legal systems; |
| |
• | political and economic instability; |
| |
• | potentially adverse tax consequences, tariffs, customs charges, bureaucratic requirements and other trade barriers; |
| |
• | difficulties and costs of staffing and managing foreign operations; |
| |
• | differing local customer product preferences and requirements than our U.S. markets; |
| |
• | difficulties protecting or procuring intellectual property rights; |
| |
• | fluctuations in foreign currency exchange rates; and |
| |
• | export duties, tariffs or trade restrictions. |
These factors or any combination of these factors may adversely affect our revenue or our overall financial performance.
We are dependent on a specific manufacturer and assembler for many of our products and on other manufacturers, and specific suppliers of critical parts for our products
We are substantially dependent upon Flextronics International Limited as our preferred manufacturing partner for many of our GNSS products. Under the agreement, we provide to Flextronics a twelve-month product forecast and place purchase orders with
Flextronics at least thirty calendar days in advance of the scheduled delivery of products to our customers, depending on production lead time. Although purchase orders placed with Flextronics are cancelable, the terms of the agreement would require us to purchase from Flextronics all inventory not returnable or usable by other Flextronics customers. Accordingly, if we inaccurately forecast demand for our products, we may be unable to obtain adequate manufacturing capacity from Flextronics to meet customers’ delivery requirements or we may accumulate excess inventories, if such inventories are not usable by other Flextronics customers. Our current contract with Flextronics continues in effect until either party gives the other ninety days written notice.
We rely on specific suppliers for a number of our critical components and on other contract manufacturers, including Benchmark Electronics and Jabil, for the manufacture, test and assembly of certain products and components. We have experienced shortages of components in the past. Our current reliance on specific or a limited group of suppliers and contract manufacturers involves risks, including a potential inability to obtain an adequate supply of required components, reduced control over pricing and delivery schedules, discontinuation of certain components, and economic conditions which may adversely impact the viability of our suppliers and contract manufacturers. This situation may be exacerbated during any period of economic recovery or a competitive environment. Any inability to obtain adequate deliveries or any other circumstance that would require us to seek alternative sources of supply or to manufacture, assemble and test such components internally could significantly delay our ability to ship our products, which could damage relationships with current and prospective customers and could harm our reputation and brand as well as our operating results.
We are dependent on the availability and unimpaired use of allocated bands within the radio frequency spectrum and our products may be subject to harmful interference from new or modified spectrum uses
Our GNSS technology is dependent on the use of satellite signals and on terrestrial communication bands. International allocations of radio frequency are made by the International Telecommunications Union (ITU), a specialized technical agency of the United Nations. These allocations are further governed by radio regulations that have treaty status and which may be subject to modification every two to three years by the World Radio Communication Conference. Each country also has regulatory authority over how each band is used in the country. In the United States, the Federal Communications Commission (FCC) and the National Telecommunications and Information Administration share responsibility for radio frequency allocations and spectrum usage regulations.
Any ITU or local reallocation of radio frequency bands, including frequency band segmentation and sharing of spectrum, or other modifications of the permitted uses of relevant frequency bands, may materially and adversely affect the utility and reliability of our products and have significant negative impacts on our customers, both of which could reduce demand for our products. For example, the FCC has been considering proposals to repurpose spectrum adjacent to the GPS bands for terrestrial broadband wireless operations throughout the United States. If the FCC were to permit implementation of such proposals, or similar proposals, terrestrial broadband wireless operations could create harmful interference to GPS receivers within range of such operations and impose costs to retrofit or replace affected receivers. Similarly, other countries have considered proposals for use of frequencies used by our products as well as adjacent bands that could cause harmful interference to our products.
Many of our products use other radio frequency bands, such as the public land mobile radio bands, together with the GNSS signal, to provide enhanced GNSS capabilities, such as real-time kinematics precision. The continuing availability of these non-GNSS radio frequencies is essential to provide enhanced GNSS products to our precision survey, agriculture, and construction machine controls markets. In addition, transmissions and emissions from other services and equipment operating in adjacent frequency bands or in-band may impair the utility and reliability of our products. Any regulatory changes in spectrum allocation or in allowable operating conditions could have a material adverse effect on our business, results of operations, and financial condition.
Many of our products rely on GNSS technology, GPS and other satellite systems, which may become degraded or inoperable and result in lost revenue
GNSS technology, GPS satellites and their ground support systems are complex electronic systems subject to electronic and mechanical failures and possible intentional disruption. Many of the GPS satellites currently in orbit were originally designed to have lives of 7.5 years and are subject to damage by the hostile space environment in which they operate. However, of the current deployment of 30 operational satellites in orbit, five have been in operation for more than 15 years, and over half have been in use for more than 7.5 years. Repair of damaged or malfunctioning satellites is currently not economically feasible. If a significant number of satellites were to become inoperable, there could be a substantial delay before they are replaced with new satellites. A reduction in the number of operating satellites below the 24-satellite standard established for GPS may impair the utility of the GPS system and the growth of current and additional market opportunities. In addition, software updates to GPS satellites and ground control segments can cause problems, and we depend on public access to open technical specifications in advance of such updates to mitigate these problems.
As the principal GNSS currently in operation, we are dependent on continued operation of GPS. The GPS constellation is operated by the U. S. Government, which is committed to maintenance and improvement of GPS. If supporting policies were to change, or if user fees were imposed, it could have a material adverse effect on our business, results of operations, and financial condition.
Many of our products also use signals from systems that augment GPS, such as the Wide Area Augmentation System and National Differential GPS System, and satellites transmitting signal corrections data on mobile satellite services frequencies utilized by our RTX corrections services. Some of these augmentation systems are operated by the U.S. government and rely on continued funding and maintenance of these systems. Any curtailment of the operating capability of these systems or limitations on access to, or use of the signals, or discontinuance of service could result in degradation of our services or product performance, with an adverse effect on our business.
Many of our products use satellite signals from the Russian GLONASS System. Other countries, including China and India, are in the process of creating their own GNSS systems, and we either have developed or will develop products which use GNSS signals from these systems. The European community is developing an independent radio navigation satellite system, known as Galileo. National or European authorities may provide preferential access to signals to companies associated with their markets, including our competitors, which could harm our competitive position. If we are unable to develop timely and competitive commercial products using these systems, or obtain timely and equal access to service signals, this could result in lost revenue. These authorities may also adopt protectionist measures favoring national companies who make use of their GNSS systems, to the detriment of Trimble products using the US GPS system, which would harm our business.
We are subject to the impact of governmental and other similar certifications processes and regulations which could adversely affect our products and our business
We market certain products that are subject to governmental and similar certifications before they can be sold. For example, CE certification for radiated emissions is required for most GNSS receiver and data communications products sold in the European community. In the future, U.S. governmental authorities may propose GPS receiver testing and certification for compliance with published GPS signal interface or other specifications. An inability to obtain any such certifications in a timely manner could have an adverse effect on our operating results. Governmental authorities may also propose other forms of GPS receiver performance standards, which may limit design alternatives, hamper product innovation or impose additional costs. Some of our products that use integrated radio communication technology require product type certification and some products require an end-user to obtain licensing from the FCC for frequency-band usage. These are secondary licenses that are subject to certain restrictions. An inability or delay in obtaining such certifications or changes to the rules by the FCC could adversely affect our ability to bring our products to market which could harm our customer relationships and therefore, our operating results. Any failure to obtain the requisite certifications could also harm our operating results.
We have claims and lawsuits against us that may result in adverse outcomes
We are subject to a variety of claims and lawsuits. Adverse outcomes in some or all of these claims may result in significant monetary damages or injunctive relief that could adversely affect our ability to conduct our business. Litigation and other claims are subject to inherent uncertainties and the outcomes can be difficult to predict. Management may not adequately reserve for a contingent liability, or may suffer unforeseen liabilities, which could then impact the results of a financial period. A material adverse impact on our consolidated financial statements could occur for the period in which the effect of an unfavorable final outcome becomes probable and reasonably estimable which, if not expected, could harm our results of operations and financial condition.
Our reported financial results may be adversely affected by changes in accounting principles applicable to us
Generally accepted accounting principles in the U.S. are subject to interpretation by the Financial Accounting Standards Board, or FASB, the SEC, and other bodies formed to promulgate and interpret appropriate accounting principles. For example, in May 2014, the FASB issued ASU No. 2014-09, Revenue from Contracts with Customers, which supersedes nearly all existing revenue recognition guidance under U.S. GAAP. This standard establishes a principle for recognizing revenue upon the transfer of promised goods or services to customers, in an amount that reflects the expected consideration received in exchange for those goods or services. The standard also provides guidance on the recognition of costs related to obtaining and fulfilling customer contracts. ASU 2014-09 is effective for fiscal 2017, including interim periods within that reporting period. Early adoption is not permitted. We are currently in the process of assessing the adoption methodology, which allows the amendment to be applied retrospectively to each prior period presented, or with the cumulative effect recognized as of the date of initial application. We are also evaluating the impact of the adoption of ASU No. 2014-09 on our consolidated financial statements and have not determined whether the effect will be material. Adoption of this standard, along with any other changes in accounting principles or interpretations could have a significant effect on our reported financial results and could affect the reporting of transactions completed before the announcement of a change. Any difficulties in the implementation of new or changed accounting standards could cause us to fail to meet our financial reporting obligations. Changes in applicable accounting standards could have a significant effect on our
reported financial results. If our estimates relating to our critical accounting policies are based on assumptions or judgments that change or prove to be incorrect, our operating results could fall below expectations of securities analysts and investors, resulting in a decline in our stock price.
Our debt could adversely affect our cash flow and prevent us from fulfilling our financial obligations
On November 24, 2014, we issued Senior Notes (Notes) due December 1, 2024 in an aggregate principal amount of $400.0 million. The Notes accrue interest at a rate of 4.75% per annum, payable semiannually in arrears on December 1 and June 1 of each year, beginning on June 1, 2015. When the Notes mature, we will have to expend significant resources to repay these Notes or seek to refinance them. If we decide to refinance the Notes, we may be required to do so on different or less favorable terms or we may be unable to refinance the Notes at all, both of which may adversely affect our financial condition.
On November 24, 2014, we entered into a new five-year credit agreement with a group of lenders (the 2014 Credit Facility). The 2014 Credit Facility provides for an unsecured revolving loan facility of $1.0 billion and a letter of credit sub-facility of up to $50.0 million. Subject to the terms of the 2014 Credit Facility, the revolving loan facility may be increased and term loan facilities may be established in an amount of up to $500.0 million. Upon entering into the 2014 Credit Facility, we borrowed $307.0 million under this revolving loan facility. We also have two $75 million revolving credit facilities which are uncommitted and may be called by the lenders with very little notice (the Uncommitted Facilities). At the end of fiscal 2014, our total debt was comprised primarily of Notes of $400.0 million, a revolving loan balance of $277.0 million under the 2014 Credit Facility and a revolving credit line balance of $57.0 million under the Uncommitted Facilities. Our outstanding indebtedness could have important consequences, such as:
| |
• | requiring us to dedicate a portion of our cash flow from operations and other capital resources to debt service, thereby reducing our ability to fund working capital, capital expenditures, general corporate purposes, and other cash requirements, particularly if the ratings assigned to our debt securities by rating organizations were revised downward, |
| |
• | increasing our vulnerability to adverse economic and industry conditions as compared to our competitors, |
| |
• | reducing our ability to make investments and acquisitions which support the growth of the company, |
| |
• | limiting our flexibility in planning for, or reacting to, changes and opportunities in, our industry, which may place us at a competitive disadvantage, and |
| |
• | limiting our ability to incur additional debt on acceptable terms, if at all. |
There are various financial covenants and other restrictions in our debt instruments. If we fail to comply with any of these requirements, the related indebtedness (and other unrelated indebtedness) could become due and payable prior to its stated maturity, and we may not be able to repay the indebtedness that becomes due. A default under our debt instruments may also significantly affect our ability to obtain additional or alternative financing.
Our ability to make scheduled payments or to refinance our obligations with respect to indebtedness will depend on our operating and financial performance, which in turn, is subject to prevailing economic conditions and to financial, business and other factors beyond our control.
Changes in our effective tax rate may reduce our net income in future periods
As a global company, we are subject to income and other taxes in the United States and numerous foreign jurisdictions. Significant judgment is required to determine and estimate worldwide tax liabilities. Our effective tax rate is largely based on the geographic mix of earnings, statutory rates, inter-company transfer pricing, and enacted tax laws. A number of factors may increase our future effective tax rates, including:
| |
• | the jurisdictions in which profits are determined to be earned and taxed, |
| |
• | the resolution of issues arising from tax audits with US and foreign tax authorities, |
| |
• | changes in the intercompany transfer pricing methodology |
| |
• | changes in the valuation of our deferred tax assets and liabilities, |
| |
• | increases in expense not deductible for tax purposes, including transaction costs and impairments of goodwill in connection with acquisitions, |
| |
• | changes in the realizability of available tax credits, |
| |
• | changes in share-based compensation, |
| |
• | changes in tax laws or the interpretation of such tax laws, and changes in generally accepted accounting principles, and |
| |
• | the repatriation of non-U.S. earnings for which we have not previously provided for U.S. taxes. |
We are currently in various stages of multiple year examinations by federal, state, and foreign taxing authorities, including a review of our 2010 and 2011 tax years by the U.S. Internal Revenue Service, or IRS. We regularly assess the likely outcomes of these audits in order to determine the appropriateness of our tax provision. If the IRS or the taxing authorities of any other jurisdiction were to successfully challenge a material tax position, we could become subject to higher taxes and our earnings would be adversely affected.
