AVID-12.31.2014-10K


UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
_______________________
FORM 10-K
 
(Mark One)
 
 
 
x
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
 
 
FOR THE FISCAL YEAR ENDED DECEMBER 31, 2014
 
 
OR
 
 
¨
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
 
 
FOR THE TRANSITION PERIOD FROM __________ TO __________
 
Commission File Number:  1-36254
_______________________
Avid Technology, Inc.
(Exact Name of Registrant as Specified in Its Charter)
 
Delaware
(State or Other Jurisdiction of
Incorporation or Organization)
 
04-2977748
(I.R.S. Employer
Identification No.)
 
75 Network Drive
Burlington, Massachusetts  01803
(Address of Principal Executive Offices, Including Zip Code)
 
(978) 640-6789
(Registrant’s Telephone Number, Including Area Code)
Securities Registered Pursuant to Section 12(b) of the Act: None

Securities Registered Pursuant to Section 12(g) of the Act:
Title of Each Class
Common Stock, $.01 Par Value
_______________________
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  Yes ¨   No x
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.  Yes ¨   No x
Indicate by check mark whether the registrant:  (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports) and (2) has been subject to such filing requirements for the past 90 days.  Yes x   No ¨
Indicate by check mark whether the registrant has submitted and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).  Yes x   No ¨
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. x
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.
 
Large Accelerated Filer ¨
Non-accelerated Filer ¨
(Do not check if smaller reporting company)
 
Accelerated Filer x
Smaller Reporting Company ¨
 
 
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).  Yes £   No S
The aggregate market value of the voting stock held by non-affiliates of the registrant was approximately $287,833,000 based on the closing price of the Common Stock as quoted on the OTC Pink Tier on June 30, 2014.  The number of shares outstanding of the registrant’s Common Stock as of March 13, 2015 was 39,466,054.
 
DOCUMENTS INCORPORATED BY REFERENCE
 
 
Document Description
 
10-K Part
 
 
Portions of the Registrant’s Proxy Statement for the 2015 Annual Meeting of Stockholders
 
III
 




AVID TECHNOLOGY, INC.
FORM 10-K
FOR THE FISCAL YEAR ENDED DECEMBER 31, 2014

TABLE OF CONTENTS
 
Page
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

ii



CAUTIONARY NOTE ON FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K, or Form 10-K, filed by Avid Technology, Inc. (together with its consolidated subsidiaries, “Avid” or the “Company”, or “we”, “us” or “our” unless the context indicates otherwise includes forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. For this purpose, any statements contained in this Form 10-K that relate to future results or events are forward-looking statements. Forward-looking statements may be identified by use of forward-looking words, such as “anticipate,” “believe,” “confidence,” “could,” “estimate,” “expect,” “feel,” “intend,” “may,” “plan,” “should,” “seek,” “will” and “would,” or similar expressions.

Forward-looking statements may involve subjects relating to the following:
the development, marketing and selling of new products and services;
our ability to successfully implement our Avid Everywhere strategic plan and other strategic initiatives, including our cost saving strategies;
anticipated trends relating to our sales, financial condition or results of operations;
our goal of expanding our market positions;
the anticipated performance of our products;
our business strategies and market positioning;
our ability to successfully consummate any potential acquisitions or investment transactions and successfully integrate acquired business into our operations;
the anticipated trends and development of our markets and the success of our products in these markets;
our ability to mitigate and remediate effectively the material weaknesses in our internal control over financial reporting;
the risk of restatement of our financial statements;
our capital resources and the adequacy thereof;
the impact, costs and expenses of any litigation or government inquiries we may be subject to now or in the future;
the effect of the continuing worldwide macroeconomic uncertainty on our business and results of operation;
the expected timing of recognition of revenue backlog as revenue;
estimated asset and liability values and amortization of our intangible assets;
our compliance with covenants contained in our indebtedness;
changes in inventory levels;
seasonal factors;
plans regarding repatriation of foreign earnings;
transactions in and valuations of investments and derivative instruments; and
fluctuations in foreign exchange and interest rates.
 
Actual results and events in future periods may differ materially from those expressed or implied by these forward-looking statements in this report. There are a number of factors that could cause actual events or results to differ materially from those indicated or implied by forward-looking statements, many of which are beyond our control, including the risk factors discussed in Item 1A of this Form 10-K. In addition, the forward-looking statements contained in this Form 10-K represent our estimates only as of the date of this filing and should not be relied upon as representing our estimates as of any subsequent date. While we may elect to update these forward-looking statements at some point in the future, we specifically disclaim any obligation to do so, whether to reflect actual results, changes in assumptions, changes in other factors affecting such forward-looking statements or otherwise.


iii



The information included under the heading “Stock Performance Graph” in Item 5 of this Form 10-K is “furnished” and not “filed” and shall not be deemed to be “soliciting material” or subject to Regulation 14A, shall not be deemed “filed” for purposes of Section 18 of the Securities Exchange Act of 1934, as amended, or the Exchange Act, or otherwise subject to the liabilities of that section, nor shall it be deemed incorporated by reference in any filing under the Exchange Act or the Securities Act of 1933, as amended, or the Securities Act, except to the extent that we specifically incorporate it by reference.

We own or have rights to trademarks and service marks that we use in connection with the operation of our business.  Avid is a trademark of Avid Technology, Inc.  Other trademarks, logos, and slogans registered or used by us and our subsidiaries in the United States and other countries include, but are not limited to, the following:  Avid Everywhere, Avid Motion Graphics, AirSpeed, EUCON, Fast Track, iNEWS, Interplay, ISIS, Avid MediaCentral Platform, Mbox, Media Composer, NewsCutter, Nitris, Pro Tools, Sibelius and Symphony.  Other trademarks appearing in this Form 10-K are the property of their respective owners.



iv



PART I

ITEM 1.
BUSINESS

OVERVIEW

We provide an open, integrated, and comprehensive technology platform, along with applications and services that enable the creation, distribution, and monetization of audio and video content. Specifically, we develop, market, sell, and support software and hardware for digital media content production, management, secured content storage and distribution. Digital media are video, audio or graphic elements in which the image, sound or picture is recorded and stored as digital values, as opposed to analog or tape-based signals. Our products are used in production and post-production facilities; film studios; network, affiliate, independent and cable television stations; recording studios; live-sound performance venues; advertising agencies; government and educational institutions; corporate communication departments; and by independent video and audio creative professionals, as well as aspiring professionals and enthusiasts. Projects produced using our products include feature films, television programs, live events, news programs, commercials, music, video and other recordings.

Our mission is to create the most powerful and collaborative media network that enables the creation, distribution and monetization of the most inspiring content in the world. Guided by our Avid Everywhere strategic vision, we strive to deliver the industry’s most open, innovative and comprehensive media platform connecting content creation with collaboration, asset protection, distribution and consumption for the media in the world – from the most prestigious and award-winning feature films, music recordings, and television shows, to live concerts and news broadcasts. We have been honored over time for our technological innovation with 14 Emmy Awards, one Grammy Award, two Oscar statuettes and the first ever America Cinema Editors Technical Excellence Award.  Our solutions were used in all 2015 Oscar nominated films for Best Picture, Best Editing, Best Sound Editing and Best Sound Mixing.

CORPORATE STRATEGY

Technology has enabled almost every aspect of how we live to become increasingly digitized, and acceleration of digitization is having a tremendous impact on the media industry and altering the industry value chain. Today’s consumers are empowered to create and consume content on-demand-anywhere, anytime. Organizations are under pressure to connect and automate the entire creation-to-consumption workflow. This consumerization has increased the cost and complexity of monetizing assets, which in turn leads to demand for new platforms for distribution and consumption. Organizations need to rely on partners with the strategic understanding and technological expertise to help navigate the challenges they are facing. We believe we are uniquely positioned as a proven and trusted leader to effectively help the media industry navigate through this period of unprecedented changes.

Our strategy is built on three pillars, Avid Everywhere, The Avid Advantage and the Avid Customer Association. Avid Everywhere, introduced in April 2013, is our strategic vision for connecting creative professionals and media organizations with their audiences in a more powerful, efficient, collaborative, and profitable way. Central to the Avid Everywhere vision is the Avid MediaCentral Platform, an open, extensible, and customizable foundation that streamlines and simplifies workflows by tightly integrating all Avid or third party products and services that run on top of it. The platform provides secure and protected access, which enables the creation and delivery of content faster and easier through a set of modular application suites that together represent an open, integrated, and flexible media production and distribution environment for the media industry. The Avid Advantage complements Avid Everywhere by offering a new standard in service, support and education to enable our customers to derive more efficiency from their Avid investment. Finally, the Avid Customer Association, or ACA, created in September 2013, is an association run for and by a dedicated group of media community visionaries, thought leaders and users. The ACA is designed to provide essential strategic leadership to the media industry, facilitate collaboration between Avid and key industry leaders and visionaries, and deepen relationships between our customers and us. With a 51% increase in members in the past year, the ACA is fast becoming a powerful platform for the media industry.

We have organized our existing hardware and software products and introduced new solutions in three suites, all built upon the MediaCentral Platform. These three suites encompass both audio and video products and solutions and are summarized below:
Artist Suite encompasses all of our products and tools used to create content, including video editing solutions, digital audio workstations (DAW), music notation software, control surfaces and live sound systems. Products and tools in the

1



Artist Suite can be deployed on premise, cloud-enabled, or through a hybrid approach. Users can collaborate to access, edit, and share the same media; and collaborate with others as if they were all in the same facility.
Media Suite includes all of our tools and services used to manage, protect, distribute, and monetize media, including solutions for newsroom management, asset management, and multiplatform distribution. We are also expanding the Media Suite to include metadata tagging, protection and encryption, and analytics.
Storage Suite refers to all of our products and tools used to capture, store, and deliver media, including online storage, nearline storage, and ingest/playout servers. These products and tools work in close concert with the Media Suite’s tagging and asset management.

CUSTOMER MARKETS

We provide digital media content-creation, management and distribution products and solutions to customers in the following markets:

Broadcast and Media.  This market consists of broadcast, government, sports and other organizations that acquire, create, process, and/or distribute audio and video content to a large audience for communication, entertainment, analysis, and/or forensic purposes. Customers in this industry rely on workflows that span content acquisition, creation, editing, distribution, sales and redistribution and utilize all content distribution platforms, including web, mobile, internet protocol television, cable, satellite, on-air and various other proprietary platforms. For this market, we offer a range of open products and solutions including hardware- and software-based video- and audio-editing tools, collaborative workflow and asset management solutions, and automation tools, as well as scalable media storage options. Our domain expertise also allows us to provide customers in this market with a range of professional and consulting services. We sell into this market through our direct sales force and resellers.

Video and Audio Post and Professional.  This market is made up of individual artists and entities that create audio and video media as a paid service, but do not currently distribute media to end consumers on a large scale. This industry spans a wide-ranging target audience that includes: independent video editors, facilities and filmmakers that produce video media as a business but are not broadcasters; professional sound designers, editors and mixers and facilities that specialize in the creation of audio for picture; songwriters, musicians, producers, film composers and engineers who compose and record music professionally; technicians, engineers, rental companies and facilities that present, record and broadcast audio and video for live performances; and students and teachers in career technical education programs in high schools, colleges and universities, as well as in post-secondary vocational schools, that prepare students for professional media production careers in the digital workplace. For this market, we offer a range of products and solutions based on the Avid MediaCentral Platform, including hardware- and software-based creative production tools, scalable media storage options and collaborative workflows. Our domain expertise also allows us to provide customers in this market with a broad range of professional services. We sell into this market through storefront and on-line retailers, as well as through our direct sales force and resellers.

PRODUCTS AND SERVICES

Overview

In April 2014, guided by Avid Everywhere, our strategic vision for the media and entertainment industry, we launched the Avid MediaCentral Platform, a set of modular application suites, and new private and public marketplaces that together will represent an open, integrated and flexible media production and distribution environment in the industry. With on-premises and cloud-enabled deployment options, as well as subscription, floating and perpetual licensing options, customers have more choice over how they use Avid solutions.

In July 2012, as a result of a strategic review of our business and the markets we serve, we divested our consumer-focused product lines. The divestiture has enabled us to focus on our core business as a provider of video and audio content creation, distribution and monetization solutions for the professional markets.


2



The following table presents our net revenues from continuing operations, which includes the amortization of deferred revenues but excludes the revenues from our consumer business divested in 2012, for the periods indicated (in thousands):
 
Year Ended December 31,
 
2014
 
2013
 
2012
Video products and solutions
$
233,464

 
$
243,173

 
$
276,909

Audio products and solutions
145,163

 
152,358

 
201,921

     Total products and solutions
378,627

 
395,531

 
478,830

Services
151,624

 
167,881

 
156,873

Total net revenues
$
530,251

 
$
563,412

 
$
635,703


The following table presents our net revenues from continuing operations, which includes the amortization of deferred revenues but excludes the revenues from our consumer business divested in 2012, by type as a percentage of total net revenues from continuing operations for the periods indicated:
 
Year Ended December 31,
 
2014
 
2013
 
2012
Video products and solutions
44
%
 
43
%
 
43
%
Audio products and solutions
27
%
 
27
%
 
32
%
     Total products and solutions
71
%
 
70
%
 
75
%
Services
29
%
 
30
%
 
25
%
Total net revenues
100
%
 
100
%
 
100
%

Video Products and Solutions

Professional Video Creative Tools

We offer a range of software and hardware video-editing tools for the professional. Our award-winning Media Composer product line is used to edit video content, including television programming, commercials and films, while our NewsCutter option and iNews systems are designed for the fast-paced world of news production. Our Avid Symphony option is used during the “online” or “finishing” stage of post-production, during which the final program is assembled in high resolution with finished graphics, visual effects, color grading and audio tracks. Our Media Composer | Cloud solution (formerly Interplay Sphere) enables broadcast news professionals to acquire, access, edit and finish stories anytime, from everywhere. Leveraging a cloud-based architecture, this solution gives contributors the ability to craft stories where they are happening and speed them to air while maintaining connectivity with the newsroom operation. In May 2014, we released Media Composer version 8 with subscription offerings and updates, and in December 2014 we released a new version with resolution flexibility and independence, which allows users to manage and edit high-resolution media content with ease. These new versions are designed to extend the production capabilities of these solutions and demonstrates our continuing commitment to provide tools that allow for improved creativity and productivity of the professional editor, delivered in a way most attractive to the user.

Revenues from our professional video creative tools accounted for approximately 8%, 10% and 12% of our net revenues from continuing operations for 2014, 2013 and 2012, respectively.

Media Management Solutions

Our Avid MediaCentral | UX (formerly Interplay Central) web and mobile-based apps extend the capability of our Avid Interplay | MAM and Avid Interplay | Production asset management solutions by providing real-time access to media assets for the on-the-go media professional. Avid Interplay | MAM allows users to focus on managing content and workflows by giving them the tools to connect their media operations and business intelligence, control movement of media between various storage systems, configure metadata, and leverage a service-oriented architecture structure to integrate in-house and third-party applications. Avid Interplay | Production enhances production team collaboration by coordinating the collaborative editorial workflow of team members at each site, many of whom may be working on the same projects at the same time. Avid Interplay | Production also manages the detailed composition of a project and provides the ability to track media, production file formats, and a project’s history.

3




Revenues from media management solutions accounted for approximately 9%, 8% and 8% of our net revenues from continuing operations in 2014, 2013 and 2012, respectively.