Our business is subject to disruptions and uncertainties caused by war, terrorism, or civil unrest
Acts of war, acts of terrorism or other circumstances of civil unrest, especially any directed at the GNSS signals or systems, could have a material adverse impact on our business, operating results, and financial condition. The threat of terrorism and war and heightened security and military response to this threat, or any future acts of terrorism, may invoke a redeployment of the satellites used in GNSS or interruptions of the system. Civil unrest, local conflict, or other political instability may adversely impact regional economies, cause work stoppages and limitations on foreign business transactions. In 2014, political instability and conflict in Ukraine led to reduced sales in the regions and restrictions on sales to parts of this region. To the extent that such interruptions result in delays or cancellations of orders, disruption of the manufacture or shipment of our products, or reduced demand for our products it could have a material adverse effect on our business, results of operations, and financial condition.
We are subject to the SEC's new rules regarding the use and disclosure of conflict minerals, which we expect will increase our operating and compliance costs and could potentially harm our reputation, causing a decline in our stock price
The SEC adopted its final rule implementing Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act concerning conflict minerals during August 2012. The goal of the rule is to cut direct and indirect funding of groups engaged in armed conflict and human rights abuses. We are committed to compliance with the SEC's Conflict Minerals Rule and support its intended objective. This new rule requires us to: (1) determine whether conflict minerals (tin, tantalum, tungsten, gold or similar derivatives) are used in our products and, if so, determine if the minerals originated from the Democratic Republic of Congo (DRC) or its immediately adjoining countries; and (2), if so, conduct due diligence regarding the source and chain of custody of these conflict minerals to determine whether the conflict minerals financed or benefitted armed groups. The rule required us to submit forms and reports to the SEC by May 31, 2014 and annually thereafter that disclose our determinations and due diligence measures.
Trimble does not directly purchase any conflicts minerals. Tracing these materials back to their country of origin is a complex task that may require us to, among other things, survey suppliers in our supply chain to understand what programs they have in place for tracing the source of minerals supplied to us or used in products supplied to us and to ensure that reasonable due diligence has been performed. Presently, we have not determined how many or if any of our supply chain partners use conflict minerals. In addition to the increased administrative expense required to comply with the new requirements that apply to us, we may face a limited pool of suppliers who can provide us “conflict-free” components, parts and manufactured products, and we may not be able to obtain conflict-free products or supplies in sufficient quantities or at competitive prices for our operations, and may be required to disclose that our products are not “conflict free.” This could adversely affect the Company’s reputation and may harm its relationships with business partners and customers, and our stock price could suffer as a result.
| |
Item 1B. | Unresolved Staff Comments |
None
The following table sets forth the significant real property that we own or lease as of January 2, 2015:
|
| | |
Location | Segment(s) served | Size in Sq. Feet |
Sunnyvale, California | All | 160,000 |
Huber Heights (Dayton), Ohio | Engineering & Construction | 310,000 |
| Field Solutions | |
Westminster, Colorado | Engineering & Construction Field Solutions | 125,000 |
Corvallis, Oregon | Engineering & Construction | 40,000 |
Richmond Hill, Canada | Advanced Devices | 50,200 |
Danderyd, Sweden | Engineering & Construction | 93,900 |
Christchurch, New Zealand | Engineering & Construction Mobile Solutions Field Solutions | 60,000 |
Milpitas, California | Mobile Solutions | 53,000 |
Espoo, Finland | Engineering & Construction Field Solutions | 65,678 |
Minnetonka, Minnesota | Mobile Solutions | 50,731 |
Mayfield Heights, Ohio | Mobile Solutions | 57,000 |
Chennai, India | Engineering & Construction Mobile Solutions | 67,288 |
In addition, we lease a number of smaller offices around the world primarily for sales, manufacturing and other functions. For financial information regarding obligations under leases, see Note 9 of the Notes to the Consolidated Financial Statements.
We believe that our facilities are adequate to support current and near term operations.
On August 9, 2013, Harbinger Capital Partners, LLC and additional plaintiffs (“Harbinger Plaintiffs”) filed a lawsuit against Deere & Co., Garmin International, Inc., the Company and two other defendants in the U.S. District Court in Manhattan in connection with the Harbinger Plaintiffs’ investment in LightSquared. The Harbinger Plaintiffs alleged, among other things, fraud and negligent misrepresentation, claiming that the defendants were aware of material facts that caused the Federal Communications Commission to take adverse action against LightSquared and affirmatively misrepresented and failed to disclose those facts prior to the Harbinger Plaintiffs’ investment in LightSquared. The Harbinger Plaintiffs sought $1.9 billion in damages from the defendants. On November 1, 2013, debtor LightSquared, Inc. and two related parties (“LightSquared Plaintiffs”) filed suit against the same defendants in the U.S. Bankruptcy Court in Manhattan. The LightSquared Plaintiffs asserted claims similar to those made by the Harbinger Plaintiffs, as well as additional claims, including breach of contract and tortious interference, and alleged that LightSquared invested billions of dollars in reliance on the promises and representations of defendants. On January 31, 2014, the U.S. District Court granted defendants’ motion to withdraw the LightSquared action from the U.S. Bankruptcy Court to the U.S. District Court. On February 5, 2015, the U.S. District Court dismissed all claims brought by the Harbinger Plaintiffs and the majority of those brought by the LightSquared Plaintiffs, including those for breach of contract, promissory estoppel, quantum merit, and tortious interference, but allowed the LightSquared Plaintiffs' claims of negligent representation and constructive fraud to proceed to discovery. On February 11, 2015, the Harbinger Plaintiffs filed a notice of appeal of the District Court’s dismissal of their claims. Although an unfavorable outcome of these litigation matters may have a material adverse effect on our operating results, liquidity, or financial position, we believe the claims in these lawsuits are without merit and intend to vigorously contest these lawsuits.
On September 2, 2011, Recreational Data Services, Inc. filed an action against us alleging misrepresentation and breach of contract arising from an unsuccessful business venture of the plaintiff, Recreational Data Services, Inc. We believed this suit lacked any basis in law or fact and attempted to have the case dismissed on legal grounds prior to trial. These efforts were not successful and the case was tried in front of a jury in Alaska beginning on September 9, 2014. On September 26, 2014, the jury returned a verdict in favor of the plaintiff and awarded the plaintiff damages of $51.3 million. On January 29, 2015, the court granted our Motion for Judgment Notwithstanding the Verdict, effectively vacating the jury’s verdict and ordering that plaintiff take nothing on its claims. We have submitted a proposed judgment to reflect this order, and expect that the court will sign and enter that judgment. In light of this order and anticipated judgment, we have reversed the expense and liability previously accrued as a current liability
under General and Administrative expense in our third quarter of fiscal 2014 following the jury verdict. Once judgment in our favor is entered, the plaintiff has the right to appeal the judgment.
From time to time, we are also involved in litigation arising out of the ordinary course of our business. There are no other material legal proceedings, other than ordinary routine litigation incidental to the business, to which we or any of our subsidiaries is a party or of which any of our or our subsidiaries' property is subject.
| |
Item 4. | Mine Safety Disclosures |
None.
PART II
| |
Item 5. | Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities |
Our common stock is traded on the NASDAQ under the symbol “TRMB.” The table below sets forth, during the periods indicated, the high and low per share sale prices for our common stock as reported on the NASDAQ.
|
| | | | | | | | | | | | | | | |
| 2014 | | 2013 |
| Sales Price | | Sales Price |
Quarter Ended | High | | Low | | High | | Low |
First quarter | $ | 39.96 |
| | $ | 30.78 |
| | $ | 32.03 |
| | $ | 28.37 |
|
Second quarter | 39.66 |
| | 34.23 |
| | 30.19 |
| | 24.66 |
|
Third quarter | 34.20 |
| | 29.40 |
| | 30.01 |
| | 24.90 |
|
Fourth quarter | 30.93 |
| | 26.51 |
| | 35.01 |
| | 27.97 |
|
Stock Repurchase Program
In August 2014, our Board of Directors approved a stock repurchase program (“2014 Stock Repurchase Program”), authorizing us to repurchase up to $300.0 million of Trimble’s common stock, replacing a stock repurchase program which has been in place since 2011. During fiscal 2014, under the provisions of both the 2014 and 2011 Stock Repurchase Programs, we repurchased approximately 3,235,000 shares of common stock in open market purchases, at an average price of $30.22 per share, for a total of $97.8 million. No shares of common stock were repurchased during fiscal 2013 and 2012. The purchase price was reflected as a decrease to common stock based on the average book value per share for all outstanding shares calculated at the time of each individual repurchase transaction. The excess of the purchase price over this average for each repurchase was charged to retained earnings. As a result, retained earnings was reduced by $83.0 million in fiscal 2014. Common stock repurchases under the program were recorded based upon the trade date for accounting purposes. All common shares repurchased under this program have been retired. As the end of fiscal 2014, the 2014 Stock Repurchase Program had remaining authorized funds of $250.0 million. Under the share repurchase program, the Company may repurchase shares from time to time in open market transactions, privately negotiated transactions, accelerated share buyback programs, tender offers, or by other means. The timing and amount of repurchase transactions will be determined by the Company’s management based on its evaluation of market conditions, share price, legal requirements and other factors. The program may be suspended, modified or discontinued at any time without prior notice.
The following table provides information relating to our common stock repurchase activity during the fourth quarter of 2014:
|
| | | | | | | | | | | | | |
| Total Number of Shares Purchased | | Average Price Paid per Share | | Total Number of Shares Purchased as Part of Publicly Announced Program | | Dollar Value of Shares that May Yet Be Purchased Under the Program |
October 4, 2014 - November 7, 2014 | 1,152,007 |
| | $ | 28.45 |
| | 1,152,007 |
| | $ | 250,000,013 |
|
November 8, 2014 - December 5, 2014 | — |
| | — |
| | — |
| | 250,000,013 |
|
December 6, 2014 - January 2, 2015 | — |
| | — |
| | — |
| | 250,000,013 |
|
| 1,152,007 |
| | $ | 28.45 |
| | 1,152,007 |
| | |
| | | | | | | |
As of February 20, 2015, there were approximately 716 holders of record of our common stock.
Dividend Policy
We have not declared or paid any cash dividends on our common stock during any period for which financial information is provided in this Annual Report on Form 10-K. At this time, we intend to retain future earnings, if any, to fund the development and growth of our business and do not anticipate paying any cash dividends on our common stock in the foreseeable future.
Stock Split
On March 20, 2013 we effected a 2-for-1 split of all outstanding shares of our Common Stock to shareholders of record on March 6, 2013. All shares and per share information presented has been adjusted to reflect the stock split on a retroactive basis for all periods presented.
| |
Item 6. | Selected Financial Data |
The following selected consolidated financial data should be read in conjunction with “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our consolidated financial statements and related notes appearing elsewhere in this annual report. Historical results are not necessarily indicative of future results. In particular, because the results of operations and financial condition related to our acquisitions are included in our Consolidated Statements of Income and Consolidated Balance Sheets data commencing on those respective acquisition dates, comparisons of our results of operations and financial condition for periods prior to and subsequent to those acquisitions are not indicative of future results.
|
| | | | | | | | | | | | | | | | | | | |
Fiscal Years | 2014 | | 2013 | | 2012 | | 2011 | | 2010 |
(Dollar in thousands, except per share data) | | | | | | | | | |
Revenue | $ | 2,395,546 |
| | $ | 2,288,124 |
| | $ | 2,040,113 |
| | $ | 1,644,065 |
| | $ | 1,293,937 |
|
Gross margin | $ | 1,290,844 |
| | $ | 1,203,822 |
| | $ | 1,046,177 |
| | $ | 829,581 |
| | $ | 645,501 |
|
Gross margin percentage | 53.9 | % | | 52.6 | % | | 51.3 | % | | 50.5 | % | | 49.9 | % |
Net income attributable to Trimble Navigation Ltd. | $ | 214,118 |
| | $ | 218,855 |
| | $ | 191,060 |
| | $ | 150,755 |
| | $ | 103,660 |
|
Net income | $ | 213,888 |
| | $ | 218,166 |
| | $ | 189,716 |
| | $ | 148,909 |
| | $ | 103,613 |
|
Earnings per share | | | | | | | | | |
—Basic | $ | 0.82 |
| | $ | 0.85 |
| | $ | 0.76 |
| | $ | 0.61 |
| | $ | 0.43 |
|
—Diluted | $ | 0.81 |
| | $ | 0.84 |
| | $ | 0.74 |
| | $ | 0.60 |
| | $ | 0.42 |
|
Shares used in calculating basic earnings per share | 260,103 |
| | 256,648 |
| | 251,132 |
| | 245,450 |
| | 240,704 |
|
Shares used in calculating diluted earnings per share | 264,456 |
| | 261,206 |
| | 256,774 |
| | 252,266 |
| | 247,596 |
|
| | | | | | | | | |
At the End of Fiscal Year | 2014 | | 2013 | | 2012 | | 2011 | | 2010 |
(Dollar in thousands) | | | | | | | | | |
Total assets | $ | 3,874,348 |
| | $ | 3,700,840 |
| | $ | 3,469,104 |
| | $ | 2,652,475 |
| | $ | 1,866,892 |
|
Non-current portion of long-term debt and other non-current liabilities | $ | 769,817 |
| | $ | 733,038 |
| | $ | 931,388 |
| | $ | 543,543 |
| | $ | 194,003 |
|
| |
Item 7. | Management’s Discussion and Analysis of Financial Condition and Results of Operations |
The following discussion should be read in conjunction with the consolidated financial statements and the related notes. The following discussion contains forward-looking statements that reflect our plans, estimates and beliefs. Our actual results could differ materially from those discussed in the forward-looking statements. Factors that could cause or contribute to these differences include, but are not limited to, those discussed below and those listed under “Risks Factors.”
EXECUTIVE LEVEL OVERVIEW
Trimble Navigation Limited is a leading provider of technology solutions that optimize the work processes of office and mobile field professionals around the world. Our comprehensive process solutions are used across a range of industries including agriculture, architecture, civil engineering, construction, environmental management, government, natural resources, transportation and utilities. Representative Trimble customers include engineering and construction firms, contractors, surveying companies, farmers and agricultural companies, enterprise firms with large-scale fleets, energy, mining and utility companies, and state, federal and municipal governments.
Trimble focuses on integrating its broad technological and application capabilities to create vertically-focused, system-level solutions that transform how work is done within the industries we serve. The integration of sensors, software, connectivity, and information in our portfolio gives us the unique ability to provide an information model specific to the customer’s workflow. For example, in construction our strategy is centered on the concept of a “constructible model,” which will provide a real-time, connected, and cohesive information environment for the design, build, and operational phases of a project. In agriculture, we continue to develop “Connected Farm” solutions to optimize operations across the agriculture workflow. In transportation and logistics, we provide transportation companies with tools to enhance fuel efficiency, safety, and transparency across the enterprise.
Our growth strategy is centered on multiple elements:
| |
• | Focus on attractive markets with significant growth and profitability potential - We focus on large markets historically underserved by technology that offer significant potential for long-term revenue growth, profitability and market leadership. Our core industries such as construction, agriculture, and transportation markets are each multi-trillion dollar global industries which operate in increasingly demanding environments with technology adoption in the early phases relative to other industries. With the emergence of mobile computing capabilities, the increasing technological know-how of end users and the compelling return on investment to our customers, we believe many of our markets are ripe for substituting Trimble’s technology and solutions in place of traditional operating methods. |
| |
• | Domain knowledge and technological innovation that benefit a diverse customer base We have over time redefined our technological capabilities from hardware-driven point solutions to integrated work process solutions by developing domain expertise and heavily reinvesting in R&D, capex and acquisitions. We have been spending approximately 13% of revenue historically on R&D and currently hold over 1,000 unique patents. We intend to continue to leverage our divisional structure to take advantage of our technology portfolio and deep domain knowledge to quickly and cost-effectively deliver specific, targeted solutions to each of the verticals we serve. We look for opportunities where the need for technological change is high and which have a requirement for the integration of multiple technologies into complete vertical solutions. |
| |
• | Increasing focus on software and services - Software and services are increasingly important elements of our solutions and are core to our growth strategy. Trimble has an open application programming interface (API) philosophy and open vendor environment which leads to increased adoption of our software offerings. Professional services constitute an additional growth channel that helps our customers integrate and optimize the use of our offerings in their environment. The increased recurring revenue from these solutions will provide us with enhanced business visibility over time. |
| |
• | Geographic expansion with localization strategy - We view international expansion as an important element of our strategy and we continue to position ourselves in geographic markets that will serve as important sources of future growth. We currently have a physical presence in over 35 countries and third party representation in over 100 countries. In 2014, 52% of our sales occurred in countries outside of the U.S. |
| |
• | Optimized distribution channels to best access our markets - We utilize vertically-focused distribution channels that leverage domain expertise to best serve the needs of individual markets domestically and abroad. These channels include independent dealers, joint ventures, original equipment manufacturers (OEM) sales, and distribution alliances with key partners, such as CNH Global, Caterpillar, and Nikon, as well as direct sales to end-users, that provide us with broad market reach and localization capabilities to effectively serve our markets. |
| |
• | Strategic acquisitions - Organic growth continues to be our primary focus, while acquisitions serve to enhance our market position. We acquire businesses that bring technology, products, or distribution capabilities that augment our portfolio and allow us to penetrate existing markets more effectively, or to establish a market beachhead. Our level of success in targeting and effectively integrating acquisitions is an important aspect of our growth strategy. |
Trimble’s focus on these growth drivers has led to growth in revenue and profitability as well as an increasingly diversified business model. Software and services growth is driving increased recurring revenue, leading to improved visibility in our business. As our solutions have expanded, our go to market model has also evolved, with a balanced mix between direct, distribution and OEM customers, and an increasing number of enterprise level customer relationships. Finally, profitability has improved over time, in large part through expansion of gross margins, as software and services have grown both organically and through acquisitions.
CRITICAL ACCOUNTING POLICIES AND ESTIMATES
Our accounting policies are more fully described in Note 2 of the Notes to the Consolidated Financial Statements. The preparation of financial statements and related disclosures in conformity with U.S. generally accepted accounting principles requires us to make judgments, assumptions, and estimates that affect the amounts reported in the Consolidated Financial Statements and accompanying Notes to the Consolidated Financial Statements. We consider the accounting polices described below to be our critical accounting policies. These critical accounting policies are impacted significantly by judgments, assumptions, and estimates used in the preparation of the Consolidated Financial Statements, and actual results could differ materially from the amounts reported based on these policies.
Revenue Recognition
We recognize revenue when it is realized or realizable and earned. We consider revenue realized or realizable and earned when persuasive evidence of an arrangement exists, delivery has occurred, the fee is fixed or determinable, and collectibility is reasonably assured. In instances where final acceptance of the product is specified by the customer or is uncertain, revenue is deferred until all acceptance criteria have been met.
Contracts and/or customer purchase orders are used to determine the existence of an arrangement. Shipping documents and customer acceptance, when applicable, are used to verify delivery. We assess whether the fee is fixed or determinable based on the payment terms associated with the transaction and whether the sales price is subject to refund or adjustment. We assess collectibility based primarily on the creditworthiness of the customer as determined by credit checks and analyses, as well as the customer’s payment history.
Revenue for orders is not recognized until the product is shipped and title has transferred to the buyer. We bear all costs and risks of loss or damage to the goods up to that point. Our shipment terms for U.S. orders and international orders fulfilled from our European distribution center typically provide that title passes to the buyer upon delivery of the goods to the carrier named by the buyer at the named place or point. If no precise point is indicated by the buyer, delivery is deemed to occur when the carrier takes the goods into its charge from the place determined by us. Other shipment terms may provide that title passes to the buyer upon delivery of the goods to the buyer. Shipping and handling costs are included in Cost of sales.
Revenue from sales to distributors and dealers is recognized upon shipment, assuming all other criteria for revenue recognition have been met. Distributors and dealers do not have a right of return.
Revenue from purchased extended warranty and post contract support (PCS) agreements is deferred and recognized ratably over the term of the warranty or support period. Revenue from our subscription services related to our hardware and applications is recognized ratably over the term of the subscription service period beginning on the date that service is made available to the customer, assuming all revenue recognition criteria have been met.
We present revenue net of sales taxes and any similar assessments.
Our software arrangements generally consist of a perpetual license fee and PCS. We generally have established vendor-specific objective evidence (VSOE) of fair value for our PCS contracts based on the renewal rate. The remaining value of the software arrangement is allocated to the license fee using the residual method. License revenue is primarily recognized when the software has been delivered and fair value has been established for all remaining undelivered elements. In cases where VSOE of fair value for PCS is not established, revenue is recognized ratably over the PCS period after all software deliverables have been made and the only the undelivered element is PCS.
For services performed on a fixed-fee basis, revenue is recognized using the proportional performance method, with performance measured based on hours of work performed. For contracts that involve significant customization and implementation or consulting services that are essential to the functionality of the software, the license and services revenues are recognized using the percentage-of-completion method or, if we are unable to reliably estimate the costs to complete the services, we use the completed-contract method of accounting. A contract is considered complete when all significant costs have been incurred or when acceptance from the customer has been received.
Some of our subscription product offerings include hardware, subscription services and extended warranty. Under these hosted arrangements, the customer typically does not have the contractual right to take possession of the software at any time during the hosting period without incurring a significant penalty and it is not feasible for the customer to run the software either on its own hardware or on a third-party’s hardware.
Our multiple deliverable product offerings include hardware with embedded firmware, extended warranty, software, PCS services and subscription services, which are considered separate units of accounting. For certain of our products, software and non-software components function together to deliver the tangible product’s essential functionality.
In evaluating the revenue recognition for our hardware or subscription agreements which contain multiple deliverables, we determined that in certain instances we were not able to establish VSOE for some or all deliverables in an arrangement as we infrequently sold each element on a standalone basis, did not price products within a narrow range, or had a limited sales history. When VSOE cannot be established, we attempt to establish the selling price of each element based on relevant third-party evidence (TPE). TPE is determined based on competitor prices for similar deliverables when sold separately. Generally, our go-to-market strategy differs from that of competitors, and offerings may contain a significant level of proprietary technology, customization or differentiation such that the comparable pricing of products with similar functionality cannot be obtained. Furthermore, we are unable to reliably determine what similar competitor products’ selling prices are on a stand-alone basis. Therefore, we typically are not able to establish the selling price of an element based on TPE.
When we are unable to establish selling price using VSOE or TPE, we use our best estimate of selling price (BESP) in our allocation of arrangement consideration. The objective of BESP is to determine the price at which we would transact a sale if the product or service were sold on a stand-alone basis. BESP is generally used for offerings that are not typically sold on a stand-alone basis or for new or highly customized offerings. We determine BESP for a product or service by considering multiple factors including, but not limited to, pricing practices, market conditions, competitive landscape, internal costs, geographies and gross margin. The determination of BESP is made through consultation with and formal approval by our management, taking into consideration our go-to-market strategy.
Allowance for Doubtful Accounts
Our accounts receivable balance, net of allowance for doubtful accounts and sales returns reserve, was $362.0 million at the end of fiscal 2014, as compared with $337.9 million at the end of fiscal 2013. The allowance for doubtful accounts was $7.8 million and $6.3 million at the end of fiscal 2014 and 2013, respectively. We evaluate ongoing collectibility of our trade accounts receivable based on a number of factors such as age of the accounts receivable balances, credit quality, historical experience, and current economic conditions that may affect a customer’s ability to pay. In circumstances where we are aware of a specific customer’s inability to meet its financial obligations to us, a specific allowance for bad debts is estimated and recorded which reduces the recognized receivable to the estimated amount we believe will ultimately be collected. In addition to specific customer identification of potential bad debts, bad debt charges are recorded based on our recent past loss history and an overall assessment of past due trade accounts receivable amounts outstanding.
Inventory Valuation
Our inventories, net balance was $278.1 million at the end of fiscal 2014 as compared with $254.3 million at the end of fiscal 2013. Our inventory allowances at the end of fiscal 2014 were $41.1 million, as compared with $40.6 million at the end of fiscal 2013. Our inventories are stated at the lower of cost or market. Adjustments are also made to reduce the cost of inventory for estimated excess or obsolete balances. Factors influencing these adjustments include declines in demand, technological changes, product life cycle and development plans, component cost trends, product pricing, physical deterioration and quality issues.
Income Taxes
Income taxes are accounted for under the liability method whereby deferred tax asset or liability account balances are calculated at the balance sheet date using current tax laws and rates in effect for the year in which the differences are expected to affect taxable income. A valuation allowance is recorded to reduce the carrying amounts of deferred tax assets if it is more likely than not such assets will not be realized.
Relative to uncertain tax positions, we only recognize the tax benefit if it is more likely than not that the tax position will be sustained on examination by the taxing authorities, based on the technical merits of the position. The tax benefits recognized in the financial statements from such positions are then measured based on the largest benefit that has a greater than 50% likelihood of being realized upon ultimate settlement. Our practice is to recognize interest and/or penalties related to income tax matters in income tax expense.
Our valuation allowance is primarily attributable to foreign net operating losses and state research and development credit carryforwards. Management believes that it is more likely than not that we will not realize these deferred tax assets, and, accordingly, a valuation allowance has been provided for such amounts. Valuation allowance adjustments associated with an acquisition after the measurement period are recorded through income tax expense.