Video Storage and Server Solutions

Our Avid ISIS 5500 and ISIS 7500 shared storage systems are real-time, open solutions that bring the power of shared storage to local, regional, national and multinational broadcasters and post-production facilities at competitive prices. Customers can improve allocation of creative resources and support changing project needs with an open shared storage platform that includes the ISIS file system technology on lower cost hardware, support for third-party applications and streamlined administration to create more content more affordably. In April 2014, we introduced ISIS 2500 as a near-line storage solution with common off-the-shelf storage with an application layer that provides secure storage and allows customers to extend their library of accessible media assets. Our on-air server solutions include AirSpeed 5000 and AirSpeed 5500, which enable broadcasters to automate the ingest and playout of television and news programming.  The AirSpeed 5000 and 5500 video servers work with a wide range of applications to improve workflow and provide cost-efficient ingest and play to air capabilities for broadcasters of any size.

Revenues from video storage and server solutions accounted for approximately 25%, 24% and 24% of our net revenues from continuing operations in 2014, 2013 and 2012, respectively.

Audio Products and Solutions

Digital Audio Software and Workstation Solutions

Our Pro Tools digital audio software and workstation solutions facilitate the audio production process, including music and sound creation, recording, editing, signal processing, integrated surround mixing and mastering, and reference video playback. The Pro Tools platform supports a wide variety of internally developed and third-party software plug-ins and integrated hardware. Pro Tools solutions are offered at a range of price points and are used by professionals and aspiring professionals in music, film, television, radio, game, Internet and other media production environments. In June 2013, we released Pro Tools version 11 featuring a fully redesigned audio engine and 64-bit architecture. In January 2015, we announced Pro Tools version 12 with subscription offerings and new features and updates, including the ability to collaborate over the cloud, as well as Pro Tools | First, which will allow beginners to access the same music creation tools used by professionals.

Our Pro Tools HD family of digital audio workstations, designed to provide high performance, low latency, and great sound quality, provides music production professionals with two powerful solutions, the Pro Tools | HD Native system and the Pro Tools | HDX system. Our Pro Tools | HDX workstation represents a new generation of Pro Tools HD solutions by providing more power, higher audio quality, and easier ways to record, edit and mix demanding audio productions. The most recent addition to our Pro Tools | HD workstation family, the Pro Tools | HD Native Thunderbolt, uses a high-speed Thunderbolt interface to connect to a laptop or desktop computer to eliminate monitor latency while recording.

Our audio recording interfaces are designed to deliver high audio quality plus hands-on controls giving musicians the tools to produce quality recordings in less time. In September 2014, Avid partnered with US based Apogee Electronics Corp. and introduced two new audio recording interfaces: The Pro Tools | Duet and Pro Tools | Quartet, comprised of Apogee audio interfaces and Pro Tools software to provide fully EUCON integrated solutions for musicians and audio engineers.

Revenues from digital audio software and workstation solutions accounted for approximately 16%, 16% and 20% of our net revenues from continuing operations in 2014, 2013 and 2012, respectively.

Control Surfaces, Consoles and Live-Sound Systems

We offer a range of complementary control surfaces and consoles, leveraging the open industry standard protocol EUCON (Extended User Control) to provide open solutions that meet the needs of customers ranging from the independent professional to the high-end broadcaster. Our System 5 digital audio console is a large-format, scalable console with power on demand to mix large feature films or album projects. The addition of our EUCON Hybrid option extends the control capabilities of a System 5 console, enabling the user to bring audio tracks from multiple digital audio workstations onto the console surface for mixing. In September 2013, we introduced our Pro Tools | S6 control surface for sound recording, mixing and editing, which was designed as a state-of-the-art modular solution that scales to meet both current and future customer requirements. S6 is designed for audio professionals in demanding production environments, delivering the performance needed to complete projects faster while

4



producing high quality mixes. Our Artist Series control surfaces offer integrated, hands-on control for price-sensitive applications. Compact and portable, all control surfaces in the Artist line feature EUCON, allowing hands-on control of the user’s applications.

Our VENUE product family includes console systems for mixing audio for live sound reinforcement for concerts, theater performances and other public address events. We offer a range of VENUE systems designed for large performance settings, such as stadium concerts, as well as medium-sized theaters and houses of worship. VENUE systems allow the direct integration of Pro Tools solutions to create and playback live recordings. The VENUE | SC48 Remote System features the VENUE | SC48 digital console paired with the VENUE Stage 48 remote box, enabling the user to place input/output devices away from the console and closer to the sources, eliminating cable clutter.

In May of 2013, we introduced Avid S3L, which delivers the sound quality, performance, and features of Avid live systems in a modular, networked design. In October 2014, we released a newer version, Avid Venue | S3L-X, which was built on the merits of Avid S3L and enhances every facet of live sound production. The open and flexible system is comprised of a high-performance HDX-powered mix engine running VENUE software and AAX DSP plug-ins, scalable remote I/O, a compact EUCON-enabled control surface, and Pro Tools software for integrated live sound mixing and recording. The streamlined networked design simplifies system set-up and configuration with drag-and-drop functionality, while direct Pro Tools recording and mixing capabilities open opportunities for live album releases. The compact S3L-X System can be taken on tour or installed in clubs, theaters, houses of worship, or other performance venues to meet a broad range of demands. The S3 control surface from the S3L-X system was made available in December 2014 as a standalone product allowing users to control Pro Tools or other EUCON-enabled EUCON digital audio workstations in a studio or home environment.

Revenues from control surfaces and live systems accounted for approximately 10%, 9% and 10% of our net revenues from continuing operations in 2014, 2013 and 2012, respectively.

Notation Software

Our Sibelius-branded software allows users to create, edit and publish musical scores. Sibelius software is used by composers, arrangers and other music professionals. Student versions are also available to assist in the teaching of music composition and score writing. The newest version of our musical notation software, Sibelius 7.5, features a task-oriented user interface and native 64-bit performance. We recently introduced Sibelius | Cloud Publishing, which will allow users to view, play, transpose, print and purchase scores using current web browsers and mobile device. We also offer Avid Scorch, an application for the Apple iPad mobile device that turns an iPad into an interactive score library with access to sheet music through an in-app store with more than 150,000 premium titles.

Professional Services and Customer Care

Our Professional Services team delivers workflow design and consulting; program and project management; system installation and commissioning; custom development and role-based product level training. The Professional Services team facilitates the engagement with our customers to maximize their investment in technology; increase their operational efficiency; and enable them to reduce deployment risk and implement our solutions.

Our Education team delivers public and private training to our customers and alliance partners to ensure that they have the necessary skills and technical competencies to deploy, use, administer and create Avid solutions. The Education team develops and licenses curriculum content for use by third party Avid Learning partners to deliver training to customers, users and alliance partners. The Education team includes the Avid Certification program which validates the skills and competency of Avid users, administrators, instructors, support representatives and developers.

Our Customer Care team provides customers with a partner committed to giving them help and support when they need it.  We offer a variety of services contracts and support plans, allowing each customer to select the level of technical and operational support that they need to maintain their operational effectiveness. Our global Customer Care team of more than 300 in-house and third-party industry professionals offers a blend of technology expertise and real-world experience from throughout the audio, visual, and entertainment industries.  The team’s mission is to provide timely, informed responses to our customers’ issues and proactive maintenance for our solutions to help our customers maintain high standards of operational effectiveness.

COMPETITION

5




Our customer markets are highly competitive and subject to rapid change and declining average selling prices. The competitive landscape is fragmented with a large number of companies providing various types of products and services in different markets and geographic areas. We provide integrated solutions that compete based on total value workflow, features, quality, service and price. Companies with which we compete in some contexts may also act as our partners in other contexts, such as large enterprise customer environments.

Companies that compete with us across certain of our products and solutions are listed below by the market in which they compete:
Broadcast and Media:  The Associated Press Inc., Belden Inc., Bitcentral Inc., Dalet S.A., EVS Corporation, Harmonic Inc., Imagine Communications Corp, Ross Video Limited and Vizrt Ltd., among others.
Audio and Video Post and Professional:  Ableton AG, Autodesk Inc., Blackmagic Design Pty Ltd, Harman International Industries Inc., Steinberg Media Technologies GmbH, Universal Audio Inc. and Yamaha Corporation, among others.

In addition, we compete across both previously mentioned markets with companies such as Adobe Systems Incorporated, Apple Inc., Editshare LLC, Quantel Limited, Sony Corporation and EMC Corporation.

Some of our principal competitors are substantially larger than we are and have greater financial, technical, marketing and other resources than we have. For a discussion of these and other risks associated with our competitors, see Item 1A, “Risk Factors.”

OPERATIONS

Sales and Services Channels

We market and sell our products and solutions through a combination of direct, indirect and digital sales channels. Our direct sales channel consists of internal sales representatives serving select customers and markets. Our indirect sales channels include global networks of independent distributors, value-added resellers, dealers and retailers. Our digital sales channel is represented by the online Avid Marketplace.

We have significant international operations with offices in 22 countries and the ability to reach over 130 countries through a combination of our direct sales force and resellers. Sales to customers outside the United States accounted for 64%, 61% and 61%, respectively, of our net revenues from continuing operations in 2014, 2013 and 2012. Additional information about the geographic breakdown of our revenues and long-lived assets can be found in Note P to our Consolidated Financial Statements in Item 8 of this Form 10-K. For additional information about risks associated with our international operations, see Item 1A, “Risk Factors” in Item 1A of this Form 10-K.

We generally ship our products shortly after the receipt of an order. However, a high percentage of our revenues has historically been generated in the third month of each fiscal quarter and concentrated in the latter part of that month. Orders that may exist at the end of a quarter and have not been shipped are not recognized as revenues and are included in revenue backlog.

Certain orders included in revenue backlog may be reduced, canceled or deferred by our customers. Our revenue backlog, as we define it, consists of firm orders received and includes both (i) orders where the customer has paid in advance of our performance obligations being fulfilled, and (ii) orders for future product deliveries or services that have not yet been invoiced by us. The expected timing of the recognition of revenue backlog into revenue is based on current estimates and could change based on a number of factors, including (i) the timing of delivery of products and services, (ii) customer cancellations or change orders, (iii) changes in the estimated period of time Implied Maintenance Release PCS is provided to customers or (iv) changes in accounting standards or policies. Implied Maintenance Release PCS, as we define it, is the implicit obligation to make such software updates available to customers over a period of time which represents implied post-contract customer support and is deemed to be a deliverable in each arrangement and accounted for as a separate element. As there is no industry standard definition of revenue backlog, our reported revenue backlog may not be comparable with other companies. Additional information on our revenue backlog can be found in “Management’s Discussion and Analysis of Financial Condition and Results of Operation.”

We provide customer care services directly through regional in-house and contracted support centers and major-market field service representatives and indirectly through dealers, value-added resellers and authorized third-party service providers. Depending on the solution, customers may choose from a variety of support offerings, including telephone and online technical support, on-site assistance, hardware replacement and extended warranty, and software upgrades. In addition to customer care

6



services, we offer a broad array of professional services, including installation, integration, planning and consulting services, and customer training.

Manufacturing and Suppliers

Our internal manufacturing operations consist primarily of the testing of subassemblies and components purchased from third parties, the duplication of software, and the configuration, final assembly and testing of board sets, software, related hardware components and complete systems. In addition to our internal manufacturing operations, we rely on a network of contractors around the globe to manufacture many of our products, components and subassemblies. Our products undergo testing and quality assurance at the final assembly stage. We depend on sole-source suppliers for certain key hardware product components and finished goods, including some critical items. Although we have procedures in place to mitigate the risks associated with our sole-sourced suppliers, we cannot be certain that we will be able to obtain sole-sourced components or finished goods from alternative suppliers or that we will be able to do so on commercially reasonable terms without a material impact on our results of operations or financial position. For the risks associated with our use of contractors and sole-source vendors, see “Risk Factors” in Item 1A of this Form 10-K.

Our company-operated manufacturing facilities, primarily for final assembly and testing of certain products, are located in: Dublin, Ireland and Mountain View, California. Our Dublin facility is ISO 14001, Environmental Management System, certified.

We and our contract manufacturers manufacture our products at a relatively limited number of different facilities located throughout the world, and, in most cases, the manufacturing of each of our products is concentrated in one or a few locations. An interruption in manufacturing capabilities at any of these facilities, as a result of equipment failure or other reasons, could reduce, delay or prevent the production of our products. Because some of our manufacturing or our contract manufacturer’s operations are located outside of the United States, including in Ireland, China and Thailand, those manufacturing operations are also subject to additional challenges and risks associated with international operations.  For these and other risks associated with our manufacturing operations, see “Risk Factors” in Item 1A of this Form 10-K.

Research and Development

We are committed to delivering best-in-class digital media content-creation solutions that are designed for the unique needs, skills and sophistication levels of our target customer markets. Having helped establish the digital media technology industry, we are building on a 25+ year heritage of innovation and leadership in developing content-creation solutions. We have research and development, or R&D, operations around the globe. Our R&D efforts are focused on the development of digital media content-creation, distribution, and monetization tools that operate primarily on the Mac and Windows platforms. Our R&D efforts also include networking and storage initiatives intended to deliver standards-based media transfer and media asset management tools, as well as stand-alone and network-attached media storage systems for workgroups. In addition to our internal R&D efforts, we outsource a significant portion of certain R&D projects to internationally based partners in Kiev, Ukraine and, to a lesser extent, Thailand. Our R&D expenditures for 2014, 2013 and 2012 were $90.4 million, $95.2 million and $98.9 million, respectively, which represented approximately 17%, 17% and 16%, respectively, of our net revenues from continuing operations. For the risks associated with our use of partners for R&D projects, see “Risk Factors” in Item 1A of this Form 10-K.

Our company-operated R&D operations are located in: Burlington, Massachusetts; Mountain View, California; Berkeley, California; Santa Cruz, California; Munich, Germany; Kaiserslautern, Germany; and Montreal, Canada. We also partner with a vendor in Ukraine for outsourced R&D services and a vendor in Thailand for hardware R&D services. We are in the process of expanding our own development activities to Taiwan.

Intellectual Property

We regard our software and hardware as proprietary and protect our proprietary interests under the laws of patents, copyrights, trademarks and trade secrets, as well as through contractual provisions.

We have obtained patents and have registered copyrights, trademarks and service marks in the United States and in many foreign countries. At December 31, 2014, we held 175 U.S. patents, with expiration dates through 2033, and had 32 patent applications pending with the U.S. Patent and Trademark Office. We have also registered or applied to register various trademarks and service marks in the United States and a number of foreign countries, including Avid, Avid Everywhere, Media Composer, Pro Tools and Sibelius. As a technology company, we regard our patents, copyrights, trademarks, service marks and trade secrets as being

7



among our most valuable assets, together with the innovative skills, technical competence and marketing abilities of our personnel.

Our software is licensed to end users pursuant to shrink-wrap, embedded, click-through or signed license agreements. Our products generally contain features to guard against unauthorized use. Policing unauthorized use of computer software is difficult, and software piracy is a persistent problem for us, as it is for the software industry in general. This problem is particularly acute in some of the international markets in which we operate. Although we attempt to protect our intellectual property rights through patents, trademarks, copyrights, licensing arrangements, maintaining certain technology as trade secrets and other measures, we cannot assure you that any patent, trademark, copyright or other intellectual property rights owned by us will not be invalidated, circumvented or challenged, that such intellectual property rights will provide competitive advantages to us, or that any of our pending or future patent applications will be issued with the claims, or the scope of the claims, sought by us, if at all. We cannot assure you that others will not develop technologies that are similar or superior to our technology, duplicate our technology or design around the patents that we own. In addition, effective patent, copyright and trade secret protection may be unavailable or limited in countries in which we do business or may do business in the future. For these and other risks associated with the protection of our intellectual property, see “Risk Factors” in Item 1A of this Form 10-K.

HISTORY AND EMPLOYEES

Avid was incorporated in Delaware in 1987. We are headquartered in Burlington, Massachusetts, with operations in North America, South America, Europe, Asia and Australia. At December 31, 2014, our worldwide workforce consisted of 1,413 employees and 391 external contractors.