Business Combinations
We allocate the fair value of purchase consideration to the assets acquired, liabilities assumed, and non-controlling interests in the acquiree based on their fair values at the acquisition date. The excess of the fair value of purchase consideration over the fair value of these assets acquired, liabilities assumed and non-controlling interests in the acquiree is recorded as goodwill.
When determining the fair values of assets acquired, liabilities assumed, and non-controlling interests in the acquiree, management makes significant estimates and assumptions, especially with respect to intangible assets. Critical estimates in valuing intangible assets include, but are not limited to, expected future cash flows, which includes consideration of future growth rates and margins, customer attrition rates, future changes in technology and brand awareness, loyalty and position, and discount rates. Fair value estimates are based on the assumptions management believes a market participant would use in pricing the asset or liability. Amounts recorded in a business combination may change during the measurement period, which is a period not to exceed one year from the date of acquisition, as additional information about conditions existing at the acquisition date becomes available.
Goodwill and Purchased Intangible Assets
Goodwill represents the excess of the purchase consideration over the fair value of the net tangible and identifiable intangible assets acquired in a business combination. Intangible assets acquired individually, with a group of other assets, or in a business combination, are recorded at fair value. Identifiable intangible assets are comprised of distribution channels and distribution rights, patents, licenses, technology, acquired backlog, trademarks, and in-process research and development. The fair value of intangible assets acquired is generally determined based on a discounted cash flow analysis. Identifiable intangible assets are being amortized over the period of estimated benefit using the straight-line method, reflecting the pattern of economic benefits associated with these assets, and have estimated useful lives ranging from one to twelve years with a weighted average useful life of 6.3 years. Goodwill is not subject to amortization, but is subject to at least an annual assessment for impairment, applying a fair-value based test.
Impairment of Goodwill, Intangible Assets and Other Long-Lived Assets
We evaluate goodwill, at a minimum, on an annual basis and whenever events and changes in circumstances suggest that the carrying amount may not be recoverable. The annual goodwill impairment testing is performed in the fourth fiscal quarter of each year based on the values on the first day of that quarter. Goodwill was reviewed for impairment utilizing a quantitative two-step process. In the first step of this test, goodwill is tested for impairment at the reporting unit level by comparing the reporting unit’s carrying amount, including goodwill, to the fair value of the reporting unit. The fair values of the reporting units are estimated using a discounted cash flow approach. If the carrying amount of the reporting unit exceeds its fair value, a second step is performed to measure the amount of impairment loss, if any. In step two, the implied fair value of goodwill is calculated as the excess of the fair value of a reporting unit over the fair values assigned to its assets and liabilities. If the implied fair value of goodwill is less than the carrying value of the reporting unit’s goodwill, the difference is recognized as an impairment loss. When we perform a quantitative assessment of goodwill impairment, the determination of fair value of a reporting unit involves the use of significant estimates and assumptions. The discounted cash flows are based upon, among other things, assumptions about expected future operating performance using risk-adjusted discount rates. Actual future results may differ from those estimates. As of the first day of the fourth quarter of fiscal 2014, for each reporting unit, our estimated fair values exceeded the carrying value by substantial margins on a percentage basis. For certain earlier stage reporting units, due to the smaller magnitude of the carrying value and fair value of each respective reporting unit, the margins by which the fair value exceeded the carrying value on an absolute dollar basis were relatively small.
Depreciation and amortization of the intangible assets and other long-lived assets is provided using the straight-line method over their estimated useful lives, reflecting the pattern of economic benefits associated with these assets. Changes in circumstances such as technological advances, changes to our business model, or changes in the capital strategy could result in the actual useful lives of intangible assets or other long-lived assets differing from initial estimates. In cases where we determine that the useful life of an asset should be revised, the net book value in excess of the estimated residual value will be depreciated over its revised remaining useful life. These assets are evaluated for impairment whenever events or changes in circumstances indicate that the carrying amount of such assets may not be recoverable based on their future cash flows. The estimated future cash flows are based upon, among other things, assumptions about expected future operating performance and these estimates may differ from actual future cash flows. The assets evaluated for impairment are grouped with other assets to the lowest level for which identifiable cash flows are largely independent of the cash flows of other groups of assets and liabilities. If the sum of the projected undiscounted
cash flows (excluding interest) is less than the carrying value of the assets, the assets will be written down to the estimated fair value.
Warranty Costs
The liability for product warranties was $20.6 million at the end of fiscal 2014, as compared with $17.8 million at the end of fiscal 2013. We accrue for warranty costs as part of cost of sales based on associated material product costs, technical support labor costs, and costs incurred by third parties performing work on our behalf. Our expected future cost is primarily estimated based upon historical trends in the volume of product returns within the warranty period and the cost to repair or replace the equipment. When products sold include warranty provisions, they are covered by a warranty for periods ranging from 90 days to 5.5 years.
While we engage in extensive product quality programs and processes, including actively monitoring and evaluating the quality of our component suppliers, our warranty obligation is affected by product failure rates, material usage, and service delivery costs incurred in correcting a product failure. Should actual product failure rates, material usage, or service delivery costs differ from our estimates, revisions to the estimated warranty accrual and related costs may be required.
Stock-Based Compensation
We recognize compensation expense for all share-based payment awards made to our employees and directors based on estimated fair values. The grant date fair value for options is estimated using a binomial valuation model. The fair value of rights to purchase shares under our employee stock purchase plan is estimated using the Black-Scholes option-pricing model. The fair value of restricted stock units is determined based on the closing price of our common stock on the date of grant.
The determination of fair value of share-based payment awards on the date of grant using an option-pricing model is affected by our stock price as well as assumptions regarding a number of highly complex and subjective variables. These variables include our expected stock price volatility over the term of the awards, actual and projected employee stock option exercise behaviors, risk-free interest rates, and any expected dividends. In addition, the binomial model incorporates actual option-pricing behavior and changes in volatility over the option’s contractual term.
We base the expected stock price volatility for stock purchase rights on implied volatilities of traded options on our stock and our expected stock price volatility for stock options is based on a combination of our historical stock price volatility for the period commensurate with the expected life of the stock option and the implied volatility of traded options. The use of implied volatilities is based upon the availability of actively traded options on our stock with terms similar to our awards and also upon our assessment that implied volatility is more representative of future stock price trends than historical volatility. However, because the expected life of our stock options is greater than the terms of our traded options, we use a combination of our historical stock price volatility commensurate with the expected life of our stock options and implied volatility of traded options.
We estimate the expected life of the awards based on an analysis of our historical experience of employee exercise and post-vesting termination behavior considered in relation to the contractual life of the options and purchase rights. The risk-free interest rate assumption is based upon observed interest rates appropriate for the expected term of the awards.
We do not currently pay cash dividends on our common stock and do not anticipate doing so in the foreseeable future. Accordingly, our expected dividend yield is zero.
Stock-based compensation expense recognized in the Consolidated Statement of Income for fiscal 2014, 2013 and 2012 is based on awards ultimately expected to vest, and has been reduced for estimated forfeitures. The stock-based compensation guidance requires forfeitures to be estimated at the time of grant and revised, if necessary, in subsequent periods if actual forfeitures differ from those estimates. Forfeitures were estimated based on historical experience.
If factors change and we employ different assumptions to determine the fair value of our share-based payment awards granted in future periods, the compensation expense that we record under it may differ significantly from what we have recorded in the current period. In addition, valuation models, including the Black-Scholes and binomial models, may not provide reliable measures of the fair values of our stock-based compensation. Consequently, there is a risk that our estimates of the fair values of our stock-based compensation awards on the grant dates may bear little resemblance to the actual values realized upon the exercise, expiration, early termination, or forfeiture of those stock-based payments in the future. Certain stock-based payments, such as employee stock options, may expire worthless or otherwise result in zero intrinsic value as compared to the fair values originally estimated on the grant date and reported in our financial statements. Alternatively, values may be realized from these instruments that are significantly higher than the fair values originally estimated on the grant date and reported in our financial statements.
RESULTS OF OPERATIONS
Overview
The following table is a summary of revenue, gross margin and operating income for the periods indicated and should be read in conjunction with the narrative descriptions below.
|
| | | | | | | | | | | |
Fiscal Years | 2014 | | 2013 | | 2012 |
(Dollars in thousands) | | | | | |
Revenues: | | | | | |
Product | $ | 1,713,564 |
| | $ | 1,649,965 |
| | $ | 1,566,975 |
|
Service | 396,062 |
| | 364,274 |
| | 262,889 |
|
Subscription | 285,920 |
| | 273,885 |
| | 210,249 |
|
Total revenue | $ | 2,395,546 |
| | $ | 2,288,124 |
| | $ | 2,040,113 |
|
Gross margin | 1,290,844 |
| | 1,203,822 |
| | 1,046,177 |
|
Gross margin % | 53.9 | % | | 52.6 | % | | 51.3 | % |
Total consolidated operating income | 260,823 |
| | 251,737 |
| | 212,568 |
|
Operating income as a % of revenue | 10.9 | % | | 11.0 | % | | 10.4 | % |
Basis of Presentation
We have a 52-53 week fiscal year, ending on the Friday nearest to December 31, which for fiscal 2014 was January 2, 2015. Fiscal 2014 and 2012 were both 52-week years. Fiscal 2013 was a 53-week year.
Revenue
In fiscal 2014, total revenue increased by $107.4 million, or 5%, to $2.40 billion from $2.29 billion in fiscal 2013. Of this increase, product revenue increased $63.6 million, or 4%, service revenue increased $31.8 million, or 9%, and subscription revenue increased $12.0 million, or 4%. The product and service increase in fiscal 2014 as compared to fiscal 2013 was driven primarily by growth across Engineering and Construction and Mobile Solutions, which included organic growth, and to a lesser extent, the impact of acquisitions. Product revenue growth was partially offset by a significant decrease in Field Solutions revenue primarily due to softness in Agriculture. Subscription growth was driven by growth in Mobile Solutions, partially offset by our change in accounting for Virtual Site Solutions, our joint venture with Caterpillar, which is now treated as an equity method investment. In the prior year, as a majority owner, we consolidated Virtual Site Solutions results and Virtual Site Solutions revenue was included in Engineering and Construction subscription revenue. We consider organic growth to include all revenue except for revenue associated with acquisitions made within the last four quarters.
On a segment basis, the increase in fiscal 2014 was primarily due to Engineering and Construction and Mobile Solutions, and to a lesser extent Advanced Devices. Engineering and Construction revenue increased $126.1 million, or 10%, Mobile Solutions increased $21.7 million, or 5%, and Advanced Devices increased $11.5 million, or 9%, partially offset by a decrease in Field Solutions of $51.8 million, or 11%, as compared to fiscal 2013. Revenue growth within Engineering and Construction was driven primarily by organic growth due to building construction, heavy civil, and to a lesser extent, survey products in the U.S. and Europe, with the exception of Russia which was significantly down. To a lesser extent, acquisitions contributed to the growth. Mobile Solutions revenue increased primarily due to organic growth in the transportation and logistics market. Advanced Devices revenue increased due to stronger sales of embedded and timing components. Field Solutions revenue decreased significantly primarily due to softness in agricultural markets. Overall, although foreign currency had a negative impact on revenue in the fourth quarter, the impact on a full year basis was minor. Consistent with the fourth quarter, we expect foreign currency will continue to have a negative impact in 2015, particularly in Engineering and Construction.
In fiscal 2013, total revenue increased by $248.0 million, or 12%, to $2.29 billion from $2.04 billion in fiscal 2012. Of this increase, product revenue increased $83.0 million, or 5%, service revenue increased $101.4 million, or 39%, and subscription revenue increased $63.6 million, or 30%. The product and service revenue increase in fiscal 2013 as compared to fiscal 2012 was driven primarily by growth across Engineering and Construction and Mobile Solutions, which included organic growth as well as the impact of the TMW acquisition. The product revenue growth was slightly offset by a decrease in Fields Solutions revenue primarily due to softness in GIS markets.
On a segment basis, the increase in fiscal 2013 was primarily due to stronger results from the Engineering and Construction, Field Solutions and Mobile Solutions segments. Engineering and Construction revenue increased $132.6 million, or 12%, Mobile Solutions increased $117.0 million, or 34%, and Advanced Devices increased $6.5 million, or 5%, partially offset by a decrease
in Field Solutions of $8.1 million, or 2%, as compared to fiscal 2012. Revenue growth within Engineering and Construction was driven primarily by organic growth due to global sales of building construction, and to a lesser extent, heavy civil and survey products in the U.S. and Europe. Mobile Solutions revenue increased primarily due to organic growth in the transportation and logistics market, as well as acquisitions, including TMW, which was acquired in the fourth quarter of fiscal 2012. Advanced Devices revenue increased primarily due to stronger sales of RFID product solutions. Field Solutions revenue decreased slightly due to softness in GIS markets associated with economic uncertainties in the U.S., which was partially offset by increased agricultural sales.
During fiscal 2014, sales to customers in the United States represented 48%, Europe represented 24%, Asia Pacific represented 14%, and other regions represented 14% of our total revenue. During fiscal 2013, sales to customers in the United States represented 49%, Europe represented 23%, Asia Pacific represented 14%, and other regions represented 14% of our total revenue. During fiscal 2012, sales to customers in the United States represented 47%, Europe represented 22%, Asia Pacific represented 16%, and other regions represented 15% of our total revenue. We anticipate that sales to international customers will continue to account for a significant portion of our revenue.
No single customer accounted for 10% or more of our total revenue in fiscal 2014, 2013 and 2012.
Gross Margin
Our gross margin varies due to a number of factors including product mix, pricing, distribution channel, production volumes, new product start-up costs, and foreign currency translations.
In fiscal 2014, our gross margin increased by $87.0 million as compared to fiscal 2013 primarily due to the increase in total revenue. Gross margin as a percentage of total revenue was 53.9% in fiscal 2014 and 52.6% in fiscal 2013. The increase in the gross margin percentage was due to improved product mix in Engineering and Construction and Mobile Solutions, particularly software, software maintenance and subscription revenue. This was partially offset by higher amortization of purchased intangibles and lower gross margin in Field Solutions due to manufacturing underutilization.
In fiscal 2013, our gross margin increased by $157.6 million as compared to fiscal 2012 primarily due to the increase in total revenue. Gross margin as a percentage of total revenue was 52.6% in fiscal 2013 and 51.3% in fiscal 2012. The increase in the gross margin percentage was due to improved product mix in Engineering and Construction and Mobile Solutions, particularly software, software maintenance and subscription revenue as well as the TMW acquisition, which was partially offset by higher amortization of purchased intangibles.
Operating Income
Operating income decreased by $9.1 million for fiscal 2014 as compared to fiscal 2013. Operating income as a percentage of total revenue for fiscal 2014 was 10.9% as compared to 11.0% for fiscal 2013. The decrease in operating income and operating income percentage was primarily due to the revenue decrease in Field Solutions and the impact of acquisitions in Engineering and Construction in the fourth quarter of the year. The decrease was partially offset by gross margin improvements due to higher margin software, maintenance, and subscription revenue.
Operating income increased by $39.2 million for fiscal 2013 as compared to fiscal 2012. Operating income as a percentage of total revenue for fiscal 2013 was 11.0% as compared to 10.4% for fiscal 2012. The increase in operating income and operating income percentage was primarily driven by higher revenue and product mix due to higher margin software, service and subscription revenue. The increase was partially offset by higher amortization of purchased intangibles due to acquisitions.
Results by Segment
To achieve distribution, marketing, production, and technology advantages in our targeted markets, we manage our operations in the following four segments: Engineering and Construction, Field Solutions, Mobile Solutions, and Advanced Devices. Segment operating income equals net revenue less cost of sales and operating expense, excluding general corporate expense, amortization of purchased intangible assets, amortization of inventory step-up, acquisition costs, and restructuring charges.
The following table is a breakdown of revenue and operating income by segment for the periods indicated and should be read in conjunction with the narrative descriptions below.
|
| | | | | | | | | | | |
Fiscal Years | 2014 | | 2013 | | 2012 |
(Dollars in thousands) | | | | | |
Engineering and Construction | | | | | |
Revenue | $ | 1,348,129 |
| | $ | 1,222,040 |
| | $ | 1,089,424 |
|
Segment revenue as a percent of total revenue | 56 | % | | 53 | % | | 53 | % |
Operating income | $ | 268,856 |
| | $ | 251,258 |
| | $ | 207,174 |
|
Operating income as a percent of segment revenue | 20 | % | | 21 | % | | 19 | % |
Field Solutions | | | | | |
Revenue | $ | 422,090 |
| | $ | 473,891 |
| | $ | 481,962 |
|
Segment revenue as a percent of total revenue | 18 | % | | 21 | % | | 24 | % |
Operating income | $ | 134,198 |
| | $ | 173,114 |
| | $ | 182,134 |
|
Operating income as a percent of segment revenue | 32 | % | | 37 | % | | 38 | % |
Mobile Solutions | | | | | |
Revenue | $ | 486,819 |
| | $ | 465,138 |
| | $ | 348,147 |
|
Segment revenue as a percent of total revenue | 20 | % | | 20 | % | | 17 | % |
Operating income | $ | 72,876 |
| | $ | 63,961 |
| | $ | 32,459 |
|
Operating income as a percent of segment revenue | 15 | % | | 14 | % | | 9 | % |
Advanced Devices | | | | | |
Revenue | $ | 138,508 |
| | $ | 127,055 |
| | $ | 120,580 |
|
Segment revenue as a percent of total revenue | 6 | % | | 6 | % | | 6 | % |
Operating income | $ | 42,326 |
| | $ | 26,577 |
| | $ | 19,166 |
|
Operating income as a percent of segment revenue | 31 | % | | 21 | % | | 16 | % |
A reconciliation of our consolidated segment operating income to consolidated income before income taxes follows:
|
| | | | | | | | | | | |
Fiscal Years | 2014 | | 2013 | | 2012 |
(in thousands) | | | | | |
Consolidated segment operating income | $ | 518,256 |
| | $ | 514,910 |
| | $ | 440,933 |
|
Unallocated corporate expense | (85,472 | ) | | (86,788 | ) | | (82,203 | ) |
Acquisition costs | (13,449 | ) | | (13,544 | ) | | (20,455 | ) |
Amortization of purchased intangible assets | (158,512 | ) | | (162,841 | ) | | (125,707 | ) |
Consolidated operating income | 260,823 |
| | 251,737 |
| | 212,568 |
|
Non-operating income, net | 5,192 |
| | 1,127 |
| | 16,856 |
|
Consolidated income before taxes | $ | 266,015 |
| | $ | 252,864 |
| | $ | 229,424 |
|
Unallocated corporate expense includes general corporate expense, amortization of acquisition-related inventory step-up, restructuring costs and litigation reserves.
Engineering and Construction
Engineering and Construction revenue increased by $126.1 million, or 10%, while segment operating income increased by $17.6 million, or 7%, for fiscal 2014 as compared to fiscal 2013. The revenue growth was primarily driven by organic growth in the global sales of building construction and heavy civil, and to a lesser extent, survey products in markets that were relatively stable. The impact of acquisition revenue on the full year was relatively minor. Sales were relatively strong in the U.S., particularly for building construction products and heavy civil products which continued to grow, however European markets demonstrated some slowness in growth. Growth was driven by increased adoption of our products, particularly in the construction industry as technology is playing a broader role in increasing productivity and reducing costs. Survey sales were relatively strong during the year, but slowed in the fourth quarter as oil and gas and the macroeconomic conditions in Russia impacted survey sales. To the extent that these trends continue, our results of operations will be further impacted. Additionally, although foreign currency had a minor impact on the full year, we expect foreign currency will have a negative impact in 2015.
Segment operating income increased primarily due to higher revenue and a more favorable product mix, including higher margin software, service, and subscription revenue. This was partially offset by the impact of increased operating expenses due in part to the impact of acquisitions. Although acquisitions contributed to revenue, they also presented a short term negative impact on revenue and operating income, partly because of deferred revenue accounting effects. We expect these revenue recognition effects to impact the first half of 2015 as well.
Engineering and Construction revenue increased by $132.6 million, or 12%, while segment operating income increased by $44.1 million, or 21%, for fiscal 2013 as compared to fiscal 2012. The revenue growth was primarily driven by organic growth in the global sales of building construction, and to a lesser extent, heavy highway and survey products in markets that were relatively stable. Sales were strong in the U.S., particularly for building construction products, as the residential and commercial construction markets continued to strengthen. To a lesser extent, Europe was also up. Heavy civil, which continued to grow, was challenged by the combined effects of the Australian recession, the lack of European investment and limits on U.S. highway funding. Survey instruments growth was stable. Segment operating income increased primarily due to higher revenue and product mix, including higher margin software, service, and subscription revenue.
Field Solutions
Field Solutions revenue decreased by $51.8 million, or 11%, while segment operating income decreased by $38.9 million, or 22%, for fiscal year 2014 as compared to fiscal 2013. The revenue decrease was primarily due to softness in agriculture markets where the market environment grew significantly more difficult in the last half of the year.
On a macroeconomic level, commodity prices and farmer income are both down. Large cutbacks coming from elements of our distribution and OEM customers contributed to the sales slowdown in North America, and to a lesser extent, South America, and Europe. We believe that the softness in agriculture will continue and our results of operations will be impacted in 2015. The agriculture decrease was partially offset by a slight increase in Geographic Information System (GIS) sales. Segment operating income decreased primarily due to reduced operating leverage in Agriculture.
Field Solutions revenue decreased by $8.1 million, or 2%, while segment operating income decreased by $9.0 million, or 5%, for fiscal year 2013 as compared to fiscal 2012. The revenue decrease was primarily due to a decline in GIS markets which continued to be impacted by the pullback of government funding sources, particularly in the U.S. Agriculture was moderately up over the prior year. Weather conditions in the first half of the year, particularly in the U.S. resulted in slower than anticipated agriculture sales. However, sales increased in the second half of the year, with relatively strong growth in Europe. Segment operating income decreased due to reduced operating leverage in GIS.
Mobile Solutions
Mobile Solutions revenue increased by $21.7 million, or 5%, while segment operating income increased by $8.9 million, or 14% for fiscal year 2014 as compared to fiscal 2013. The revenue increase was primarily due to continued organic growth in the transportation and logistics market, which focuses on enterprise solutions. This was partially offset by a decline in field services as the focus shifts to more vertical markets. The majority of the sales are in the U.S., however there is continued focus on geographic expansion which contributed to growth for the year. Operating income increased due to increased revenue and product mix, including higher software, maintenance and subscription revenue, as well as product cost reductions.
Mobile Solutions revenue increased by $117.0 million, or 34%, while segment operating income increased by $31.5 million, or 97% for fiscal year 2013 as compared to fiscal 2012. The revenue increase was primarily due to organic growth in the transportation and logistics market, as well as acquisitions not applicable in the prior periods including TMW which was acquired in the fourth quarter of 2012. Operating income increased due primarily to increased revenue and a more favorable product mix, including higher software, maintenance and subscription revenue.
Advanced Devices
Advanced Devices revenue increased by $11.5 million, or 9%, and segment operating income increased by $15.7 million, or 59%, for fiscal 2014 as compared to fiscal 2013. The increase in revenue and operating income was primarily driven by increased sales of timing and embedded component products as well as strong operating control.
Advanced Devices revenue increased by $6.5 million, or 5%, and segment operating income increased by $7.4 million, or 39%, for fiscal 2013 as compared to fiscal 2012. The increase in revenue and operating income was primarily driven by increased sales of timing, inertial/GNSS positioning and orientation systems, and military specific products.
Research and Development, Sales and Marketing, and General and Administrative Expenses
The following table shows research and development (“R&D”), sales and marketing, and general and administrative (“G&A”) expenses in absolute dollars and as a percentage of total revenue for fiscal years 2014, 2013 and 2012 and should be read in conjunction with the narrative descriptions of those operating expenses below.
|
| | | | | | | | | | | |
Fiscal Years | 2014 | | 2013 | | 2012 |
(Dollars in thousands) | | | | | |
Research and development | $ | 317,992 |
| | $ | 299,421 |
| | $ | 256,458 |
|
Percentage of revenue | 13 | % | | 13 | % | | 13 | % |
Sales and marketing | 387,569 |
| | 348,106 |
| | 313,692 |
|
Percentage of revenue | 16 | % | | 15 | % | | 15 | % |
General and administrative | 247,120 |
| | 216,876 |
| | 195,802 |
|
Percentage of revenue | 10 | % | | 9 | % | | 9 | % |
Total | $ | 952,681 |
| | $ | 864,403 |
| | $ | 765,952 |
|
Percentage of revenue | 40 | % | | 38 | % | | 38 | % |
Overall, R&D, sales and marketing, and G&A expenses increased by approximately $88.3 million in fiscal 2014 compared to fiscal 2013. Substantially all of our R&D costs have been expensed as incurred.
Research and development expense increased by $18.6 million in fiscal 2014, as compared to fiscal 2013. Overall research and development spending was at approximately 13% of revenue in both fiscal 2014 and 2013. The increase in R&D expense in fiscal 2014, as compared to fiscal 2013 was primarily due to the inclusion of expense of $11.9 million from acquisitions not applicable in fiscal 2013, a $5.7 million increase in consulting expense and a $2.6 million increase in compensation related expense and a $0.7 million increase in other expense, partially offset by a $2.3 million decrease due to favorable foreign currency exchange rates.
Research and development expense increased by $43.0 million in fiscal 2013, as compared to fiscal 2012. Overall research and development spending was at approximately 13% of revenue in both fiscal 2013 and 2012. The increase in R&D expense in fiscal 2013, as compared to fiscal 2012 was primarily due to the inclusion of expense of $31.6 million from acquisitions not applicable in fiscal 2012, a $9.7 million increase in compensation related expense associated with headcount increases for product development, and a $1.6 million increase due to unfavorable foreign currency exchange rates.