AVAILABLE INFORMATION

We make available free of charge on our website, www.avid.com, copies of our Annual Reports on Form 10-K, our Quarterly Reports on Form 10-Q, our Current Reports on Form 8-K and all amendments to those reports as soon as practicable after filing with the Securities and Exchange Commission, or SEC. Additionally, we will provide paper copies of all of these filings free of charge upon request. Alternatively, these reports can be accessed at the SEC’s Internet website at www.sec.gov. The information contained on our web site shall not be deemed incorporated by reference in any filing under the Securities Act or the Exchange Act.



8



ITEM 1A.
RISK FACTORS

You should carefully consider the risks and uncertainties described below in addition to the other information included or incorporated by reference in this Form 10-K before making an investment decision regarding our common stock. If any of the following risks were to actually occur, our business, financial condition or operating results would likely suffer, possibly materially, the trading price of our common stock could decline, and you could lose part or all of your investment. Additional risks and uncertainties that we are unaware of, or that we currently believe are not material, may also become important factors that adversely affect our business.

Risks Related to Our Business and Industry

If we are unable to successfully execute on our strategy, our business, financial condition, and results of operations could be adversely affected.

We are in the process of transforming our business based on a strategy built on three pillars, Avid Everywhere, The Avid Advantage and the Avid Customer Association. As part of our corporate strategy we have organized our products in three suites, all built upon our MediaCentral Platform. The ongoing implementation of some of our strategy may require additional capital that we may not have access to on reasonable terms or at all. Additionally, our strategy is requiring us to develop expertise in new areas and establish new competencies either through talent acquisition or internal development, which we may not be able to successfully achieve. Moreover, the pace and scope of the transformation contemplated in our strategy increases the risk that not all of our strategic plans will deliver the expected benefits within the anticipated time frames, or at all. Furthermore, as a part of our strategy we are also identifying and executing on opportunities to reduce operating costs. If we are unable successfully to execute on our strategy, our business, financial condition, and results of operations could be adversely affected.

We operate in highly competitive markets, and our competitors may be able to draw upon a greater depth and breadth of resources than those that are available to us.

We operate in highly competitive markets characterized by pressure to innovate, expand feature sets and functionality, accelerate new product releases and reduce prices. Markets for certain of our products also have limited barriers to entry. There is an additional risk of consolidation among our competitors, which could result in fewer, more effective competitors. Customers consider many factors when evaluating our products relative to those of our competitors, including innovation, ease of use, price, feature sets, functionality, reliability, performance, reputation, and training and support, and we may not compare favorably against our competitors in all respects. Our restatement process may have had a negative impact on our reputation among our customers. Some of our current and potential competitors have longer operating histories, greater brand recognition and substantially greater financial, technical, marketing, distribution and support resources than we do. As a result, they may be able to deliver greater innovation, respond more quickly to new or emerging technologies and changes in market demand, devote more resources to the development, marketing and sale of their products, successfully expand into emerging and other international markets, or price their products more aggressively than we can.

If our competitors are more successful than we are in developing products or in attracting and retaining customers, our financial condition and operating results could be adversely affected.

The rapid evolution of the media industry is changing our customers’ needs, businesses and revenue models, and if we cannot anticipate or adapt quickly, our business will be harmed.

The media industry has rapidly and dramatically transformed over the past few years and is continuing to do so as free content, minimal entry costs for creation and distribution, and the expansion of mobile devices have become prevalent. As a result, our traditional customers’ needs, businesses and revenue models are changing, often in ways that deviate from our core strengths and traditional bases. If we cannot anticipate these changes or adapt to them quickly, our business will be harmed. For example, our customers have to address the increasing digitization of the media industry, which requires the creation of a more seamless value chain between content creation and monetization. Furthermore, because of the consumerization of the media industry, there is more pressure to create media that can be repurposed in a variety of ways in an efficient manner. As a result of these industry changes, traditional advertising channels are also facing competition from web and mobile platforms and diminished revenues from traditional advertising will cause some customers’ budgets for the purchase of our solutions to decline; this may be particularly true among local television stations, which in the past have been an important customer industry for us. Additionally,

9



our customers may also seek to pool or share facilities and resources with others in their industry and engage with providers of software as a service.

We continually assess new products and solutions for our customers and we continue to implement our Avid Everywhere strategy and platform designed to address changes in the industry by offering an open platform that will enable people to connect, collaborate, store, manage, distribute, share and monetize media assets; however, the changes in the industry may reduce demand for some of our existing products and services. Our competitive landscape continues to evolve as the media industry rapidly evolves. New or non-traditional competitors may arise or adapt in response to this evolution of the media industry, which could create downward price pressure on our products and solutions and reduce our market share and revenue opportunities.

Our success depends in significant part on our ability to provide innovative products and solutions in response to dynamic and rapidly evolving market demand.

To succeed in our market, we must deliver innovative products and solutions. Innovation requires both that we accurately predict future market trends and customer expectations and that we quickly adapt our development efforts in response. We also have the challenge of protecting our product roadmap and new product initiatives from leaks to competitors that might reduce or eliminate any innovative edge that we seek to gain. Predicting market trends is difficult, as our market is dynamic and rapidly evolving. Additionally, given the complex, sophisticated nature of our solutions and our typically lengthy product development cycles, we may not be able to rapidly change our product direction or strategic course. If we are unable to accurately predict market trends or adapt to evolving market conditions, our ability to capture customer demand will suffer and our market reputation and financial performance will be negatively affected. Even to the extent we make accurate predictions and possess the requisite flexibility to adapt, we may be able to pursue only a handful of possible innovations as a result of limited resources. Our success, therefore, further depends on our ability to identify and focus on the most promising innovations.

When we do introduce new products, our success depends on our ability to manage a number of risks associated with new products including but not limited to timely and successful product launch, market acceptance, and the availability of products in appropriate locations, quantities and costs to meet demand. For example, we have focused a significant part of our development efforts on developing our Avid Everywhere Platform, discussed in the preceding risk factor. There can be no assurance that these efforts will be successful in the near future, or at all, or that our competitors will not take significant market share in similar efforts. If we fail to develop new products and to manage new product introductions and transitions properly, our financial condition and operating results could be harmed.

Our international operations expose us to legal, regulatory and other risks that we may not face in the United States.

We derive more than half of our revenues from customers outside of the United States, and we rely on foreign contractors for the supply and manufacture of many of our products. We also conduct significant research and development activities overseas, including through third-party development vendors. For example, a significant part of our research and development is outsourced to contractors operating in Kiev, Ukraine and Thailand and we are in the process of expanding our own development activities to Taiwan and the Philippines. Our international operations are subject to a variety of risks that we may not face in the United States, including:
the financial and administrative burdens associated with compliance with a myriad of environmental, tax and export laws, as well as other business regulations in foreign jurisdictions, including high compliance costs, inconsistencies among jurisdictions, and a lack of administrative or judicial interpretative guidance;
reduced or varied protection for intellectual property rights in some countries;
regional economic downturns;
economic, social and political instability abroad and international security concerns in general;
fluctuations in foreign currency exchange rates;
longer collection cycles for accounts receivable payment cycles and difficulties in enforcing contracts;
difficulties in managing and staffing international implementations and operations, and executing our business strategy internationally;
potentially adverse tax consequences, including the complexities of foreign value added or other tax systems and restrictions on the repatriation of earnings;
increased financial accounting and reporting burdens and complexities;
compliance with the applicable laws and regulations, including, for example, the EU Data Protection Directive, the U.S. Foreign Corrupt Practices Act, or FCPA, and the U.K. Bribery Act, particularly in emerging market countries;

10



difficulties in maintaining effective internal controls over financial reporting and disclosure controls;
costs and delays associated with developing products in multiple languages; and
foreign exchange controls that may prevent or limit our ability to repatriate income earned in foreign markets.

Our overall success in international markets depends, in part, on our ability to succeed in differing legal, regulatory, economic, social and political conditions. We may not be successful in developing, implementing or maintaining policies and strategies that will be effective in managing these risks in each country where we do business. Our failure to manage these risks successfully, including developing appropriate contingency plans for our outsourced research and development work, could harm our international operations, reduce our international sales and increase our costs, thus adversely affecting our business, operating results and financial condition.

We have a significant relationship with a development vendor operating in Kiev, Ukraine and manufacturing vendors operating in China and Thailand, and changes to those relationships may result in delays or disruptions that could harm our business.

We rely on an offshore software development vendor for developing and servicing our products primarily from its offices in Kiev, Ukraine and manufacturing vendors for manufacturing certain of our products and developing hardware primarily in China and Thailand. If one of those vendors were, for any reason, to cease or experience significant disruptions in its operations, among others as a result of political unrest, we might be unable to replace it on a timely basis with a comparably priced provider. We would also have to expend time and resources to train any new development or manufacturing vendor. If any of the vendors were to suffer an interruption in its business, or experience delays, disruptions or quality control problems in development or manufacturing operations, or if we had to change development or manufacturing vendors, our ability to provide services to our customers would be delayed and our business, operating results and financial condition would be adversely affected.

We operate in many different jurisdictions and we could be adversely affected by violations of the U.S. Foreign Corrupt Practices Act, the U.K. Bribery Act and similar foreign anti-corruption laws.

The FCPA, and similar foreign anti-corruption laws generally prohibit companies and their intermediaries from offering, promising, authorizing, or making payments to foreign officials for the purpose of influencing any act or decision of such official in his or her official capacity, inducing the official to do any act in violation of his or her lawful duty, or to secure any improper advantage in obtaining or retaining business. Recent years have seen a substantial increase in the global enforcement of anti-corruption laws, with more frequent voluntary self-disclosures by companies, aggressive investigations and enforcement proceedings by both the DOJ and the SEC resulting in record fines and penalties, increased enforcement activity by non-U.S. regulators, and increases in criminal and civil proceedings brought against companies and individuals.

Our internal policies mandate compliance with these anti-corruption laws. We operate in many parts of the world that are recognized as having governmental corruption problems to some degree and where local customs and practices may not foster strict compliance with anti-corruption laws. Our continued operation and expansion outside the United States could increase the risk of such violations in the future. Despite our training and compliance programs, we cannot assure you that our internal control policies and procedures will protect us from unauthorized reckless or criminal acts committed by our employees or agents. In the event that we believe or have reason to believe that our employees or agents have or may have violated applicable anti-corruption laws, including the FCPA, we may be required to investigate or have outside counsel investigate the relevant facts and circumstances, which can be expensive and require significant time and attention from senior management. Violations of these laws may result in severe criminal or civil sanctions, which could disrupt our business and result in a material adverse effect on our reputation, business, results of operations or financial condition.

Failure of our information systems or breaches of data security could impact our business.

Our systems and processes involve the storage and transmission of proprietary information and sensitive or confidential data, including personal information of employees, customers and others. In addition, we rely on information systems controlled by third parties. Information system failures, network disruptions and system and data security breaches, manipulation, destruction or leakage, whether intentional or accidental, could harm our ability to conduct our business, impede development, manufacture or shipment of products, interrupt or delay processing of transactions and reporting financial results or result in the unintentional disclosure of proprietary, sensitive or confidential information. With our development of Avid Everywhere with its public and private marketplaces and cloud based offerings, our and our customer’s data and financial and proprietary information could

11



become more susceptible to such failures and data breaches. Additionally, significant or repeated reductions in the performance, reliability, security or availability of our information systems and network infrastructure could significantly harm our brand and reputation and ability to attract and retain existing and potential users, customers, advertisers and content providers.

Such information system failures or unauthorized access could be caused by our failure to adequately maintain and enhance these systems and networks, external theft or attack, misconduct by our employees, contractors, or vendors, or many other causes such as power failures, earthquake, fire or other natural disasters. Such information system failures or unauthorized access could expose us, our customers or the individuals affected to a risk of loss or misuse of this information, resulting in litigation and potential liability for us. In addition, the cost and operational consequences of implementing further data protection measures could be significant.

Additionally, the Avid Everywhere cloud based offerings depend on the availability and proper functioning of certain third-party services, including but not limited to cloud provider, database management, backup, monitoring and logging services. The failure or improper functioning of these third party services could lead to outages, security breaches and data losses, including loss of customer creative assets. If third-party services become unavailable, we may need to expend considerable resources identifying and integrating alternate providers.

Our engagement of contractors for product development and manufacturing may reduce our control over those activities, provide uncertain cost savings and expose our proprietary assets to greater risk of misappropriation.

We outsource a portion of our software development and our hardware design and manufacturing to contractors, both domestic and offshore. These relationships provide us with more flexible resource capabilities, access to global talent and cost savings, but also expose us to risks that may not exist or may be less pronounced with respect to our internal operations. We are able to exercise only limited oversight of our contractors, including with respect to their engineering and manufacturing processes, resource allocations, delivery schedules, security procedures and quality control. Language, cultural and time zone differences complicate effective management of contractors that are located abroad. Additionally, competition for talent in certain locations may lead to high turnover rates that disrupt development or manufacturing continuity. The manufacturers we use also manufacture products for other companies, including our competitors. Our contractors could choose to prioritize capacity for other users, increase the prices they charge us or reduce or eliminate deliveries to us, which could have a material adverse effect on our business. Moreover, if any of our third-party manufacturing suppliers suffer any damage to facilities, lose benefits under material agreements, experience power outages, lack sufficient capacity to manufacture our products, encounter financial difficulties or are unable to secure necessary raw materials from their suppliers, or suffer any other disruption or reduction in efficiency, we may encounter supply delays or disruptions. Pricing terms offered by contractors may be highly variable over time reflecting, among other things, order volume, local inflation and exchange rates. For example, during the past few years, including in 2014, most of our outsourced manufacturers have been in China, where the cost of manufacturing has been increasing and labor unrest and turn-over rates at manufacturers have been on the rise. Some of our contractor relationships are based on contract, while others operate on a purchase order basis, where we do not have the benefit of written protections with respect to pricing or other critical terms.

Many of our contractors require access to our intellectual property and our confidential and proprietary information to perform their services. Protection of these assets in relevant offshore locations may be less robust than in the United States. We must rely on policies and procedures we have instituted with our contractors and certain confidentiality and contractual provisions in our written agreements, to the extent they exist, for protection. These safeguards may be inadequate to prevent breaches. If a breach were to occur, available legal or other remedies may be limited or otherwise insufficient to compensate us for any resulting damages.

Certain of our contractor relationships involve complex and mission-critical dependencies. If any of the preceding risks were to occur, we might not be able to rapidly wind down these relationships or quickly transition to alternative providers.

Our success depends in part on our ability to hire and retain competent and skilled management and technical, sales and other personnel.


12



We are highly dependent on the continued service and performance of our management team and key technical, sales and other personnel and our success will depend in part on our ability to retain these employees in a competitive job market. If we fail to appropriately match the skill sets of our employees to our needs we may incur increased costs or experience challenges with execution of our strategic plan. We rely on cash bonuses and equity awards as significant compensation and retention tools for key personnel. In addition to compensation, we seek to foster an innovative work culture to retain employees. We also rely on the attractiveness of developing technology for the film, television and music industries as a means of retention. We continue to take actions to transform strategically, operationally and culturally and to achieve cost savings, all with the intent to drive improved operating performance both in the U.S and internationally. The uncertainty inherent in our transformational strategy and the resulting workload and stress may make it difficult to attract and retain key personnel and increase turnover of key officers and employees.

Our competitors may in some instances be able to offer a more established or more dynamic work environment, higher compensation or more opportunities to work with cutting-edge technology than we can. If we are unable to retain our key personnel or appropriately match skill sets with our needs, we would be required to expend significant time and financial resources to identify and hire new qualified personnel and to transfer significant internal historical knowledge, which might significantly delay or prevent the achievement of our business objectives.