We believe that the development and introduction of new products are critical to our future success and we expect to continue active development of new products.
Sales and marketing expense increased by $39.5 million in fiscal 2014 as compared to fiscal 2013. Spending overall was at approximately 16% of revenue in fiscal 2014 compared to 15% in fiscal 2013. The increase in sales and marketing expense in fiscal 2014, as compared to fiscal 2013 was primarily due to the inclusion of expense of $13.2 million from acquisitions not applicable in the prior period, an $16.0 million increase in compensation related expense associated with increased headcount and commission costs, a $9.7 million increase in travel/marketing cost primarily due to global dealer meetings and trade shows, including our biennial Dimensions customer conference and a $2.4 million increase in other expense. This was partially offset by a $1.8 million decrease due to favorable foreign currency exchange rates.
Sales and marketing expense increased by $34.4 million in fiscal 2013 as compared to fiscal 2012. Spending overall was at approximately 15% of revenue in both fiscal 2013 and 2012. The increase in sales and marketing expense in fiscal 2013, as compared to fiscal 2012 was primarily due to the inclusion of expense of $24.9 million from acquisitions not applicable in the prior period, an $8.0 million increase in compensation related expense, and a $1.1 million increase due to unfavorable foreign currency exchange rates.
General and administrative expense increased by $30.2 million in fiscal 2014 compared to fiscal 2013. Spending overall was at approximately 10% of revenue in fiscal 2014 compared to 9% in fiscal 2013. The increase in general and administrative expense in fiscal 2014, as compared to fiscal 2013 was primarily due to the inclusion of expense of $13.2 million from acquisitions not applicable in the prior year, an $8.2 million increase in compensation related expense which includes a $4.2 million increase in stock compensation costs, a $5.8 million increase in IT/facility related expense, and a $4.2 million increase in telecommunication expense, partially offset by a $1.2 million decrease in other expense.
General and administrative expense increased by $21.1 million in fiscal 2013 compared to fiscal 2012. Spending overall was at approximately 9% of revenue in fiscal 2013 compared to 10% in fiscal 2012. The increase in general and administrative expense in fiscal 2013, as compared to fiscal 2012 was primarily due to the inclusion of expense of $23.6 million from acquisitions not
applicable in the prior year, a $3.0 million increase in tax, legal and consulting expense and a $1.4 million increase in other expense, partially offset by a $6.9 million decrease in non-recurring acquisition related costs.
Other Operating Expenses
Amortization of Purchased and Other Intangible Assets
|
| | | | | | | | | | | |
Fiscal Years | 2014 | | 2013 | | 2012 |
(in thousands) | | | | | |
Cost of sales | $ | 82,913 |
| | $ | 81,119 |
| | $ | 60,277 |
|
Operating expenses | 75,599 |
| | 81,722 |
| | 65,430 |
|
Total | $ | 158,512 |
| | $ | 162,841 |
| | $ | 125,707 |
|
Total amortization expense of purchased and other intangible assets was $158.5 million in fiscal 2014, of which $82.9 million was recorded in Cost of sales and $75.6 million was recorded in Operating expenses. Total amortization expense of purchased and other intangibles represented 6.6% of revenue in fiscal 2014, a decrease of $4.3 million from fiscal 2013 when it represented 7.1% of revenue. The decrease was primarily due to the expiration of amortization for prior acquisitions, partially offset by acquisitions not included in fiscal 2013.
Total amortization expense of purchased and other intangible assets was $162.8 million in fiscal 2013, of which $81.1 million was recorded in Cost of sales and $81.7 million was recorded in Operating expenses. Total amortization expense of purchased and other intangibles represented 7.1% of revenue in fiscal 2013, an increase of $37.1 million from fiscal 2012 when it represented 6.2% of revenue. The increase was primarily due to the TMW, Actronic and ALK acquisitions and to a lesser extent, other acquisitions made in fiscal 2013, as well as fiscal 2012 acquisition intangibles that included a full year impact of amortization expense in fiscal 2013.
Non-operating Income, Net
The following table shows non-operating income, net for the periods indicated and should be read in conjunction with the narrative descriptions below:
|
| | | | | | | | | | | |
Fiscal Years | 2014 | | 2013 | | 2012 |
(in thousands) | | | | | |
Interest expense, net | $ | (18,681 | ) | | $ | (17,582 | ) | | $ | (16,357 | ) |
Foreign currency transaction loss, net | (5,084 | ) | | (954 | ) | | (2,526 | ) |
Income from equity method investments, net | 12,368 |
| | 20,680 |
| | 24,727 |
|
Other income (loss), net | 16,589 |
| | (1,017 | ) | | 11,012 |
|
Total non-operating income, net | $ | 5,192 |
| | $ | 1,127 |
| | $ | 16,856 |
|
Total non-operating income, net increased by $4.1 million during fiscal 2014 compared with fiscal 2013. The increase was primarily due to a gain on a partial equity sale of Virtual Site Solutions (included in Other income (loss), net), partially offset by lower profitability from joint ventures, and the impact of foreign currency transaction fluctuations.
Total non-operating income, net decreased by $15.7 million during fiscal 2013 compared with fiscal 2012. The decrease was primarily due to an increase in interest expense due to higher average debt balances outstanding, the impact of lower income from equity method investments, namely joint ventures, and gains on the sale of several investments included in Other income, net in the prior year, partially offset by the impact of foreign currency transaction fluctuations.
Income Tax Provision
Our effective income tax rates for fiscal 2014, 2013 and 2012 were 20%, 14% and 17%, respectively. The fiscal 2014 rate was less than the U.S. federal statutory rate of 35% primarily due to the geographical mix of our pre-tax income and, to a lesser extent, the inclusion of the current year U.S. federal R&D credit, partially offset by the effect of a gain on a partial equity sale of VSS. The fiscal 2013 rate was less than the U.S. federal statutory rate of 35% primarily due to the geographical mix of our pre-tax income and, to a lesser extent, the inclusion of the current year U.S. federal R&D credit, the favorable benefit of the retroactive reinstatement of the 2012 R&D credit and the benefit of the tax rate reduction in Finland. The fiscal 2012 rate was less than the federal statutory rate of 35% primarily due to the geographical mix of our pre-tax income.
OFF-BALANCE SHEET ARRANGEMENTS
Other than operating lease, inventory purchase and other commitments incurred in the normal course of business (see Contractual Obligations table below), we do not have any off-balance sheet financing arrangements or liabilities, guarantee contracts, retained or contingent interests in transferred assets, or any obligation arising out of a material variable interest in an unconsolidated entity. We do not have any majority-owned subsidiaries that are not included in the consolidated financial statements. Additionally, we do not have any interest in, or relationship with, any special purpose entities.
In the normal course of business to facilitate sales of its products, we indemnify other parties, including customers, lessors, and parties to other transactions with us, with respect to certain matters. We have agreed to hold the other party harmless against losses arising from a breach of representations or covenants, or out of intellectual property infringement or other claims made against certain parties. These agreements may limit the time within which an indemnification claim can be made and the amount of the claim. In addition, we have entered into indemnification agreements with our officers and directors, and our bylaws contain similar indemnification obligations to our agents.
It is not possible to determine the maximum potential exposure under these indemnification agreements due to the limited history of prior indemnification claims and the unique facts and circumstances involved in each particular agreement. Historically, payments made by us under these agreements have not been material and no liabilities have been recorded for these obligations on the Consolidated Balance Sheets at the end of fiscal 2014 and 2013.
LIQUIDITY AND CAPITAL RESOURCES
|
| | | | | | | | | | | |
At the End of Fiscal Year | 2014 | | 2013 | | 2012 |
(Dollars in thousands) | | | | | |
Cash and cash equivalents | $ | 148,000 |
| | $ | 147,227 |
| | $ | 157,771 |
|
As a percentage of total assets | 3.8 | % | | 4.0 | % | | 4.5 | % |
Total debt | $ | 738,446 |
| | $ | 758,458 |
| | $ | 911,158 |
|
Fiscal Years | 2014 | | 2013 | | 2012 |
(Dollars in thousands) | | | | | |
Cash provided by operating activities | $ | 407,083 |
| | $ | 414,635 |
| | $ | 340,700 |
|
Cash used in investing activities | $ | (344,046 | ) | | $ | (324,764 | ) | | $ | (764,286 | ) |
Cash provided by (used in) financing activities | $ | (51,524 | ) | | $ | (98,419 | ) | | $ | 426,407 |
|
Effect of exchange rate changes on cash and cash equivalents | $ | (10,740 | ) | | $ | (1,996 | ) | | $ | 329 |
|
Net increase (decrease) in cash and cash equivalents | $ | 773 |
| | $ | (10,544 | ) | | $ | 3,150 |
|
Cash and Cash Equivalents
At the end of fiscal 2014, cash and cash equivalents totaled $148.0 million compared to $147.2 million at the end of fiscal 2013. We had debt of $738.4 million at the end of fiscal 2014 compared to $758.5 million at the end of fiscal 2013.
We believe that our cash and cash equivalents, together with borrowings under our 2014 Credit Facility as described below under the heading “Debt”, will be sufficient to meet our anticipated operating cash needs, debt service, planned capital expenditures, and stock purchases under the stock repurchase program for at least the next twelve months.
We anticipate that planned capital expenditures primarily for continued upgrade of our ERP systems, as well as computer equipment, software, manufacturing tools and test equipment and leasehold improvements associated with business expansion, will constitute a partial use of our cash resources. Decisions related to how much cash is used for investing are influenced by the expected amount of cash to be provided by operations.
Operating Activities
Cash provided by operating activities was $407.1 million for fiscal 2014, as compared to $414.6 million for fiscal 2013. The decrease of $7.6 million was due to an increase in inventory, and to a lesser extent, a decrease in net income before non-cash depreciation and amortization primarily due to decreased operating income in Field Solutions. This was partially offset by an increase in deferred revenue.
Cash provided by operating activities was $414.6 million for fiscal 2013, as compared to $340.7 million for fiscal 2012. The increase of $73.9 million was due to an increase in net income before non-cash depreciation and amortization, primarily attributable to Engineering and Construction and Mobile Solutions segments’ increased operating income, and to a lesser extent, an increase
in deferred revenue and a decrease in accounts receivable attributable to lower DSO. This was partially offset by a decrease in accounts payable due to the timing of payments.
Investing Activities
Cash used in investing activities was $344.0 million for fiscal 2014, as compared to $324.8 million for fiscal 2013. The increase is primarily due to cash used for business and intangible asset acquisitions. Fiscal 2014 acquisitions included Manhattan Software, Amtech and other acquisitions. Fiscal 2013 acquisitions included ALK, Trade Services and other acquisitions.
Cash used in investing activities was $324.8 million for fiscal 2013, as compared to $764.3 million for fiscal 2012, primarily due to cash used for business and intangible asset acquisitions. Fiscal 2013 acquisitions included ALK, Trade Services and other acquisitions. Fiscal 2012 acquisitions included TMW, SketchUp and other acquisitions.
Financing Activities
Cash used by financing activities was $51.5 million for fiscal 2014, as compared to cash used of $98.4 million during fiscal 2013. The decrease of $46.9 million was primarily due to a decrease in debt proceeds, net of repayments, slightly offset by an increase in proceeds received from the issuance of common stock related to stock option exercises and stock repurchase.
Cash used by financing activities was $98.4 million for fiscal 2013, as compared to cash provided of $426.4 million during fiscal 2012. The decrease of $524.8 million was primarily due to a decrease in debt proceeds, net of repayments, slightly offset by an increase in proceeds received from the issuance of common stock related to stock option exercises.
Accounts Receivable and Inventory Metrics
|
| | | | | |
At the End of Fiscal Year | 2014 | | 2013 |
Accounts receivable days sales outstanding | 58 |
| | 55 |
|
Inventory turns per year | 3.9 |
| | 4.1 |
|
Accounts receivable days sales outstanding were up at 58 days at the end of fiscal 2014, as compared to 55 days at the end of fiscal 2013, primarily due to the impact of acquisitions during the year. Our accounts receivable days sales outstanding are calculated based on ending accounts receivable, net, divided by revenue for the fourth fiscal quarter, times a quarterly average of 91 days. Due to fiscal 2013 being a 53-week year, our accounts receivable days sales outstanding for fiscal 2013 is calculated based on ending accounts receivable, net, divided by revenue for the fourth fiscal quarter, times 98 days for the fourth quarter of fiscal 2013. Our inventory turns were 3.9 at the end of fiscal 2014, as compared to 4.1 at the end of fiscal 2013. Our inventory turnover is based on the total cost of sales for the fiscal period over the average inventory for the corresponding fiscal period.
Debt
Notes
On October 30, 2014, we filed a shelf registration statement with the Securities and Exchange Commission (“SEC”) for the issuance of senior debt securities. On November 24, 2014, we issued $400.0 million of Senior Notes (“Notes”) under the shelf registration statement. The Notes mature on December 1, 2024 and accrue interest at a rate of 4.75% per annum, payable semiannually in arrears on December 1 and June 1 of each year, beginning on June 1, 2015. The Notes are classified as long-term in the Consolidated Balance Sheet.
Prior to September 1, 2024, we may redeem the Notes at our option at any time, in whole or in part, at a redemption price equal to the greater of (i) 100% of the aggregate principal amount of the Notes to be redeemed and (ii) the sum of the present values of the remaining scheduled payments of interest and principal, calculated on a semiannual basis using a discount rate equal to the U.S. Treasury rate plus 40 basis points. After September 1, 2024, we may redeem the Notes at our option at any time, in whole or in part, at a redemption price equal to 100% of the aggregate principal amount of the Notes to be redeemed, plus accrued and unpaid interest thereon. In addition, in the event of a change of control, as defined in the prospectus filed with the SEC, each holder of the Notes will have the right to require us to purchase for cash all or a portion of such holder’s Notes at a purchase price equal to 101% of the principal amount of the Notes, plus any accrued and unpaid interest.
In connection with the closing of the Notes offering, we entered into an Indenture with U.S. Bank National Association, as trustee. The Indenture contains covenants limiting our ability to create certain liens, enter into sale and lease-back transactions, and consolidate or merge with or into, or convey, transfer or lease all or substantially all of our properties and assets to, another person, each subject to certain exceptions. The Notes contain no financial covenants. We were in compliance with these covenants at the end of fiscal 2014.
2014 Credit Facility
On November 24, 2014, we entered into a new five-year credit agreement with a group of lenders (the “2014 Credit Facility”), which replaced our previous 2012 Credit Facility. The 2014 Credit Facility provides for an unsecured revolving loan facility of $1.0 billion and a letter of credit sub-facility of up to $50.0 million. Subject to the terms of the 2014 Credit Facility, the revolving loan facility may be increased and/or term loan facilities may be established in an amount up to $500.0 million. The outsanding balance of $277.0 million is classified as long-term in the Consolidated Balance Sheet.
The funds available under the 2014 Credit Facility may be used for working capital and general corporate purposes, the financing of certain acquisitions and the payment of transaction fees and expenses related to such acquisitions. Under the 2014 Credit Facility, we may borrow, repay and reborrow funds under the revolving loan facility until its maturity on November 24, 2019, at which time the revolving facility will terminate, and all outstanding loans, together with all accrued and unpaid interest, must be repaid. Amounts not borrowed under the $1.0 billion revolving facility will be subject to a commitment fee, to be paid in arrears on the last day of each fiscal quarter, ranging from 0.10% to 0.30% per annum depending on either our credit rating at such time or our leverage ratio as of the most recently ended fiscal quarter, whichever results in more favorable pricing to us.
We may borrow funds under the 2014 Credit Facility in U.S. Dollars, Euros or in certain other agreed currencies, and borrowings will bear interest, at our option, at either: (i) a floating per annum base rate determined by reference to the highest of: (a) the administrative agent’s prime rate; (b) 0.50% per annum above the federal funds effective rate; and (c) reserve-adjusted LIBOR for an interest period of one month plus 1.00%, plus a margin of between 0.00% and 0.75%, or (ii) a reserve-adjusted fixed per annum rate based on LIBOR or EURIBOR, depending on the currency borrowed, plus a margin of between 1.00% and 1.75%. The applicable margin in each case is determined based on either Trimble’s credit rating at such time or Trimble’s leverage ratio as of its most recently ended fiscal quarter, whichever results in more favorable pricing to us. Interest is payable on the last day of each fiscal quarter with respect to borrowings bearing interest at the base rate, or on the last day of an interest period, but at least every three months, with respect to borrowings bearing interest at LIBOR or EURIBOR rate.
The 2014 Credit Facility contains various customary representations and warranties by us, which include customary use of materiality, material adverse effect and knowledge qualifiers. The 2014 Credit Facility also contains customary affirmative and negative covenants including, among other requirements, negative covenants that restrict our ability to create liens and enter into sale and leaseback transactions, and that restrict our subsidiaries’ ability to incur indebtedness. Further, the 2014 Credit Facility contains financial covenants that require the maintenance of minimum interest coverage and maximum leverage ratios. Specifically, we must maintain as of the end of each fiscal quarter a ratio of (a) EBITDA (as defined in the 2014 Credit Facility) to (b) interest expense for the most recently ended period of four fiscal quarters of not less than 3.50 to 1.00. We must also maintain, at the end of each fiscal quarter, a ratio of (x) total indebtedness (as defined in the 2014 Credit Facility) to (y) EBITDA (as defined in the 2014 Credit Facility) for the most recently ended period of four fiscal quarters of not greater than 3.00 to 1.00; provided, that on the completion of a material acquisition, we may increase the ratio by 0.50 for the fiscal quarter during which such acquisition occurred and each of the three subsequent fiscal quarters. We were in compliance with these covenants at the end of fiscal 2014.
The 2014 Credit Facility contains events of default that include, among others, non-payment of principal, interest or fees, breach of covenants, inaccuracy of representations and warranties, cross defaults to certain other indebtedness, bankruptcy and insolvency events, material judgments and events constituting a change of control. Upon the occurrence and during the continuance of an event of default, interest on the obligations will accrue at an increased rate in the case of an event of default arising from the nonpayment of principal and the lenders may accelerate our obligations under the 2014 Credit Facility, except that acceleration will be automatic in the case of bankruptcy and insolvency events of default.
The interest rate on the non-current debt outstanding under the credit facilities was 1.42% and 1.67% at the end of fiscal 2014 and 2013, respectively.
Uncommitted Facilities
We also have two $75 million revolving credit facilities which are uncommitted (the “Uncommitted Facilities”). The Uncommitted Facilities may be called by the lenders at any time, have no covenants and no specified expiration date. The interest rate on the Uncommitted Facilities is 1.00% plus either LIBOR or the bank’s cost of funds or as otherwise agreed upon by the bank and us. The $57.0 million outstanding at the end of 2014 and the $85.0 million outstanding at the end of 2013 under the Uncommitted Facilities are classified as short-term in our Consolidated Balance Sheet. The weighted average interest rate on the Uncommitted Facilities was 1.15% at the end of fiscal 2014 and 1.31% at the end of fiscal 2013.
For additional discussion of our debt, see Note 8 of Notes to the Consolidated Financial Statements.
Repatriation of Foreign Earnings and Income Taxes
At the end of fiscal 2014, $128.3 million of cash and cash equivalents was held by our foreign subsidiaries. If these funds are needed for our operations in the U.S., we would not be required to accrue and pay U.S. taxes to repatriate these funds due to intercompany financing arrangements with our foreign subsidiaries. While a significant portion of our foreign earnings continue to be permanently reinvested in our foreign subsidiaries, it is anticipated this reinvestment will not impede cash needs at the parent company level. In our determination of which foreign earnings are permanently reinvested, we consider numerous factors, including the financial requirements of the U.S. parent company, the financial requirements of the foreign subsidiaries, and the tax consequences of remitting the foreign earnings back to the U.S. There are no other material impediments to our ability to access sources of liquidity and our resulting ability to meet short and long-term liquidity needs, other than in the event we are not in compliance with the covenants under our 2014 Credit Facility and Notes or the potential tax costs of remitting foreign earnings back to the U.S.
CONTRACTUAL OBLIGATIONS
The following table summarizes our contractual obligations at the end of fiscal 2014:
|
| | | | | | | | | | | | | | | | | | | |
| Payments Due By Period |
| Total | | Less than 1 year | | 1-3 years | | 3-5 years | | More than 5 years |
(in thousands) | | | | | | | | | |
Principal payments on debt (1) | $ | 741,431 |
| | $ | 64,431 |
| | $ | — |
| | $ | 277,000 |
| | $ | 400,000 |
|
Interest payments on debt (2) | 199,999 |
| | 23,260 |
| | 42,068 |
| | 57,827 |
| | 76,844 |
|
Operating leases | 136,747 |
| | 33,149 |
| | 41,879 |
| | 25,975 |
| | 35,744 |
|
Other purchase obligations and commitments (3) | 125,333 |
| | 119,836 |
| | 5,497 |
| | — |
| | — |
|
Total | $ | 1,203,510 |
| | $ | 240,676 |
| | $ | 89,444 |
| | $ | 360,802 |
| | $ | 512,588 |
|
| |
(1) | Amount represents principal payments over the life of the debt obligations. (See Note 8 of the Notes to the Consolidated Financial Statements for further financial information regarding debt.) |
| |
(2) | Amount represents the expected interest cash payments relating to our debt. Interest was estimated interest payments that are not recorded on our Consolidated Balance Sheets. Interest was 4.75% for our $400.0 million Notes and was estimated to be 1.3% per annum for our credit facilities, based upon recent trends, and is not included in our Consolidated Balance Sheets. |
| |
(3) | Other purchase obligations and commitments primarily represent open non-cancelable purchase orders for material purchases with our vendors, and also include estimated payments due for acquisition related earn-outs and holdbacks. Purchase obligations exclude agreements that are cancelable without penalty. |
At the end of fiscal 2014 we had unrecognized tax benefits (included in Other non-current liabilities) of $43.6 million, including interest and penalties. At this time, we cannot make a reasonably reliable estimate of the period of cash settlement with tax authorities regarding this liability, and therefore, such amounts are not included in the contractual obligations table above.
EFFECT OF NEW ACCOUNTING PRONOUNCEMENTS
The impact of recent accounting pronouncements is disclosed in Note 2 of the Notes to Consolidated Financial Statements.
RECONCILIATION OF GAAP TO NON-GAAP FINANCIAL MEASURES
Our non-GAAP measures are not meant to be considered in isolation or as a substitute for comparable GAAP measures. The non-GAAP financial measures included in the following tables as well as detailed explanations to the adjustments to comparable GAAP measures, are set forth below:
Non-GAAP gross margin
We believe our investors benefit by understanding our non-GAAP gross margin as a way of understanding how product mix, pricing decisions and manufacturing costs influence our business. Non-GAAP gross margin excludes restructuring costs, amortization of purchased intangible assets, stock-based compensation and amortization of acquisition-related inventory step-up from GAAP gross margin. We believe that these exclusions offer investors additional information that may be useful to view trends in our gross margin performance.
Non-GAAP operating expenses
We believe this measure is important to investors evaluating our non-GAAP spending in relation to revenue. Non-GAAP operating expenses exclude restructuring costs, amortization of purchased intangible assets, stock-based compensation, acquisition/divestiture costs associated with external and incremental costs resulting directly from merger and acquisition activities such as legal, due diligence, and integration costs from GAAP operating expenses, and litigation expenses. We believe that these exclusions offer investors supplemental information to facilitate comparison of our operating expenses to our prior results.
Non-GAAP operating income
We believe our investors benefit by understanding our non-GAAP operating income trends which are driven by revenue, gross margin, and spending. Non-GAAP operating income excludes restructuring costs, amortization of purchased intangible assets, stock-based compensation, amortization of acquisition-related inventory step-up, acquisition/divestiture costs associated with external and incremental costs resulting directly from merger and acquisition activities such as legal, due diligence, integration costs and acquisition bonus payments, and litigation expenses. We believe that these exclusions offer an alternative means for our investors to evaluate current operating performance compared to results of other periods.
Non-GAAP non-operating income, net
We believe this measure helps investors evaluate our non-operating income trends. Non-GAAP non-operating income, net excludes acquisition and divestiture gains/losses associated with unusual acquisition related items such as adjustments to the fair value of earn-out liabilities, intangible asset impairment charges and gains or losses related to the acquisition or sale of certain businesses and investments, and a gain on an equity sale. These gains/losses are specific to particular acquisitions and divestitures and vary significantly in amount and timing. Non-GAAP non-operating income, net also excludes the write-off of debt issuance costs as well as a foreign exchange loss associated with hedges for one of our acquisitions. We believe that these exclusions provide investors with a supplemental view of our ongoing financial results.
Non-GAAP income tax provision
Non-GAAP items tax effected adjusts the provision for income taxes to reflect the effect of certain non-GAAP items on non-GAAP net income. We believe this information is useful to investors because it provides for consistent treatment of the excluded items in our non-GAAP presentation.
Non-GAAP net income
This measure provides a supplemental view of net income trends which are driven by non-GAAP income before taxes and our non-GAAP tax rate. Non-GAAP net income excludes restructuring costs, amortization of purchased intangible assets, stock-based compensation, amortization of acquisition-related inventory step-up, acquisition and divestiture costs, a gain on an equity sale, a write off of debt issuance costs, a foreign exchange loss from hedges associated with one of our acquisitions, litigation, and non-GAAP tax adjustments from GAAP net income. We believe our investors benefit from understanding these exclusions and from an alternative view of our net income performance as compared to our past net income performance.
Non-GAAP diluted net income per share
We believe our investors benefit by understanding our non-GAAP operating performance as reflected in a per share calculation as a way of measuring non-GAAP operating performance by ownership in the company. Non-GAAP diluted net income per share excludes restructuring costs, amortization of purchased intangible assets, stock-based compensation, amortization of acquisition-related inventory step-up, acquisition and divestiture costs, a gain on an equity sale, a write off of debt issuance costs, a foreign exchange loss from hedges associated with one of our acquisitions, litigation and non-GAAP tax adjustments from GAAP diluted net income per share. We believe that these exclusions offer investors a useful view of our diluted net income per share as compared to our past diluted net income per share.