Potential acquisitions could be difficult to consummate and integrate into our operations, and they and investment transactions could disrupt our business, dilute stockholder value or impair our financial results.

As part of our business strategy, from time to time we may acquire companies, technologies and products that we believe can improve our ability to compete in our existing customer markets or allow us to enter new markets. We may also pursue strategic investments. The potential risks associated with acquisitions and investment transactions include, but are not limited to:
failure to realize anticipated returns on investment, cost savings and synergies;
difficulty in assimilating the operations, policies and personnel of the acquired company;
challenges in combining product offerings and entering into new markets in which we may not have experience;
distraction of management’s attention from normal business operations;
potential loss of key employees of the acquired company;
difficulty implementing effective internal controls over financial reporting and disclosure controls and procedures;
impairment of relationships with customers or suppliers;
possibility of incurring impairment losses related to goodwill and intangible assets; and
unidentified issues not discovered in due diligence, which may include product quality issues or legal or other contingencies.

In order to complete an acquisition or investment transaction, we may need to obtain financing, including through the incurrence of borrowings or the issuance of debt or equity securities. This could potentially dilute stockholder value for existing stockholders. We may borrow to finance an acquisition, and the amount and terms of any potential future acquisition-related borrowings, as well as other factors, could affect our liquidity and financial condition and potentially our credit ratings. We may not be able to consummate such financings on commercially reasonable terms, or at all, in which case our ability to complete desired acquisitions or investments and to implement our business strategy, and as a result our financial results, may be materially impaired. In addition, our effective tax rate on an ongoing basis is uncertain, and business combinations and investment transactions could impact our effective tax rate. We may experience risks relating to the challenges and costs of closing a business combination or investment transaction and the risk that an announced business combination or investment transaction may not close. As a result, any completed, pending or future transactions may contribute to financial results that differ from the investment community’s expectations in a given quarter.

We obtain hardware product components and finished goods under sole-source supply arrangements, and any disruptions to these arrangements could jeopardize the manufacturing or distribution of certain of our hardware products.

Although we generally prefer to establish multi-source supply arrangements for our hardware product components and finished goods, multi-source arrangements are not always possible or cost-effective. We consequently depend on sole-source suppliers for certain hardware product components and finished goods, including some critical items. We do not generally carry significant inventories of, and may not in all cases have guaranteed supply arrangements for, these sole-sourced items. If any of our sole-source suppliers were to cease, suspend or otherwise limit production or shipment (due to, among other things, macroeconomic events, political crises or natural or environmental disasters or other occurrences), or adversely modify supply terms or pricing,

13



our ability to manufacture, distribute and service our products may be impaired and our business could be harmed. We cannot be certain that we will be able to obtain sole-sourced components or finished goods, or acceptable substitutes, from alternative suppliers or that we will be able to do so on commercially reasonable terms. We may also be required to expend significant development resources to redesign our products to work around the exclusion of any sole-sourced component or accommodate the inclusion of any substitute component.

We depend on the availability and proper functioning of certain third-party technology that we incorporate into or bundle with our products. Third-party technology may include defects or errors that could adversely affect the performance of our products. If third-party technology becomes unavailable, we may need to expend considerable resources integrating alternative third-party technology or developing our own substitute technology.

We license third-party technology for incorporation into or bundling with our products. This technology may provide us with critical or strategic feature sets or functionality. The profit margin for each of our products depends in part on the royalty, license and purchase fees we pay in connection with third-party technology. To the extent we add additional third-party technology to our products and we are unable to offset associated costs, our profit margins may decline and our operating results may suffer. In addition to cost implications, third-party technology may include defects or errors that could adversely affect the performance of our products, which may harm our market reputation or adversely affect our product sales. Third-party technology may also include certain open source software code that if used in combination with our own software may jeopardize our intellectual property rights or limit our ability to sell through certain sales channels. If any third-party technology license expires, is terminated or ceases to be available on commercially reasonable terms, we may be required to expend considerable resources integrating alternative third-party technology or developing our own substitute technology. In the interim, sales of our products may be delayed or suspended or we may be forced to distribute our products with reduced feature sets or functionality.

Lengthy procurement lead times and unpredictable life cycles and customer demand for some of our products may result in significant inventory risks.

With respect to many of our products, particularly our audio products, we must procure component parts and build finished inventory far in advance of product shipments. Certain of these products may have unpredictable life cycles and encounter rapid technological obsolescence as a result of dynamic market conditions. We procure product components and build inventory based upon our forecasts of product life cycle and customer demand. If we are unable to accurately forecast product life cycle and customer demand or unable to manage our inventory levels in response to shifts in customer demand, the result may be insufficient, excess or obsolete product inventory. Insufficient product inventory may impair our ability to fulfill product orders and negatively affect our revenues, while excess or obsolete inventory may require a write-down on products and components to their net realizable value, which would negatively affect our results of operations.

Our revenues and operating results depend significantly on our third-party reseller and distribution channels. Our failure to adequately manage the delivery model for our products and services could adversely affect our revenues and gross margins and therefore our profitability.

We distribute many of our products indirectly through third-party resellers and distributors. We also distribute products directly to end-user customers. Successfully managing the interaction of our direct and indirect channel efforts to reach various potential customer industries for our products and services is a complex process. For example, in response to our direct sales strategies or for other business reasons, our current resellers and distributors may from time to time choose to resell our competitors’ products in addition to, or in place of, ours. Moreover, since each distribution method has distinct risks and gross margins, our failure to identify and implement the most advantageous balance in the delivery model for our products and services could adversely affect our revenues and gross margins and therefore our profitability.

In addition, some of our resellers and distributors have rights of return, as well as inventory stock rotation and price protection. Accordingly, reserves for estimated returns and exchanges, and credits for price protection, are recorded as a reduction of revenues upon applicable product shipment, and are based upon our historical experience. Our reliance upon indirect distribution methods may reduce visibility to demand and pricing issues, and therefore make forecasting more difficult and, to the extent that returns exceed estimates, our revenues and operating results may be adversely affected.



14



We may not be able to achieve the efficiencies, savings and other benefits anticipated from our cost reduction, margin improvement and other business optimization initiatives.

We are continually reviewing and implementing programs throughout the company to reduce costs, increase efficiencies and enhance our business. We have in the past undertaken and expect to continue to undertake various restructuring activities and cost reduction initiatives in an effort to better align our organizational structure and costs with our strategy. In connection with these activities, we may experience a disruption in our ability to perform functions important to our strategy. Unexpected delays, increased costs, challenges with adapting our internal control environment to a new organizational structure, inability to retain and motivate employees or other challenges arising from these initiatives could adversely affect our ability to realize the anticipated savings or other intended benefits of these activities and could have a material adverse impact on our financial condition and operating results.

Our products may experience quality issues that could negatively impact our customer relationships, our market reputation and our operating results.

Our software products, as is typical of sophisticated, complex software, occasionally include coding defects or errors (commonly referred to as “bugs”), which in some cases may interfere with or impair a customer’s ability to operate or use the software. Similarly, our hardware products could include design or manufacturing defects that could cause them to malfunction. Although we employ quality control measures, those measures are not designed or intended to detect and remedy all defects. The time and resources available to devote to quality control measures are, in part, dependent on other business considerations, such as meeting customer expectations with respect to release schedules. Any product defects could result in loss of customers or revenues, delays in revenue recognition, increased product returns, damage to our market reputation and significant warranty or other expense and could have a material adverse impact on our financial condition and operating results.

Our intellectual property and trade secrets are valuable assets that may be subject to third-party infringement and misappropriation.

As a technology company, our intellectual property and trade secrets are among our most valuable assets. Infringement or misappropriation of these assets results in lost revenues to us and thereby ultimately reduces their value. We rely on a combination of patent, copyright, trademark and trade secret laws, as well as confidentiality procedures, contractual provisions and anti-piracy technology in certain of our products to protect our intellectual property and trade secrets. Most of these tools require vigilant monitoring of competitor and other third-party activities and of end-user usage of our products to be effective. These tools may not provide adequate protection in all instances, may be subject to circumvention, or may require a vigilance that in some cases exceeds our capabilities or resources. Additionally, our business model is increasingly focused on software products and as we offer more software products our revenues may be more vulnerable to loss through piracy, which could result in revenue losses for us. While we may seek to engage with those potentially infringing our intellectual property to negotiate a license for use, we also may seek legal recourse. The legal regimes of certain countries in which we operate may not protect our intellectual property or trade secrets to the same extent as do the laws of the United States. Regardless of jurisdiction, assuming legal protection exists and infringement or misappropriation is detected, any enforcement action that we may pursue could be costly and time-consuming, the outcome will be uncertain, and the alleged offender in some cases may seek to have our intellectual property rights invalidated. If we are unable to protect our intellectual property and trade secrets, our business could be harmed.

Our results could be materially adversely affected if we are accused of, or found to be, infringing third parties’ intellectual property rights.

Because of technological change in our industry, extensive and sometimes uncertain patent coverage, and the rapid issuance of new patents, it is possible that certain of our products or business methods may infringe the patents or other intellectual property rights of third parties. Companies in the technology industry own large numbers of patents, copyrights, trademarks and trade secrets and frequently enter into litigation based on allegations of infringement or other violations of intellectual property rights. Our technologies may not be able to withstand any third-party claims or rights against their use. We have received claims and are subject to litigation alleging that we infringe patents owned by third parties and may in the future be the subject to such claims and litigation. Regardless of the scope or validity of such patents or the merits of any patent claims by potential or actual litigants, we could incur substantial costs in defending intellectual property claims and litigation, and such claims and litigation could distract management’s attention from normal business operations. In addition, we provide indemnification provisions in

15



agreements with certain customers covering potential claims by third parties of intellectual property infringement. These agreements generally provide that we will indemnify customers for losses incurred in connection with an infringement claim brought by a third party with respect to our products, and we have received claims for such indemnification. The results of any intellectual property litigation to which we are, or may become, a party, or for which we are required to provide indemnification, may require us to:
cease selling or using products or services that incorporate the challenged intellectual property;
make substantial payments for legal fees, settlement payments or other costs or damages;
obtain a license, which may not be available on reasonable terms, to sell or use the relevant technology, which such license could require royalties that would significantly increase our cost of goods sold; or
redesign products or services to avoid infringement, which such redesign could involve significant costs and result in delayed and/or reduced sales of the affected products.

If we are unable to sell our professional products through retail sales channels, our operating results could be adversely affected.

Following the divestiture of certain of our consumer product lines in July 2012, we continue to have a presence in retail because our professional-level products are offered through specialty retail stores.  Our ability to continue to sell our professional products through certain retail sales channels may be impaired because we will sell fewer types of products and fewer units through those channels, impacting retailers’ willingness to carry our professional-level products.

Unanticipated changes in our tax provisions, the adoption of new tax legislation or exposure to additional tax liabilities could affect our profitability.

We are subject to income and other taxes in the United States and numerous foreign jurisdictions. Our tax liabilities are affected by the amounts we charge for inventory, services, licenses and other items in intercompany transactions. We are also subject to ongoing tax audits in various jurisdictions. Tax authorities may disagree with our intercompany charges, cross-jurisdictional transfer pricing or other matters and assess additional taxes. We regularly assess the likely outcomes of these audits in order to determine the appropriateness of our tax provision. However, there can be no assurance that we will accurately predict the outcomes of these audits, and the amounts ultimately paid upon the resolution of an audit could be materially different from the amounts previously included in our income tax expense and therefore could have a material impact on our tax provision, net income and cash flows. In addition, our tax provision in the future could be adversely affected by changes to our operating structure, changes in the mix of earnings in countries with differing statutory tax rates, changes in the valuation of deferred tax assets and liabilities, changes in tax laws and the discovery of new information in the course of our tax return preparation process.

We may be the subject of litigation, which, if adversely determined, could harm our business and operating results.

We may be subject to claims arising in the normal course of business. The costs of defending any litigation, whether in cash expenses or in management time, could harm our business and materially and adversely affect our operating results and cash flows. An unfavorable outcome on any litigation matter could require that we pay substantial damages, or, in connection with any intellectual property infringement claims, could require that we pay ongoing royalty payments or prohibit us from selling certain of our products. In addition, we may decide to settle any litigation, which could cause us to incur significant settlement costs. A settlement or an unfavorable outcome on any litigation matter could have a material and adverse effect on our business, operating results, financial condition and cash flows.

A natural disaster or catastrophic event may significantly limit our ability to conduct business as normal and harm our business.

Our operations and the operations of our customers are vulnerable to interruptions by natural disasters or catastrophic events. For example, we operate a complex, geographically dispersed business, which includes significant personnel, customers and facilities presence in California near major earthquake fault lines. We may not be able to protect our company from such catastrophic events and we are predominantly uninsured for business continuity losses and disruptions caused by catastrophic events. Disruption or failure of our or our customers’ networks or systems, or injury or damage to either parties’ personnel or physical infrastructure, caused by a natural disaster, public health crisis, terrorism, cyber attack, act of war or other catastrophic event may significantly limit our or our customers’ ability to conduct business as normal, including our ability to communicate and transact with customers, suppliers, distributors and resellers, which may negatively affect our revenues and operating results.

16



Additionally, a natural disaster or catastrophic event could cause us or our customers to suspend all or a portion of operations for a significant period of time, result in a permanent loss of resources, and require the relocation of personnel and material to alternate facilities that may not be available or adequate. Such an event could also cause an indirect economic impact on our customers, which could impact our customers’ purchasing decisions and reduce demand for our products and services. A prolonged disruption of our business could also damage our reputation, particularly among our global news organization customers who are likely to require our solutions and support during such time. Any of these factors could cause a material adverse impact on our financial condition and operating results.

Risks Related to Our Liquidity and Financial Performance

A significant decrease in our liquidity could negatively affect our business.

Maintaining adequate liquidity is important to our business operations. We meet our liquidity needs primarily through cash generated by operations, which we have supplemented from time to time with borrowings under our credit facilities with Wells Fargo Capital Finance LLC, or Wells Fargo. Significant fluctuations in our cash balances could harm our ability to meet our immediate liquidity needs, impair our capacity to react to sudden or unexpected contractions or growth in our business, reduce our ability to withstand a sustained period of economic crisis, and impair our ability to compete with competitors with greater financial resources. In addition, fluctuations in our cash balances could cause us to draw on our credit facilities and therefore reduce available funds under the facilities, and could cause us to violate the liquidity covenant under our credit agreement (see “Management’s Discussion and Analysis of Financial Condition and Results of Operation - Liquidity and Capital Resources” in Item 7 of this Form 10-K). Furthermore, our credit agreement contains limitations on the amounts we may borrow at any time. Our Credit Agreement expires on October 1, 2015 and while we may choose to refinance our current credit facilities, we may not be successful in doing so on favorable terms, or at all. If we are unable to generate sufficient cash flow or borrow sufficient funds under our current credit agreement or refinance our credit facilities, our liquidity may significantly decrease, which could have an adverse effect on our business.

We have deferred a significant portion of revenues from customer transactions occurring prior to 2011 to subsequent periods. The deferred revenues resulted in our reporting net income for the fiscal years 2012, 2013, and 2014. However, as deferred revenues from periods prior to 2011 are amortized, there are no assurances that we will be able to report net income in future periods.

As a result of the restatement of our September 30, 2012 and prior financial statements, which was completed in 2014, we have deferred a significant portion of revenues from customer transactions occurring prior to 2011 to subsequent periods. The deferred revenue resulted in our reporting net income of approximately $15 million in 2014, $21 million in 2013, and $93 million in 2012 and also adversely affected our stockholders’ equity and working capital for those periods. As this deferred revenue is amortized, there are no assurances that we will be able to report net income in future periods. Our financial results and the impact of the deferred revenue are discussed in “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in Item 7 of this Form 10-K. We cannot be certain when, or if, our operations will be profitable in future periods.