Non-GAAP operating leverage
We believe this information is beneficial to investors as a measure of how much incremental revenue contributed to our operating income. Non-GAAP operating leverage is the increase in non-GAAP operating income as a percentage of the increase in revenue. We believe that this information offers investors supplemental information to evaluate our current performance and to compare to our past non-GAAP operating leverage.
Non-GAAP segment operating income
Non-GAAP segment operating income excludes stock-based compensation from GAAP segment operating income. We believe this information is useful to investors because some may exclude stock-based compensation as an alternative view when assessing trends in the operating income of our segments.
These non-GAAP measures can be used to evaluate our historical and prospective financial performance, as well as our performance relative to competitors. We believe some of our investors track our ""core operating performance"" as a means of evaluating our performance in the ordinary, ongoing, and customary course of our operations. Core operating performance excludes items that are non-cash, not expected to recur or not reflective of ongoing financial results. Management also believes that looking at our core operating performance provides a supplemental way to provide consistency in period to period comparisons. Accordingly, management excludes from non-GAAP those items relating to restructuring, amortization of purchased intangible assets, stock based compensation, amortization of acquisition-related inventory step-up, acquisition and divestiture costs, a gain on an equity sale, a write off of debt issuance costs, a foreign exchange loss from hedges associated with one of our acquisitions, litigation, and non-GAAP tax adjustments. For detailed explanations of the adjustments made to comparable GAAP measures, see items (A) - ( M) below,
|
| | | | | | | | | | | | | | | | | | | | | |
| | Fiscal Years |
| | 2014 | | 2013 | | 2012 |
(Dollars in thousands, except per share data) | | Dollar Amount | | % of Revenue | | Dollar Amount | | % of Revenue | | Dollar Amount | | % of Revenue |
GROSS MARGIN: | | | | | | | | | | | | |
GAAP gross margin: | | $ | 1,290,844 |
| | 53.9 | % | | $ | 1,203,822 |
| | 52.6 | % | | $ | 1,046,177 |
| | 51.3 | % |
Restructuring | ( A ) | 363 |
| | — | % | | 860 |
| | — | % | | 156 |
| | — | % |
Amortization of purchased intangible assets | ( B ) | 82,913 |
| | 3.5 | % | | 81,119 |
| | 3.6 | % | | 60,277 |
| | 3.0 | % |
Stock-based compensation | ( C ) | 3,184 |
| | 0.1 | % | | 2,573 |
| | 0.1 | % | | 2,005 |
| | 0.1 | % |
Amortization of acquisition-related inventory step-up | ( D ) | 816 |
| | — | % | | 1,505 |
| | 0.1 | % | | 2,357 |
| | 0.1 | % |
Non-GAAP gross margin: | | $ | 1,378,120 |
| | 57.5 | % | | $ | 1,289,879 |
| | 56.4 | % | | $ | 1,110,972 |
| | 54.5 | % |
OPERATING EXPENSES: | | | | | | | | | | | | |
GAAP operating expenses: | | $ | 1,030,021 |
| | 43.0 | % | | $ | 952,085 |
| | 41.6 | % | | $ | 833,609 |
| | 40.9 | % |
Restructuring | ( A ) | (1,741 | ) | | (0.1 | )% | | (5,960 | ) | | (0.3 | )% | | (2,227 | ) | | (0.1 | )% |
Amortization of purchased intangible assets | ( B ) | (75,599 | ) | | (3.1 | )% | | (81,722 | ) | | (3.5 | )% | | (65,430 | ) | | (3.2 | )% |
Stock-based compensation | ( C ) | (40,214 | ) | | (1.7 | )% | | (33,869 | ) | | (1.4 | )% | | (30,655 | ) | | (1.5 | )% |
Acquisition / divestiture items | ( E ) | (13,449 | ) | | (0.6 | )% | | (13,195 | ) | | (0.6 | )% | | (21,662 | ) | | (1.1 | )% |
Litigation | ( I ) | (711 | ) | | — | % | | (1,335 | ) | | (0.1 | )% | | — |
| | — | % |
Non-GAAP operating expenses: | | $ | 898,307 |
| | 37.5 | % | | $ | 816,004 |
| | 35.7 | % | | $ | 713,635 |
| | 35.0 | % |
OPERATING INCOME: | | | | | | | | | | | | |
GAAP operating income: | | $ | 260,823 |
| | 10.9 | % | | $ | 251,737 |
| | 11.0 | % | | $ | 212,568 |
| | 10.4 | % |
Restructuring | ( A ) | 2,104 |
| | 0.1 | % | | 6,820 |
| | 0.3 | % | | 2,383 |
| | 0.1 | % |
Amortization of purchased intangible assets | ( B ) | 158,512 |
| | 6.6 | % | | 162,841 |
| | 7.1 | % | | 125,707 |
| | 6.2 | % |
Stock-based compensation | ( C ) | 43,398 |
| | 1.8 | % | | 36,442 |
| | 1.5 | % | | 32,660 |
| | 1.6 | % |
Amortization of acquisition-related inventory step-up | ( D ) | 816 |
| | — | % | | 1,505 |
| | 0.1 | % | | 2,357 |
| | 0.1 | % |
Acquisition / divestiture items | ( E ) | 13,449 |
| | 0.6 | % | | 13,195 |
| | 0.6 | % | | 21,662 |
| | 1.1 | % |
Litigation | ( I ) | 711 |
| | — | % | | 1,335 |
| | 0.1 | % | | — |
| | — | % |
Non-GAAP operating income: | | $ | 479,813 |
| | 20.0 | % | | $ | 473,875 |
| | 20.7 | % | | $ | 397,337 |
| | 19.5 | % |
NON-OPERATING INCOME, NET: | | | | | | | | | | | | |
GAAP non-operating income, net: | | $ | 5,192 |
| | | | $ | 1,127 |
| | | | $ | 16,856 |
| | |
Acquisition / divestiture items | ( E ) | 2,899 |
| | | | 1,430 |
| | | | (7,257 | ) | | |
Gain on an equity sale | ( F ) | (15,091 | ) | | | | — |
| | | | — |
| | |
Debt issuance cost write-off | ( G ) | 4,205 |
| | | | — |
| | | | 82 |
| | |
Foreign exchange loss associated with acquisition | ( H ) | — |
| | | | — |
| | | | 1,578 |
| | |
|
| | | | | | | | | | | | | | | | | | | | | |
Non-GAAP non-operating income, net: | | $ | (2,795 | ) | | | | $ | 2,557 |
| | | | $ | 11,259 |
| | |
| | | | | | | | | | | | |
| | | | GAAP and Non-GAAP Tax Rate % (L) | | | | GAAP and Non-GAAP Tax Rate % (L) | | | | GAAP and Non-GAAP Tax Rate % (L) |
INCOME TAX PROVISION: | | | | | | | | | | | | |
GAAP income tax provision: | | $ | 52,127 |
| | 20 | % | | $ | 34,698 |
| | 14 | % | | $ | 39,708 |
| | 17 | % |
Non-GAAP items tax effected: | (J) | 44,342 |
| | | | 30,064 |
| | | | 30,635 |
| | |
Tax on gain on an equity sale | (K) | (5,836 | ) | | | | — |
| | | | — |
| | |
Non-GAAP income tax provision: | | $ | 90,633 |
| | 19 | % | | $ | 64,762 |
| | 14 | % | | $ | 70,343 |
| | 17 | % |
NET INCOME: | | | | | | | | | | | | |
GAAP net income attributable to Trimble Navigation Ltd. | | $ | 214,118 |
| | | | $ | 218,855 |
| | | | $ | 191,060 |
| | |
Restructuring | ( A ) | 2,104 |
| | | | 6,820 |
| | | | 2,383 |
| | |
Amortization of purchased intangible assets | ( B ) | 158,512 |
| | | | 162,841 |
| | | | 125,707 |
| | |
Stock-based compensation | ( C ) | 43,398 |
| | | | 36,442 |
| | | | 32,660 |
| | |
Amortization of acquisition-related inventory step-up | ( D ) | 816 |
| | | | 1,505 |
| | | | 2,357 |
| | |
Acquisition / divestiture items | ( E ) | 16,348 |
| | | | 14,625 |
| | | | 14,405 |
| | |
Gain on an equity sale | ( F ) | (15,091 | ) | | | | — |
| | | | — |
| | |
Debt issuance cost write-off | ( G ) | 4,205 |
| | | | — |
| | | | 82 |
| | |
Foreign exchange loss associated with acquisition | ( H ) | — |
| | | | — |
| | | | 1,578 |
| | |
Litigation | ( I ) | 711 |
| | | | 1,335 |
| | | | — |
| | |
Non-GAAP items tax affected | ((J), (K) | (38,506 | ) | | | | (30,064 | ) | | | | (30,635 | ) | | |
Non-GAAP net income attributable to Trimble Navigation Ltd. | | $ | 386,615 |
| | | | $ | 412,359 |
| | | | $ | 339,597 |
| | |
DILUTED NET INCOME PER SHARE: | | | | | | | | | | | | |
GAAP diluted net income per share attributable to Trimble Navigation Ltd. | | $ | 0.81 |
| | | | $ | 0.84 |
| | | | $ | 0.74 |
| |
|
Restructuring | (A) | 0.01 |
| | | | 0.03 |
| | | | 0.01 |
| |
|
Amortization of purchased intangible assets | (B) | 0.60 |
| | | | 0.62 |
| | | | 0.49 |
| |
|
Stock-based compensation | (C) | 0.16 |
| | | | 0.14 |
| | | | 0.13 |
| |
|
Amortization of acquisition-related inventory step-up | (D) | — |
| | | | — |
| | | | 0.01 |
| |
|
Acquisition / divestiture items | (E) | 0.06 |
| | | | 0.06 |
| | | | 0.05 |
| |
|
Gain on an equity sale | ( F ) | (0.06 | ) | | | | — |
| | | | — |
| | |
Debt issuance cost write-off | ( G ) | 0.02 |
| | | | — |
| | | | — |
| |
|
Foreign exchange loss associated with acquisition | (H) | — |
| | | | — |
| | | | 0.01 |
| |
|
Litigation | ( I) | — |
| | | | 0.01 |
| | | | — |
| |
|
Non-GAAP items tax affected | (J), (K) | (0.14 | ) | | | | (0.12 | ) | | | | (0.12 | ) | |
|
Non-GAAP diluted net income per share attributable to Trimble Navigation Ltd. | | $ | 1.46 |
| | | | $ | 1.58 |
| | | | $ | 1.32 |
| |
|
OPERATING LEVERAGE: | | | | | | | | | | | | |
Increase in non-GAAP operating income | | $ | 5,938 |
| | | | $ | 76,538 |
| | | | $ | 105,134 |
| | |
Increase in revenue | | $ | 107,422 |
| | | | $ | 248,011 |
| | | | $ | 396,048 |
| | |
Operating leverage (increase in non-GAAP operating income as a % of increase in revenue) | | 5.5 | % | | | | 30.9 | % | | | | 26.5 | % | | |
|
| | | | | | | | | | | | | | | | | | | | | |
| | Fiscal Years |
| | 2014 | | 2013 | | 2012 |
(Dollars in thousands) | | | | % of Segment Revenue | | | | % of Segment Revenue | | | | % of Segment Revenue |
SEGMENT OPERATING INCOME: | | | | | | | | | | | | |
Engineering and Construction | | | | | | | | | | | | |
GAAP operating income before corporate allocations: | | $ | 268,856 |
| | 19.9 | % | | $ | 251,258 |
| | 20.6 | % | | $ | 207,174 |
| | 19.0 | % |
Stock-based compensation | (M) | 15,244 |
| | 1.2 | % | | 12,325 |
| | 1.0 | % | | 11,954 |
| | 1.1 | % |
Non-GAAP operating income before corporate allocations: | | $ | 284,100 |
| | 21.1 | % | | $ | 263,583 |
| | 21.6 | % | | $ | 219,128 |
| | 20.1 | % |
Field Solutions | | | | | | | | | | | | |
GAAP operating income before corporate allocations: | | $ | 134,198 |
| | 31.8 | % | | $ | 173,114 |
| | 36.5 | % | | $ | 182,134 |
| | 37.8 | % |
Stock-based compensation | (M) | 3,554 |
| | 0.8 | % | | 3,068 |
| | 0.7 | % | | 2,750 |
| | 0.6 | % |
Non-GAAP operating income before corporate allocations: | | $ | 137,752 |
| | 32.6 | % | | $ | 176,182 |
| | 37.2 | % | | $ | 184,884 |
| | 38.4 | % |
Mobile Solutions | | | | | | | | | | | | |
GAAP operating income before corporate allocations: | | $ | 72,876 |
| | 15.0 | % | | $ | 63,961 |
| | 13.8 | % | | $ | 32,459 |
| | 9.3 | % |
Stock-based compensation | |