Restrictions in our credit agreement may limit our activities.

Our current credit agreement for our revolving credit facilities contains restrictive covenants that limit our ability to engage in activities that could otherwise benefit us, including limitations on our ability to make investments, incur additional indebtedness, issue equity and create liens. We are also required to meet a specified liquidity-based financial covenant under the terms of the credit agreement. Similar or additional restrictions and covenants may be included in any new credit facilities we may enter into on or prior to the expiration of our current facility on October 1, 2015. Failure to comply with any of these restrictions or covenants may result in an event of default under our current or future credit agreement, which could permit acceleration of any outstanding debt we may have in the future and require us to repay the debt before its scheduled due date. If an event of default were to occur, we might not have sufficient funds available to make the payments required. If we are unable to repay amounts owed, our lenders may be entitled to foreclose on and sell substantially all of our assets, which we have used to secure our borrowings under the credit agreement. In addition, our borrowings under the facility are secured by first priority liens on substantially all of our U.S. assets.

Our revenues and operating results are difficult to predict and may fluctuate from period to period.


17



Our results of operations have been and may continue to be subject to significant quarterly variation. Our results through 2016 will, in particular, be affected by the amortization of deferred revenues relating to periods prior to 2011. Our revenues and operating results for any particular quarter may also vary due to a number of factors, including, but not limited to, those enumerated under the section “Cautionary Note on Forward-Looking Statements,appearing elsewhere in this Form 10-K and:
the timing of large or enterprise-wide sales and our ability to recognize revenues from such sales;
demand planning and logistics;
reliance on third-party reseller and distribution channels;
changes in operating expenses;
price protections and provisions for inventory obsolescence extended to resellers and distributors;
seasonal factors, such as higher consumer demand at year-end; and
complex accounting rules for revenue recognition.

The occurrence and interaction of these variables may cause our revenues and operating results to fluctuate from period to period. As a result, period-to-period comparisons of our revenues and operating results may not provide a good indication of our future performance.

Our revenue backlog estimates are based on certain assumptions and are subject to unexpected adjustments and cancellations and backlog orders may not be timely converted to revenues in any particular fiscal period, if at all, or be indicative of our actual operating results for any future period.

Our revenue backlog, as we define it, consists of firm orders received and includes both (i) orders where the customer has paid in advance of our performance obligations being fulfilled, which are reflected as deferred revenues on our balance sheet, and (ii) orders for future product deliveries or services that have not yet been invoiced by us. To the extent that our customers cancel their orders with us or reduce their requirements during a particular period for any reason, we will not realize revenue or profit from the associated revenue backlog. Even where a project proceeds as scheduled, it is possible that the customer may default and fail to pay amounts owed to us. Material delays, payment defaults or cancellations could reduce the amount of revenue backlog currently reported, and consequently, could inhibit the conversion of that backlog into revenues. Furthermore, orders included in our revenue backlog may not be profitable. We may experience variances in the realization of our revenue backlog because of project delays or cancellations resulting from external market factors and economic factors beyond our control. As a result, even if we realize all of the revenue from the projects in our revenue backlog, if our expenses associated with these projects are higher than expected, our results of operations and financial condition would be adversely affected.

Fluctuations in foreign exchange rates may result in short-term currency exchange losses and could adversely affect our revenues from foreign markets and our manufacturing costs in the long term.

Our international sales are, for the most part, transacted through foreign subsidiaries and generally in the currency of the end-user customers.  Consequently, we are exposed to short-term currency exchange risks that may adversely affect our revenues, operating results and cash flows. The majority of our international sales are transacted in euros. To hedge against the dollar/euro exchange exposure of the resulting forecasted payables, receivables and cash balances, we may enter into foreign currency contracts. The success of our hedging programs depends on the accuracy of our forecasts of transaction activity in foreign currency. To the extent that these forecasts are over- or understated during periods of currency volatility, we may experience currency gains or losses. Our hedging activities may only offset a portion of the adverse financial impact resulting from unfavorable movement in dollar/euro exchange rates, which could adversely affect our financial position or results of operations.

Furthermore, the significance to our business of sales in Europe subjects us to risks associated with long-term changes in the dollar/euro exchange rate.  A sustained strengthening of the U.S. dollar against the euro would decrease our expected future U.S. dollar revenues from European sales and could have a significant adverse effect on our overall profit margins.  During the past few years, economic instability in Europe, including concern over sovereign debt in Greece, Italy, Ireland and certain other European Union countries, caused significant fluctuations in the value of the euro relative to those of other currencies, including the U.S. dollar.  Continuing uncertainty regarding economic conditions, including the solvency of these countries and the stability of the Eurozone, could lead to significant long-term economic weakness and reduced economic growth in Europe, the occurrence of which, or the potential occurrence of which, could lead to a sustained strengthening of the U.S. dollar against the euro, adversely affecting the profitability of our European operations.


18



In addition, we source and manufacture many of our products in China and our costs may increase should the renminbi not remain stable with the U.S. dollar. Although the renminbi is pegged against a basket of currencies determined by the People’s Bank of China, the renminbi may appreciate or depreciate significantly in value against the U.S. dollar in the long term.  In addition, if China were to permit the renminbi to float to a free market rate of exchange, it is widely anticipated that the renminbi would appreciate significantly in value against U.S. dollar.  An increase in the value of the renminbi against the U.S. dollar would have the effect of increasing the labor and production costs of our Chinese manufacturers in U.S. dollar terms, which may result in their passing such costs to us in the form of increased pricing, which would adversely affect our profit margins if we could not pass those price increases along to our customers.

Our debt obligations may limit our ability to pursue investment opportunities and respond to business needs and economic and industry condition.

In October 2010, we entered into four-year secured revolving credit facilities in the aggregate principal amount of up to
$60 million. On August 29, 2014, we extended the original maturity date of our revolving credit facilities from October 1, 2014 to October 1, 2015. The amount we are actually entitled to borrow at any time is limited by a formula in the agreement and may be less than $60 million. Any indebtedness we incur under current or future credit facilities could have negative consequences, including, increasing our vulnerability to adverse economic and industry conditions; limiting our ability to obtain additional financing; limiting our ability to complete a merger or an acquisition; and limiting our flexibility in planning for, or reacting to, changes in our business.

If we are unable to satisfy our obligations under our credit agreement, our liquidity and ability to operate our business could be adversely affected.

Our ability to satisfy our obligations under our current or future credit facilities will depend on our future operating performance and on economic, financial, competitive and other factors beyond our control. Our business may not generate sufficient cash flows to meet these obligations or to successfully execute our business strategy. If we are unable to meet our obligations under our current or future credit facilities, including our debt service obligations, or if we are unable to refinance our current credit facilities, we may be forced to reduce or delay capital expenditures or research and development expenditures, seek additional financing or equity capital, restructure or refinance our debt, or sell assets and our business could be adversely affected.

Economic weakness and uncertainty could adversely affect our revenues, gross margins and expenses.

Our business is impacted by global economic conditions, which have been in recent years and continue to be volatile. Specifically, our revenues and gross margins depend significantly on global economic conditions and the demand for our products and services in the markets in which we compete. Economic weakness and uncertainty have resulted, and may result in the future, in decreased revenue, gross margin, earnings or growth rates and difficulty managing inventory levels. Sustained uncertainty about global economic conditions may adversely affect demand for our products and services and could cause demand to differ materially from our expectations as customers curtail or delay spending on our products and services. Economic weakness and uncertainty also make it more difficult for us to make accurate forecasts of revenues, gross margins and expenses.

The inability of our customers to obtain credit in the future may impair their ability to make timely payments to us. Tightening of credit by financial institutions could also lead customers to postpone spending or to cancel, decrease or delay their existing or future orders with us. Customer insolvencies could negatively impact our revenues and our ability to collect receivables. Financial difficulties experienced by our suppliers or distributors could result in product delays, increased accounts receivable defaults and inventory challenges. In the event we are impacted by global economic weakness, we may record additional charges relating to restructuring costs or the impairment of assets and our business and results of operations could be materially and adversely affected.

Risks related to our recent restatement, accounting review and internal controls

Our internal control over financial reporting and our disclosure controls and procedures were not effective as of December 31, 2014. We may not be able to properly remediate existing or future weaknesses or deficiencies in our internal controls, which could adversely affect our ability to produce accurate and timely financial statements, harm our reputation, negatively impact our stock price and damage our business.


19



In the second quarter of 2013, we determined that we needed to restate revenue for millions of customer transactions for interim and annual periods ended during the periods from January 1, 2005 to September 30, 2012 (the Restatement Periods) to correct errors in our historically issued financial statements. In addition, certain other adjustments arose in the Restatement Periods that were deemed material and were adjusted in the restated financial statements for the Restatement Periods. The errors in the misapplication of GAAP over revenue recognition and the other errors identified resulted from several control deficiencies that were in existence during the Restatement Periods. These control deficiencies individually and when aggregated represent material weaknesses in our internal control over financial reporting and, as a result, we concluded that our internal control over financial reporting and our disclosure controls and procedures were not effective as of December 31, 2014.

As described in Part II, Item 9A, “Controls and Procedures,” of this Annual Report on Form 10-K, due to the limited time between (i) the completion of the restatement and related filing of the Annual Report on Form10-K for the year ended December 31, 2013 and the Quarterly Reports on Form 10-Q for the quarterly periods in 2014 and (ii) management’s assessment of the effectiveness of internal controls over financial reporting as of December 31, 2014, we have not had sufficient time to fully remediate the aforementioned deficiencies and/or there was insufficient passage of time to evidence that the controls that were implemented during 2014 were effective.
While we continue with our efforts to remediate the identified weaknesses, we cannot assure you that our remediation efforts will be adequate to allow us to conclude that such controls will become effective during fiscal year 2015. We also cannot assure you that additional material weaknesses in our internal control over financial reporting will not arise or be identified in the future. We intend to continue our control remediation activities and also to continue to improve our operational, information technology, financial systems, and infrastructure, procedures and controls, as well as to continue to expand, train, retain, and manage our personnel who are essential to effective internal control. In doing so, we will continue to incur expenses and expend management time on compliance-related issues.
If we fail to successfully remediate our material weaknesses and implement appropriate controls, we may not be able to prevent or detect a material misstatement in our financial statements on a timely basis or at all. Such misstatements could result in a future restatement of our financial statements, could cause us to fail to meet our reporting obligations, or could cause investors to lose confidence in our reported financial information, leading to a decline in our stock price or litigation. Furthermore, our reputation could be harmed and our customers’ and partners’ confidence in us may be impaired, all of which could damage our business. For a discussion of the material weaknesses, please see Part II, Item 9A, “Controls and Procedures,” of this Form 10-K.

We cannot assure you that our financial statement preparation and reporting processes are or will be adequate or that future restatements will not be required.

While we have, following the restatement, significantly changed and enhanced our regular financial statement preparation and reporting processes (as described elsewhere in this report), as of the filing date of this report, previously identified material weaknesses in our internal control over financial reporting have not have been fully remediated and we continue to:
make changes to our finance organization;
adopt new accounting and reporting processes and procedures;
enhance our revenue recognition and other existing accounting policies and procedures;
introduce new or enhanced accounting systems and processes; and
improve our internal control over financial reporting.

We cannot assure you that the changes and enhancements made to date, or those that are still in process, are adequate, will operate as expected, or will be completed in a timely fashion (if still in process). As a result, we cannot assure you that we will not discover additional errors, that future financial reports will not contain material misstatements or omissions, that future restatements will not be required, that we will be able to timely complete our remaining SEC filings for periods subsequent to this report, or that we will be able to stay current with our reporting obligations in the future.

We have been named in class action lawsuits related to the circumstances that gave rise to our extended filing delay and recent restatement, and such delays and restatement continue to create the risk of further litigation against us, which could be expensive and could damage our business.

We and certain of our former executive officers have been named in class action lawsuits relating to our recent restatement. While we have reached an agreement in principle to settle the class action lawsuit, that settlement may not become final and the class action and any future litigation or action that may be filed against us, our current or former directors or officers may be time

20



consuming and expensive, and may distract management from the conduct of our business. Any such litigation or action could have a material adverse effect on our business, financial condition, and results of operations, and may expose us to costly indemnification obligations to current or former officers, directors, or other personnel, regardless of the outcome of such matter.

Following our disclosure of the accounting issues giving rise to our restatement we became subject to inquiries from the SEC and the Department of Justice. These government inquiries or any future inquiries to which we may become subject could result in penalties and/or other remedies that could have a material adverse effect on our financial condition and results of operation.

Following our disclosure of the accounting matters giving rise to the restatement we became subject to inquiries from the SEC and the Department of Justice. We have fully cooperated, and intend to continue to fully cooperate, if called upon to do so, with the SEC and the DOJ regarding this matter. We have not received any inquiries from either agency in the past 12 months but have no assurance that one or both will not further pursue the matter.

We cannot predict the outcome of any of the foregoing unresolved proceedings or whether we will face additional government inquiries, investigations, or other actions related to these or other matters. An adverse ruling in any SEC enforcement action or other regulatory proceeding could impose upon us fines, penalties, or other remedies, which could have a material adverse effect on our results of operations and financial condition. Even if we are successful in defending against an SEC enforcement action or other regulatory proceeding, if any, such an action or proceeding may be time consuming, expensive, and distracting from the conduct of our business and could have a material adverse effect on our business, financial condition, and results of operations. In the event of any such action or proceeding, we may also become subject to costly indemnification obligations to current or former officers, directors, or employees, who may not be covered by insurance.

We may not have sufficient insurance to cover our liability in any current or future litigation claims either due to coverage limits or as a result of insurance carriers seeking to deny coverage of such claims.

We face a variety of litigation-related liability risks, including liability for indemnification of (and advancement of expenses to) current and former directors, officers, and employees under certain circumstances, pursuant to our certificate of incorporation, bylaws, other applicable agreements, and/or Delaware law.

Our directors and officers were included in a director and officer liability insurance policy, which covers all our directors and officers. Our insurance coverage under our policies may not be adequate to cover any indemnification or other claims against us. In addition, the underwriters of our present coverage may seek to avoid coverage in certain circumstances based upon the terms of the respective policies, in which case we would have to self-fund any indemnification amounts owed to our directors and officers and bear any other uninsured liabilities.

If we do not have sufficient directors and officers insurance coverage under our present or historical insurance policies, or if our insurance underwriters are successful in avoiding coverage, our results of operations and financial condition could be materially adversely affected.

The previous delay in completing our financial statements, and any future failure to timely file required periodic reports with the SEC, may adversely affect our ability to raise, and the cost of raising, future capital.

Until we filed our quarterly report on Form 10-Q for the quarter ended September 30, 2014, which was filed on November 13, 2014, we were delinquent in our financial reporting obligations. Although we are current in our reporting obligations as of the date of filing of this annual report on Form 10-K, we will remain ineligible to use Form S-3 to register securities until we have timely filed all required periodic reports under the Exchange Act for at least twelve calendar months. During this time, we would need to use Form S-1 to register securities with the SEC (whether for capital raising transactions by us or to permit the resale of our securities by security holders), or issue such securities in private placements. Either of these alternatives entails greater costs, and may require more time to effect, than registering securities on Form S-3. As a result, our ability to raise capital, and the cost of raising future capital, could be adversely affected.

Risks Related to Our Stock

The market price of our common stock has been and may continue to be volatile.

21




As a result of the delay in filing our periodic reports with the SEC, our common stock was suspended from trading on NASDAQ effective February 25, 2014 and formally de-listed effective May 2, 2014. Our common stock was relisted for trading on NASDAQ on December 8, 2014. Prior to and during the suspension of trading from NASDAQ as well as following our relisting on NASDAQ, the market price of our common stock has experienced volatility. Our stock may continue to fluctuate substantially in the future in response to various factors, some of which are beyond our control. These factors include, but are not limited to:

period-to-period variations in our revenues or operating results;
our failure to accurately forecast revenues or operating results;
our ability to produce accurate and timely financial statements;
whether our results meet analysts’ expectations;
market reaction to significant corporate initiatives or announcements;
our ability to innovate;
our relative competitive position within our markets;
shifts in markets or demand for our solutions;
changes in our relationships with suppliers, resellers, distributors or customers;
our commencement of, or involvement in, litigation;
short sales, hedging or other derivative transactions involving shares of our common stock; and
shifts in financial markets.

Additionally, broader financial market and global economic trends may affect the market price of our common stock, regardless of our operating performance.

Provisions in our certificate of incorporation, bylaws and stockholder rights plan may have the effect of discouraging advantageous offers for our business or common stock and limit the price that investors might be willing to pay in the future for shares of our common stock.

Our certificate of incorporation, bylaws, and the provisions of the Delaware General Corporation Law include provisions that may have the effect of discouraging or preventing a change of control. In addition, we have a stockholder rights plan that may have the effect of discouraging or preventing a change of control. These provisions could limit the price that our stockholders might receive in the future for shares of our common stock.


ITEM 1B.
UNRESOLVED STAFF COMMENTS

None.


ITEM 2.
PROPERTIES

We lease approximately 173,000 square feet in two facilities in Burlington, Massachusetts for our principal corporate and administrative offices, as well as for significant R&D activities. The leases for these facilities expire in May 2020. We also lease 106,000 square feet in Mountain View, California, primarily for R&D, product management and manufacturing activities.

We lease approximately 26,000 square feet of office space in Iver Heath, United Kingdom for our European headquarters, which includes administrative, sales and support functions, and 41,000 square feet in Dublin, Ireland for the final assembly and distribution of our products in Europe. We also lease approximately 8,000 square feet in Singapore for our Asian headquarters.


22



We also lease office space for sales operations and research and development in several other domestic and international locations.


ITEM 3.
LEGAL PROCEEDINGS

Securities Class Action Lawsuits

In March 2013 and May 2013, two purported securities class action lawsuits were filed against us and certain of our former executive officers seeking unspecified damages in the U.S. District Court for the District of Massachusetts. In July 2013, the two cases were consolidated and the original plaintiffs agreed to act as co-plaintiffs in the consolidated case. In September 2013, the co-plaintiffs filed a consolidated amended complaint on behalf of those who purchased our common stock between October 23, 2008 and March 20, 2013. The consolidated amended complaint, which named us, certain of our current and former executive officers and our former independent accounting firm as defendants, purported to state a claim for violation of federal securities laws as a result of alleged violations of the federal securities laws pursuant to Sections 10(b) and 20(a) of the Exchange Act and Rule 10b-5 promulgated thereunder. In October 2013, we filed a motion to dismiss the consolidated amended complaint, resulting in the dismissal of some of the claims, and the dismissal of Mr. Hernandez and one of the two plaintiffs from the case. The discovery portion of the proceedings ended in October 2014 and the matter was scheduled for trial in March 2015. However, subsequent to the discovery portion of the trial we began settlement discussions with the remaining plaintiffs together with our former auditors, Ernst& Young, and in December 2014 we agreed in principle to settle the case for $2.6 million, of which our insurance company will pay $2.5 million and Ernst & Young, will pay the remainder.  The finalization of this settlement is subject to a number of procedural steps, including approval by the court, which likely will not be complete until later this year. Should the settlement not become final for any reason, the matter would proceed to trial.

Stockholder Derivative Litigation

In June 2013, a purported stockholder of the Company filed a derivative complaint against us as nominal defendant and certain of our current and former directors and officers in the U.S. District Court for the District of Massachusetts. The complaints alleged various violations of state law, including breaches of fiduciary duties, waste of corporate assets and unjust enrichment. The derivative complaint sought, inter alia, a monetary judgment, equitable and/or injunctive relief, restitution, disgorgement and a variety of purported corporate governance reforms. On October 30, 2013, the complaint was dismissed without prejudice. On November 26, 2013, our Board received a demand letter from the plaintiff in the dismissed derivative suit, demanding that our Board investigate, address and commence proceedings against certain of our directors, officers, employees and agents based on conduct identified in the dismissed complaint. In December 2013, our Board created a committee to conduct an investigation into the allegations in the demand letter. On October 29, 2014, our Board, based on the committee’s final recommendation, formally decided not to take action in response to the demand letter.

SEC Inquiry

In April and May 2013, we received a document preservation request and inquiry from the SEC Division of Enforcement and a federal grand jury subpoena from the Department of Justice requesting certain documents, including in particular documents related to our disclosures regarding our accounting review and revenue transactions. We produced documents responsive to such requests and provided regular updates to the authorities on our accounting evaluation and intend to continue to cooperate fully with the authorities should we receive any further inquiries or requests.  However, we have not received any such further inquiries or requests since briefing the authorities over twelve months ago and, although there can be no assurance, we believe that, based on information currently available, neither any further action in this matter nor the outcome of these inquiries will have a material adverse impact on our overall operations, financial condition or liquidity.

Other Litigation

Our industry is characterized by the existence of a large number of patents and frequent claims and litigation regarding patent and other intellectual property rights. In addition to the legal proceedings described above, we are involved in legal proceedings from time to time arising from the normal course of business activities, including claims of alleged infringement of intellectual property

23



rights and contractual, commercial, employee relations, product or service performance, or other matters. We do not believe these matters will have a material adverse effect on our financial statements. However, the outcome of legal proceedings and claims brought against us is subject to significant uncertainty. Therefore, our financial position or results of operations may be negatively affected by the unfavorable resolution of one or more of these proceedings for the period in which a matter is resolved. See Part I, Item 1A, “Risk Factors.” Our results could be materially adversely affected if we are accused of, or found to be, infringing third parties’ intellectual property rights.


ITEM 4.
MINE SAFETY DISCLOSURES

Not Applicable.


24



PART II

ITEM 5.
MARKET FOR REGISTRANT’S COMMON EQUITY AND RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Due to the restatement of our September 30, 2012 and prior financial statements, and the delay in filing our periodic reports with the SEC, we were unable to comply with the listing standards of NASDAQ and our common stock was suspended from trading effective February 25, 2014 and formally de-listed effective May 2, 2014. Following the suspension of trading, our common stock traded on the OTC Pink Tier under the symbol AVID. After we completed the restatement and became current in our SEC reporting obligations, our common stock resumed trading on the NASDAQ Global Select Market under the symbol AVID, effective December 8, 2014. The table below shows the high and low sales prices of our common stock for each calendar quarter of the fiscal years ended December 31, 2014 and 2013.
 
2014
 
2013
 
High
 
Low
 
High
 
Low
First Quarter
$8.29
 
$4.93
 
$7.99
 
$6.27
Second Quarter
$7.64
 
$6.10
 
$7.01
 
$5.88
Third Quarter
$10.55
 
$7.45
 
$6.30
 
$5.22
Fourth Quarter
$14.48
 
$9.25
 
$8.89
 
$6.16

On March 13, 2015, the last reported sale price of our common stock on the NASDAQ Global Select Market was $14.63 per share. The approximate number of holders of record of our common stock at March 13, 2015 was 325. This number does not include stockholders for whom shares were held in a “nominee” or “street” name.

We have never declared or paid cash dividends on our capital stock, and we do not anticipate paying any cash dividends in the foreseeable future. Our credit agreement with Wells Fargo prohibits us from declaring or paying any dividends in cash on our capital stock.

Stock Performance Graph

The following graph compares the cumulative stockholder return on our common stock during the period from December 31, 2009 through December 31, 2014 with the cumulative return during the period for:
the NASDAQ Composite Index (all companies traded on NASDAQ Capital, Global or Global Select Markets),
the Avid Peer Group Index (see details following the graph).
This comparison assumes the investment of $100 on December 31, 2009 in our common stock, the NASDAQ Market Index and the Avid Peer Group Index, and assumes that dividends, if any, were reinvested.


25



COMPARISON OF FIVE-YEAR CUMULATIVE TOTAL RETURN
Among Avid Technology, Inc., the NASDAQ Composite Index,
and the Avid Peer Group
Because our products and services are diverse, we do not believe any single published industry index is appropriate for comparing stockholder return. As a result, we compare our common stock returns to a peer group index, which was composed of NASDAQ-traded companies selected by Avid to best represent its peers based on various criteria, including industry classification, number of employees and market capitalization.

The composition of the Avid Peer Group Index is dictated by the peer group selected by the compensation committee of Avid’s board of directors for its reference in setting executive compensation.   The compensation committee seeks generally to include companies with similar product and service offerings to those of Avid while also achieving a balance of smaller and larger sized peer companies in terms of market capitalizations and revenue.

The Avid Peer Group Index for 2014 was composed of:  Dolby Laboratories, Inc., Harmonic Inc., Imation Corp., Mentor Graphics Corporation, National Instruments Corporation, Pegasystems Inc., Progress Software Corporation, QLogic Corporation, Quantum Corporation, RealD Inc., RealNetworks, Inc., Rovi Corporation, Synaptics, Inc., and Verint Systems Inc.

The Avid Peer Group Index is weighted based on market capitalization.



26



ITEM 6.           SELECTED FINANCIAL DATA

The selected condensed consolidated financial data below should be read in conjunction with Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” and Item 8, “Financial Statements and Supplementary Financial Information,” included elsewhere in this Form 10-K. The selected condensed consolidated financial data as of December 31, 2014, 2013 and 2012 and for the years ended December 31, 2014, 2013, 2012 and 2011 has been derived from our audited consolidated financial statements. The selected condensed consolidated financial data as of December 31, 2011 and 2010 and for the year ended December 31, 2010 has been derived from our unaudited consolidated financial statements, which were prepared on the same basis as our audited financial statements and reflect adjustments to our previously filed consolidated financial statements. See Note B to our Consolidated Financial Statements in Item 8 for information regarding changes to our revenue recognition policies and divestitures that may affect the comparability of the selected condensed consolidated financial data presented.

CONSOLIDATED STATEMENTS OF OPERATIONS DATA:
(in thousands, except per share data)
 
For the Year Ended December 31,
 
2014
 
2013
 
2012
 
2011
 
2010
Net revenues (1)
$
530,251

 
$
563,412

 
$
635,703

 
$
766,885

 
$
403,518

Cost of revenues
204,471

 
223,909

 
249,008

 
261,718

 
264,860

Gross profit
325,780

 
339,503

 
386,695

 
505,167

 
138,658

Operating expenses:
 
 
 
 
 
 
 
 
 
Research and development
90,390

 
95,249

 
98,879

 
111,129

 
113,682

Marketing and selling
133,049

 
133,890

 
153,481

 
163,204

 
161,963

General and administrative
81,181

 
77,578

 
52,066

 
50,732

 
56,479

Amortization of intangible assets
1,626

 
2,648

 
4,254

 
8,528

 
9,743

Restructuring (recoveries) costs, net
(165
)
 
5,370

 
24,838

 
6,534

 
20,167

Total operating expenses
306,081

 
314,735

 
333,518

 
340,127

 
362,034

Operating income (loss) from continuing operations
19,699

 
24,768

 
53,177

 
165,040

 
(223,376
)
Other expense, net
(2,783
)
 
(676
)
 
(2,041
)
 
(1,945
)
 
(513
)
Income (loss) from continuing operations before income taxes
16,916

 
24,092

 
51,136

 
163,095

 
(223,889
)
Provision for income taxes
2,188

 
2,939

 
4,049

 
635

 
1,796

Income (loss) from continuing operations, net of tax (1)
14,728

 
21,153

 
47,087

 
162,460

 
(225,685
)
Discontinued operations: (2)
 
 
 
 
 
 
 
 
 
Gain on divestiture of consumer business

 

 
37,972

 

 

Income from divested operations

 

 
7,832

 
63,907

 
38,150

Income from discontinued operations




45,804


63,907


38,150

Net income (loss)
$
14,728

 
$
21,153

 
$
92,891

 
$
226,367

 
$
(187,535
)
Income (loss) per share - basic:
 
 
 
 
 
 
 
 
 
Income (loss) per share from continuing operations, net of tax – basic
$
0.38

 
$
0.54

 
$
1.21

 
4.23

 
(5.96
)
Income per share from discontinued operations – basic

 

 
1.18

 
1.66

 
1.01

Net income (loss) per common share – basic
$
0.38

 
$
0.54

 
$
2.39

 
$
5.89

 
$
(4.95
)
Income (loss) per share - diluted:
 
 
 
 
 
 
 
 
 
Income (loss) per share from continuing operations, net of tax – diluted
$
0.38

 
$
0.54

 
$
1.21

 
4.22

 
(5.96
)
Income per share from discontinued operations – diluted

 

 
1.18

 
1.65

 
1.01

Net income (loss) per common share – diluted
$
0.38

 
$
0.54

 
$
2.39

 
$
5.87

 
$
(4.95
)
Weighted-average common shares outstanding – basic
39,147

 
39,044

 
38,804

 
38,435

 
37,895

Weighted-average common shares outstanding – diluted
39,267

 
39,070

 
38,836

 
38,534

 
37,895

  
(1)
Our revenues and operating results for the years ended December 31, 2014, 2013, 2012 and 2011 have been affected by the deferral of revenues from customer transactions occurring prior to 2011. On January 1, 2011, we adopted ASU No. 2009-14. Substantially all revenue arrangements prior to January 1, 2011 were generally recognized on a ratable basis over the service period of Implied Maintenance Release PCS. Subsequent to January 1, 2011, product revenues are generally recognized upon delivery and Implied Maintenance PCS and other service and support elements are recognized as services are rendered. See our policy on “Revenue Recognition” in Note B to our Consolidated Financial Statements in Item 8 of this Form 10-K for a further discussion of the effects of the changes to our revenue recognition policies on our financial results.

27



(2)
On July 2, 2012, we exited our consumer business through a sale of the assets of that business. The disposition of our consumer business qualified for presentation as discontinued operations. The accompanying financial statements have been reclassified for all periods presented to report the consumer business as a discontinued operation.


CONSOLIDATED BALANCE SHEET DATA:
(in thousands)
 
As of December 31,
 
2014
 
2013
 
2012
 
2011
 
2010
Cash, cash equivalents and marketable securities
$
25,056

 
$
48,203

 
$
70,390

 
$
32,855

 
$
42,782

Working capital deficit
(157,170
)
 
(133,009
)
 
(95,997
)
 
(227,544
)
 
(311,649
)
Total assets
191,599

 
235,142

 
294,361

 
340,590

 
784,643

Deferred revenues (current and long-term amounts)
414,840

 
466,832

 
558,485

 
697,124

 
937,624

Long-term liabilities
222,641

 
270,580

 
346,871

 
346,862

 
520,709

Total stockholders’ deficit
(341,070
)
 
(359,335
)
 
(385,592
)
 
(490,874
)
 
(310,335
)



ITEM 7.
MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

EXECUTIVE OVERVIEW

Our Company

We provide an open, integrated, and comprehensive technology platform, along with applications and services that enable the creation, distribution, and monetization of audio and video content. Specifically, we develop, market, sell, and support software and hardware for digital media content production, management and distribution. Digital media are video, audio or graphic elements in which the image, sound or picture is recorded and stored as digital values, as opposed to analog or tape-based signals. Our products are used in production and post-production facilities; film studios; network, affiliate, independent and cable television stations; recording studios; live-sound performance venues; advertising agencies; government and educational institutions; corporate communication departments; and by independent video and audio creative professionals, as well as aspiring professionals. Projects produced using our products include feature films, television programming, live events, news broadcasts, commercials, music, video and other digital media content.

Our mission is to create the most powerful and collaborative media network that enables the creation, distribution and monetization of the most inspiring content in the world. Guided by our Avid Everywhere strategic vision, we strive to deliver the industry’s most open, innovative and comprehensive media platform connecting content creation with collaboration, asset protection, distribution and consumption for the media in the world – from the most prestigious and award-winning feature films, music recordings, and television shows, to live concerts and news broadcasts. We have been honored over time for our technological innovation with 14 Emmy Awards, one Grammy Award, two Oscar statuettes and the first ever America Cinema Editors Technical Excellence Award.  Our solutions were used in all 2015 Oscar nominated films for Best Picture, Best Editing, Best Sound Editing and Best Sound Mixing.

Our strategy is built on three pillars, Avid Everywhere, The Avid Advantage and the Avid Customer Association. Avid Everywhere, introduced in April 2013, is our strategic vision for connecting creative professionals and media organizations with their audiences in a more powerful, efficient, collaborative, and profitable way. Central to the Avid Everywhere vision is the Avid MediaCentral Platform, an open, extensible, and customizable foundation that streamlines and simplifies workflows by tightly integrating all Avid or third party products and services that run on top of it. The platform provides secure and protected access, which enables the creation and delivery of content faster and easier through a set of modular application suites that together represent an open, integrated, and flexible media production and distribution environment for the media industry. The Avid Advantage complements Avid Everywhere by offering a new standard in service, support and education to enable our customers to derive more efficiency from their Avid investment. Finally, the Avid Customer Association, or ACA, created in September 2013, is an association run for and by a dedicated group of media community visionaries, thought leaders and users. The ACA is

28



designed to provide essential strategic leadership to the media industry, facilitate collaboration between Avid and key industry leaders and visionaries, and deepen relationships between our customers and us. As a part of our strategy, we are continuing to focus on cost reductions and are continually reviewing and implementing programs throughout the company to reduce costs, increase efficiencies and enhance our business, including by shifting a portion of our employee base to lower cost regions, such as our newly opened offices in Taiwan and the Philippines and other locations in the U.S. and elsewhere that we are planning to open.

Financial Summary

Revenues

Net revenues from continuing operations were $530.3 million, $563.4 million and $635.7 million, respectively, for 2014, 2013 and 2012. These decreases in revenues from continuing operations were primarily the result of lower amortization of deferred revenues (that is, lower recognition of revenue backlog) attributable to transactions executed on or before December 31, 2010, which, due to the adoption of ASU No. 2009-13, Multiple-Deliverable Revenue Arrangements, an amendment to ASC Topic 605, or ASU No. 2009-13, and ASU No. 2009-14, Certain Revenue Arrangements That Include Software Elements, an amendment to ASC Subtopic 985-605, as described further in “Critical Accounting Polices and Estimates,” resulted in many of our product orders qualifying for upfront revenue recognition; whereas, prior to adoption the same orders required ratable recognition over periods of up to eight years.  Revenue backlog associated with transactions executed prior to the adoption of ASU No. 2009-13 and ASU No. 2009-14 will continue to decline through 2016, before the balance is largely amortized, contributing less revenue each period. As a result of the change in accounting standards, even with consistent or increasing aggregate order values, we will experience significant declines in revenues, deferred revenues and revenue backlog in the coming years as revenue backlog associated with transactions occurring prior to January 1, 2011 decreases each year without being replaced by comparable revenue backlog from new transactions. After consideration of this change in accounting standards, there have been no other significant changes in our revenues.

Gross Margin Percentage

Our gross margin percentage from continuing operations increased meaningfully to 61.4% in 2014, compared to 60.3% for 2013. The increase in gross margin was primarily due to cost reduction initiatives, partially offset by the impact of the previously discussed lower amortization of deferred revenues attributable to transactions executed on or before December 31, 2010, which carry a 100% gross margin.

Operating Expenses

Our total operating expenses from continuing operations for 2014 decreased to $306.1 million, from $314.7 million for 2013. This decrease was largely due to decreased restructuring costs and research and development expenses in 2014, partially offset by an increase in our general and administrative expenses.

Liquidity

At December 31, 2014, our cash balance was $25.1 million, a decrease of $23.1 million from December 31, 2013. The decrease in our cash balance was largely the result of professional, legal and consulting fees related to the restatement of our September 30, 2012 and prior financial statements, and to a lesser extent, restructuring-related expenditures. At December 31, 2014, we had no outstanding borrowings under the Credit Agreement, with total availability of approximately $29.3 million. On August 29, 2014, we entered into an amendment to our Credit Agreement, extending the maturity date from October 1, 2014 to October 1, 2015. For a further discussion of our liquidity and cash flows, please see “Liquidity and Capital Resources.”



29



CRITICAL ACCOUNTING POLICIES AND ESTIMATES

Our consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States of America. The preparation of these financial statements requires us to make estimates and assumptions that affect the reported amounts of assets and liabilities and the disclosures of contingent assets and liabilities as of the date of the financial statements, and the reported amounts of revenues and expenses during the reporting period. We regularly reevaluate our estimates and judgments, including those related to the following: revenue recognition and allowances for sales returns and exchanges; stock-based compensation; income tax assets and liabilities; and restructuring charges and accruals. We base our estimates and judgments on historical experience and various other factors we believe to be reasonable under the circumstances, the results of which form the basis for judgments about the carrying values of assets and liabilities and the amounts of revenues and expenses that are not readily apparent from other sources. Actual results may differ from these estimates.

We believe the following critical accounting policies most significantly affect the portrayal of our financial condition and involve our most difficult and subjective estimates and judgments.

Revenue Recognition and Allowance for Sales Returns and Exchanges
 
General

We commence revenue recognition when persuasive evidence of an arrangement exists, delivery has occurred, the sales price is fixed or determinable and collection is reasonably assured. Generally, the products we sell do not require significant production, modification or customization. Installation of our products is generally routine, consists of implementation and configuration and does not have to be performed by us.

At the time of a sales transaction, we make an assessment of the collectability of the amount due from the customer. Revenues are recognized only if it is reasonably assured that collection will occur. When making this assessment, we consider customer credit-worthiness and historical payment experience. If it is determined from the outset of the arrangement that collection is not reasonably assured, revenues are recognized on a cash basis, provided that all other revenue recognition criteria are satisfied. At the outset of the arrangement, we also assess whether the fee associated with the order is fixed or determinable and free of contingencies or significant uncertainties. When assessing whether the fee is fixed or determinable, we consider the payment terms of the transaction, our collection experience in similar transactions without making concessions, and our involvement, if any, in third-party financing transactions, among other factors. If the fee is not fixed or determinable, revenues are recognized only as payments become due from the customer, provided that all other revenue recognition criteria are met. If a significant portion of the fee is due after our normal payment terms, we evaluate whether we have sufficient history of successfully collecting past transactions with similar terms without offering concessions. If that collection history is sufficient, revenue recognition commences, upon delivery of the products, assuming all other revenue recognition criteria are satisfied. If we were to make different judgments or assumptions about any of these matters, it could cause a material increase or decrease in the amount of revenues reported in a particular period.

We often receive multiple purchase orders or contracts from a single customer or a group of related customers that are evaluated to determine if they are, in effect, part of a single arrangement. In situations when we have concluded that two or more orders with the same customer are so closely related that they are, in effect, parts of a single arrangement, we account for those orders as a single arrangement for revenue recognition purposes. In other circumstances, when we have concluded that two or more orders with the same customer are independent buying decisions, such as an earlier purchase of a product and a subsequent purchase of a software upgrade or maintenance contract, we account for those orders as separate arrangements for revenue recognition purposes.

For many of our products, there has been an ongoing practice of Avid making available at no charge to customers minor feature and compatibility enhancements as well as bug fixes on a when-and-if-available basis, or collectively Software Updates, for a period of time after initial sales to end users. The implicit obligation to make such Software Updates available to customers over a period of time represents implied post-contract customer support, which is deemed to be a deliverable in each arrangement and is accounted for as a separate element (referred to by us as Implied Maintenance Release PCS).

We enter into certain contractual arrangements that have multiple elements, one or more of which may be delivered subsequent to the delivery of other elements. These multiple-deliverable arrangements may include products, support, training, professional services and Implied Maintenance Release PCS. For these multiple-element arrangements, we allocate revenue to each

30



deliverable of the arrangement based on the relative selling prices of the deliverables. In such circumstances, we first determine the selling price of each deliverable based on (i) VSOE of fair value if that exists; (ii) third-party evidence of selling price, or TPE, when VSOE does not exist; or (iii) best estimate of the selling price, or BESP, when neither VSOE nor TPE exists. Revenue is then allocated to the non-software deliverables as a group and to the software deliverables as a group using the relative selling prices of each of the deliverables in the arrangement based on the selling price hierarchy. Our process for determining BESP for deliverables for which VSOE or TPE does not exist involves significant management judgment. In determining BESP, we consider a number of data points, including:

the pricing established by management when setting prices for deliverables that are intended to be sold on a standalone basis;
contractually stated prices for deliverables that are intended to be sold on a standalone basis;
the pricing of standalone sales that may not qualify as VSOE of fair value due to limited volumes or variation in prices; and
other pricing factors, such as the geographical region in which the products are sold and expected discounts based on the customer size and type.

In determining a BESP for Implied Maintenance Release PCS, which we do not sell separately, we consider (i) the service period for the Implied Maintenance Release PCS, (ii) the differential in value of the Implied Maintenance Release PCS deliverable compared to a full support contract, (iii) the likely list price that would have resulted from our established pricing practices had the deliverable been offered separately, and (iv) the prices a customer would likely be willing to pay.

We estimate the service period of Implied Maintenance Release PCS based on the length of time the product version purchased by the customer is planned to be supported with Software Updates. If facts and circumstances indicate that the original service period of Implied Maintenance Release PCS for a product has changed significantly after original revenue recognition has commenced, we will modify the remaining estimated service period accordingly and recognize the then-remaining deferred revenue balance over the revised service period.

We have established VSOE of fair value for all professional services and training and for some of our support offerings. Our policy for establishing VSOE of fair value consists of evaluating standalone sales, where available, to determine if a substantial portion of the transactions fall within a reasonable range. If a sufficient volume of standalone sales exist and the standalone pricing for a substantial portion of the transactions falls within a reasonable range, management concludes that VSOE of fair value exists.

The following table sets forth our determination of the estimated range of BESP of Implied Maintenance Release PCS, stated as a percentage of the BESP of the underlying product being sold, and the estimated range of service periods of Implied Maintenance Release PCS by product group for all periods presented in the consolidated financial statements.

Product Group
 
BESP of Implied Maintenance Release PCS (as a % of Product BESP)
 
Estimated Service Period
Professional video creative tools
 
1% to 13%
 
18 to 72 months
Video storage and workflow solutions
 
1% to 2%
 
72 months
Media management solutions
 
1% to 3%
 
12 to 72 months
Consumer video-editing software
 
1% to 6%
 
12 to 36 months
Digital audio software and workstations solutions
 
1% to 8%
 
12 to 36 months
Control surfaces, consoles and live-sound systems
 
1% to 5%
 
12 to 96 months
Notation software
 
4% to 8%
 
12 to 46 months
Consumer audio products
 
2%
 
24 months


31



In accordance with ASU No. 2009-14, we exclude from the scope of software revenue recognition requirements our sales of tangible products that contain both software and non-software components that function together to deliver the essential functionality of the tangible products. We adopted ASU No. 2009-13 and ASU No. 2009-14 prospectively on January 1, 2011 for new and materially modified arrangements originating after December 31, 2010.

Prior to our adoption of ASU No. 2009-14, we primarily recognized revenues using the revenue recognition criteria of Accounting Standards Codification, or ASC, Subtopic 985-605, Software-Revenue Recognition. As a result of our adoption of ASU No. 2009-14 on January 1, 2011, a majority of our products are now considered non-software elements under GAAP, which excludes them from the scope of ASC Subtopic 985-605 and includes them within the scope of ASC Topic 605, Revenue Recognition. Because we had not been able to establish VSOE of fair value for Implied Maintenance Release PCS, as described further below, substantially all revenue arrangements prior to January 1, 2011 were recognized on a ratable basis over the service period of Implied Maintenance Release PCS. Subsequent to January 1, 2011 and the adoption of ASU No. 2009-14, we determine a relative selling price for all elements of the arrangement through the use of BESP, as VSOE and TPE are typically not available, resulting in revenue recognition upon delivery of arrangement consideration attributable to product revenue, provided all other criteria for revenue recognition are met, and revenue recognition of Implied Maintenance Release PCS and other service and support elements over time as services are rendered.

The timing of revenue recognition of customer arrangements follows a number of different accounting models determined by the characteristics of the arrangement, and that timing can vary significantly from the timing of related cash payments due from customers. One significant factor affecting the timing of revenue recognition is the determination of whether each deliverable in the arrangement is considered to be a software deliverable or a non-software deliverable. For transactions occurring after January 1, 2011, our revenue recognition policies have generally resulted in the recognition of approximately 70% of billings as revenue in the year of billing, and prior to January 1, 2011, the previously applied revenue recognition policies resulted in the recognition of approximately 30% of billings as revenue in the year of billing. We expect this trend to continue in future periods.

Revenue Recognition of Non-Software Deliverables

Revenue from products that are considered non-software deliverables is recognized upon delivery of the product to the customer. Products are considered delivered to the customer once they have been shipped and title and risk of loss has been transferred. For most of our product sales, these criteria are met at the time the product is shipped. Revenue from support that is considered a non-software deliverable is initially deferred and is recognized ratably over the contractual period of the arrangement, which is generally twelve months. Professional services and training services are typically sold to customers on a time and materials basis. Revenue from professional services and training services that are considered non-software deliverables is recognized for these deliverables as services are provided to the customer. Revenue for Implied Maintenance Release PCS that is considered a non-software deliverable is recognized ratably over the service period of Implied Maintenance Release PCS, which ranges from 1 to 8 years.

Revenue Recognition of Software Deliverables

We recognize the following types of elements sold using software revenue recognition guidance: (i) software products and software upgrades, when the software sold in a customer arrangement is more than incidental to the arrangement as a whole and the product does not contain hardware that functions with the software to provide essential functionality, (ii) initial support contracts where the underlying product being supported is considered to be a software deliverable, (iii) support contract renewals, and (iv) professional services and training that relate to deliverables considered to be software deliverables. Because we do not have VSOE of the fair value of our software products, we are permitted to account for our typical customer arrangements that include multiple elements using the residual method. Under the residual method, the VSOE of fair value of the undelivered elements (which could include support, professional services or training, or any combination thereof) is deferred and the remaining portion of the total arrangement fee is recognized as revenue for the delivered elements. If evidence of the VSOE of fair value of one or more undelivered elements does not exist, revenues are deferred and recognized when delivery of those elements occurs or when VSOE of fair value can be established. VSOE of fair value is typically based on the price charged when the element is sold separately to customers. We are unable to use the residual method to recognize revenues for most arrangements that include products that are software deliverables under GAAP since VSOE of fair value does not exist for Implied Maintenance Release PCS elements, which are included in a majority of our arrangements.

For software products that include Implied Maintenance Release PCS, an element for which VSOE of fair value does not exist, revenue for the entire arrangement fee, which could include combinations of product, professional services, training and support,

32



is recognized ratably as a group over the longest service period of any deliverable in the arrangement, with recognition commencing on the date delivery has occurred for all deliverables in the arrangement (or begins to occur in the case of professional services, training and support). Standalone sales of support contracts are recognized ratably over the service period of the product being supported.

From time to time, we offer certain customers free upgrades or specified future products or enhancements. When a software deliverable arrangement contains an Implied Maintenance Release PCS deliverable, revenue recognition of the entire arrangement will only commence when any free upgrades or specified future products or enhancements have been delivered, assuming all other products in the arrangement have been delivered and all services, if any, have commenced.

Other Revenue Recognition Policies

In a limited number of arrangements, the professional services and training to be delivered are considered essential to the functionality of our software products. If services sold in an arrangement are deemed to be essential to the functionality of the software products, the arrangement is accounted for using contract accounting. As we have concluded that we cannot reliably estimate our contract costs, we use the completed contract method of contract accounting. The completed contract method of accounting defers all revenue and costs until the date that the products have been delivered and professional services, exclusive of post-contract customer support, have been completed. Deferred costs related to fully deferred contracts are recorded as a component of inventories in the consolidated balance sheet, and generally all other costs of sales are recognized when revenue recognition commences.

We record a provision for estimated returns and other allowances as a reduction of revenues in the same period that related revenues are recorded. Use of management estimates is required in connection with establishing and maintaining a sales allowance for expected returns and other credits, including rebates and returns. In making these estimates, we analyze historical returns and credits and other relevant factors. While we believe we can make reliable estimates regarding these matters, these estimates are inherently subjective. The amount and timing of our revenues for any period may be affected if actual product returns prove to be materially different from our estimates.

We record as revenues all amounts billed to customers for shipping and handling costs and record the actual shipping costs as a component of cost of revenues. Reimbursements received from customers for out-of-pocket expenses are recorded as revenues, with related costs recorded as cost of revenues. We present revenues net of any taxes collected from customers and remitted to government authorities.

In the consolidated statements of operations, we classify revenues as product revenues or services revenues. For multiple element arrangements that include both product and service elements, including Implied Maintenance Release PCS, we evaluate available indicators of fair value and apply our judgment to reasonably classify the arrangement fee between product revenues and services revenues. The amount of multiple element arrangement fees classified as product and services revenues based on management estimates of fair value when VSOE of fair value for all elements of an arrangement does not exist could differ from amounts classified as product and service revenues if VSOE of fair value for all elements existed.

Stock-Based Compensation

We account for stock-based compensation at fair value. The vesting of stock options and restricted stock awards may be based on time, performance, market conditions, or a combination of performance and market conditions. In the future, we may grant stock awards, options, or other equity-based instruments allowed by our stock-based compensation plans, or a combination thereof, as part of our overall compensation strategy.

We generally use the Black-Scholes option pricing model to estimate the fair value of stock option grants with time-based vesting. The Black-Scholes option pricing model relies on a number of key assumptions to calculate estimated fair values. Our assumed dividend yield of zero is based on the fact that we have never paid cash dividends, we have no present intention to pay cash dividends and our current credit agreement precludes us from paying dividends. Our expected stock-price volatility assumption is based on recent (six-month trailing) implied volatility of the traded options. These calculations are performed on exchange-traded options of our common stock based on the implied volatility of long-term (9- to 39-month term) exchange-traded options. During 2014 we changed the method of calculating the expected volatility. The expected volatility is now based on actual historic stock volatility for periods equivalent to the expected term of the award. The assumed risk-free interest rate is the U.S. Treasury security rate with a term equal to the expected life of the option. The assumed expected life is based on company-specific

33



historical experience, considering the exercise behavior of past grants and models the pattern of aggregate exercises. The fair values of restricted stock and restricted stock unit awards with time-based vesting are based on the intrinsic values of the awards at the date of grant as these awards have a purchase price of $0.01 per share.

We have also issued stock option grants or restricted stock unit awards with vesting based on market conditions, which historically included Avid’s stock price; or performance conditions, generally our return on equity or operating margin. The fair values and derived service periods for all grants that include vesting based on market conditions are estimated using the Monte Carlo simulation method. For stock option grants that include vesting based on performance conditions, the fair values are estimated using the Black-Scholes option pricing model. For restricted stock unit awards that include vesting based on performance conditions, the fair values are estimated based on the intrinsic values of the awards at the date of grant as these awards have a purchase price of $0.01 per share.

Income Tax Assets and Liabilities

We record deferred tax assets and liabilities based on the net tax effects of tax credits, operating loss carryforwards and temporary differences between the carrying amounts of assets and liabilities for financial reporting purposes compared to the amounts used for income tax purposes. We regularly review our deferred tax assets for recoverability with consideration for such factors as historical losses, projected future taxable income and the expected timing of the reversals of existing temporary differences. A valuation allowance is recorded when it is more likely than not that some portion or all of the deferred tax assets will not be realized. Based on the magnitude of our gross deferred tax assets, which totaled approximately $404 million at December 31, 2014, and our level of historical U.S. losses, we have determined that the uncertainty regarding the realization of these assets is sufficient to warrant the need for a full valuation allowance against our U.S. deferred tax assets. We also determined that a valuation allowance is warranted on a portion of our foreign deferred tax assets.

Our assessment of the valuation allowance on our U.S. and foreign deferred tax assets could change in the future based on our levels of pre-tax income and other tax-related adjustments. Reversal of the valuation allowance in whole or in part would result in a non-cash reduction in income tax expense during the period of reversal. To the extent some or all of our valuation allowance is reversed, future financial statements would reflect an increase in non-cash income tax expense until such time as our deferred tax assets are fully utilized.

The amount of income taxes we pay is subject to our interpretation of applicable tax laws in the jurisdictions in which we file. We have taken and will continue to take tax positions based on our interpretation of such tax laws. There can be no assurance that a taxing authority will not have a different interpretation of applicable law and assess us with additional taxes. Should we be assessed with additional taxes, it could have a negative impact on our results of operations or financial condition.

We account for uncertainty in income taxes recognized in our financial statements by applying a two-step process to determine the amount of tax benefit to be recognized. First, the tax position must be evaluated to determine the likelihood that it will be sustained upon examination by the taxing authorities, based on the technical merits of the position. If the tax position is deemed more likely than not to be sustained, the tax position is then assessed to determine the amount of benefit to recognize in the financial statements. The amount of the benefit that may be recognized is the largest amount that has a greater than 50% likelihood of being realized upon ultimate settlement. Our provision for income taxes includes the effects of any resulting tax
reserves, referred to as unrecognized tax benefits, that are considered appropriate as well as the related net interest and penalties. At December 31, 2014 and 2013, the amounts recorded for unrecognized tax benefits in our consolidated balance sheets totaled $25.8 million and $24.7 million, respectively, including interest and penalties. If these benefits had been recognized, a reduction of our income tax provision of $0.8 million would have resulted at both December 31, 2014 and 2013.

Restructuring Charges and Accruals

We recognize facility-related restructuring charges upon exiting all or a portion of a leased facility and meeting cease-use and other requirements. The amount of restructuring charges is based on the fair value of the lease obligation for the abandoned space, which includes a sublease assumption that could be reasonably obtained.

Based on our policies for the calculation and payment of severance benefits, we account for employee-related restructuring charges as an ongoing benefit arrangement in accordance with ASC Topic 712, Compensation - Nonretirement Postemployment

34



Benefits. Severance-related charges are accrued when it is determined that a liability has been incurred, which is when the expected severance payments are probable and can be reasonably estimated.

Restructuring charges require significant estimates and assumptions, including sub-lease income and severance period assumptions. Our estimates involve a number of risks and uncertainties, some of which are beyond our control, including future real estate market conditions and our ability to successfully enter into subleases or termination agreements with terms as favorable as those assumed when arriving at our estimates. We monitor these estimates and assumptions on at least a quarterly basis for changes in circumstances and any corresponding adjustments to the accrual are recorded in our statement of operations in the period when such changes are known.


35



RESULTS OF OPERATIONS

The following table sets forth certain items from our consolidated statements of operations as a percentage of net revenues from continuing operations for the periods indicated:
 
Year Ended December 31,
 
2014
 
2013
 
2012
Net revenues:
 
 
 
 
 
Product revenues
71.4
 %
 
70.2
 %
 
75.3
 %
Services revenues
28.6
 %
 
29.8
 %
 
24.7
 %
Total net revenues
100.0
 %
 
100.0
 %
 
100.0
 %
Cost of revenues
38.6
 %
 
39.7
 %
 
39.2
 %
Gross margin
61.4
 %
 
60.3
 %
 
60.8
 %
Operating expenses:
 
 
 
 
 
Research and development
17.0
 %
 
16.9
 %
 
15.6
 %
Marketing and selling
25.1
 %
 
23.8
 %
 
24.1
 %
General and administrative
15.3
 %
 
13.8
 %
 
8.2
 %
Amortization of intangible assets
0.3
 %
 
0.5
 %
 
0.7
 %
Restructuring costs, net
 %
 
1.0
 %
 
3.9
 %
Total operating expenses
57.7
 %
 
55.9
 %
 
52.5
 %
Operating income
3.7
 %
 
4.4
 %
 
8.3
 %
Interest and other income (expense), net
(0.5
)%
 
(0.1
)%
 
(0.3
)%
Income from continuing operations before income taxes
3.2
 %
 
4.3
 %
 
8.0
 %
Provision for income taxes
0.4
 %
 
0.5
 %
 
0.6
 %
Income from continuing operations, net of tax
2.8
 %
 
3.8
 %
 
7.4
 %
Income from discontinued operations
 %
 
 %
 
7.2
 %
Net income
2.8
 %
 
3.8
 %
 
14.6
 %


Net Revenues

Our net revenues are derived mainly from sales of video and audio hardware and software products and solutions for digital media content creation, distribution and monetization, and related professional services and maintenance contracts.

Net Revenues from Continuing Operations for the Years Ended December 31, 2014 and 2013
(dollars in thousands)
 
2014
 
Change
 
2013
 
Net Revenues
 
$
 
%
 
Net Revenues
Video products and solutions
$
233,464

 
$
(9,709
)
 
(4.0)%
 
$
243,173

Audio products and solutions
145,163

 
(7,195
)
 
(4.7)%
 
152,358

     Total products and solutions
378,627

 
(16,904
)
 
(4.3)%
 
395,531

Services
151,624

 
(16,257
)
 
(9.7)%
 
167,881

Total net revenues
$
530,251

 
$
(33,161
)
 
(5.9)%
 
$
563,412



36



Net Revenues from Continuing Operations for the Years Ended December 31, 2013 and 2012
(dollars in thousands)
 
2013
 
Change
 
2012
 
Net Revenues
 
$
 
%
 
Net Revenues
Video products and solutions
$
243,173

 
$
(33,736
)
 
(12.2)%
 
$
276,909

Audio products and solutions
152,358

 
(49,563
)
 
(24.5)%
 
201,921

     Total products and solutions
395,531

 
(83,299
)
 
(17.4)%
 
478,830

Services
167,881

 
11,008

 
7.0%
 
156,873

Total net revenues
$
563,412

 
$
(72,291
)
 
(11.4)%
 
$
635,703


The following table sets forth the percentage of our net revenues from continuing operations attributable to geographic regions for the periods indicated:
 
Year Ended December 31,
 
2014
 
2013
 
2012
United States
36%
 
39%
 
39%
Other Americas
9%
 
7%
 
7%
Europe, Middle East and Africa
41%
 
38%
 
39%
Asia-Pacific
14%
 
16%
 
15%

Video Products and Solutions Revenues

2014 Compared to 2013

Video products and solutions revenues from continuing operations decreased $9.7 million, or 4.0%, for 2014, compared to 2013. The decrease in video revenues was primarily the result of lower amortization of deferred revenues (that is, lower recognition of revenue backlog) attributable to transactions executed on or before December 31, 2010, which, due to the adoption of ASU No. 2009-13 and ASU No. 2009-14 as described further in “Critical Accounting Polices and Estimates,” resulted in many of our product orders qualifying for upfront revenue recognition; whereas, prior to adoption the same orders required ratable recognition over periods of up to eight years.  Revenue backlog associated with transactions executed prior to the adoption of ASU No. 2009-13 and ASU No. 2009-14 will continue to decline through 2016, before the balance is largely amortized, contributing less revenue each period.

2013 Compared to 2012

Video products and solutions revenues from continuing operations decreased $33.7 million, or 12.2%, for 2013, compared to 2012. In 2013, compared to 2012, revenues from our video creative tools, storage and workflow solutions, and media management solutions all decreased. The decrease in video revenues was primarily the result of the previously discussed lower amortization of deferred revenues attributable to transactions executed on or before December 31, 2010.

Audio Products and Solutions Revenues

2014 Compared to 2013

Audio products and solutions revenues from continuing operations decreased $7.2 million, or 4.7%, for 2014, compared to 2013. The decrease in audio revenues was primarily the result of the previously discussed lower amortization of deferred revenues attributable to transactions executed on or before December 31, 2010.

2013 Compared to 2012

Audio products and solutions revenues from continuing operations decreased $49.6 million, or 24.5%, for 2013, compared to 2012. In 2013, compared to 2012, revenues from our digital audio software and workstation solutions and control surfaces,

37



consoles and live-sound systems decreased. The decrease in audio revenues was primarily the result of the previously discussed lower amortization of deferred revenues attributable to transactions executed on or before December 31, 2010.

Services Revenues

2014 Compared to 2013

Services revenues are derived primarily from maintenance contracts, as well as professional services and training. The $16.3 million, or 9.7%, decrease in services revenues from continuing operations for 2014, compared to 2013, was primarily the result of the previously discussed lower amortization of deferred revenues attributable to transactions executed on or before December 31, 2010.

2013 Compared to 2012

The $11.0 million, or 7.0%, increase in services revenues from continuing operations for 2013, compared to 2012, was primarily the result of increased maintenance revenues, driven by maintenance contracts attached to new product sales. During 2013, we continued to include a one-year maintenance contract with certain product sales, which we began during 2011. While this has had a positive impact on 2012 and 2013 maintenance revenues, the effect on future maintenance revenues will depend on the level of renewal rates on these contracts.

Revenue Backlog

At December 31, 2014, we had revenue backlog of approximately $540 million, compared to $559 million at December 31, 2013. Revenue backlog, as we define it, consists of firm orders received and includes both (i) orders where the customer has paid in advance of our performance obligations being fulfilled, which are reflected as deferred revenues in our balance sheet and (ii) orders for future product deliveries or services that have not yet been invoiced by us. Revenue backlog associated with arrangement consideration paid in advance primarily consists of deferred revenue related to (i) the undelivered portion of annual support contracts, (ii) software arrangements for which VSOE of fair value of undelivered elements does not exist, (iii) Implied Maintenance Release PCS performance obligations, and (iv) in-process installations that are subject to substantive customer acceptance provisions. Revenue backlog associated with orders for future product deliveries and services where cash has not been received primarily consists of (i) product orders received but not yet shipped, (ii) professional services not yet rendered and (iii) future years of multi-year support agreements not yet billed.

A meaningful, albeit rapidly declining portion of our revenue backlog is attributable to deferred revenue related to transactions that occurred prior to our January 1, 2011 adoption of the accounting guidance related to multiple-element arrangements (ASU No. 2009-13) and the accounting guidance related to differentiating software and hardware in a combined product offering (ASU No. 2009-14). Prior to our adoption of ASU No. 2009-14, the majority of our products were subject to software revenue recognition guidance that required us to recognize revenue ratably for periods as long as eight years from product delivery because we did not have VSOE of fair value for the Implied Maintenance Release PCS deliverable included in most of our customer arrangements. Upon adoption of ASU No. 2009-14, most of our products are now excluded from the scope of software revenue recognition, resulting in recognition of arrangement consideration upon product shipments (based on management’s best estimate of selling price) with only the arrangement consideration attributable to Implied Maintenance Release PCS being recognized ratably over an extended period of time. As a result of the change in accounting standards, even with consistent or increasing aggregate order values, we will experience significant declines in revenues, deferred revenues and revenue backlog in the coming years as revenue backlog associated with transactions occurring prior to January 1, 2011 decreases each quarter without being replaced by comparable revenue backlog from new transactions.

The expected timing of recognition of revenue backlog as revenue in the future is as follows as of December 31, 2014 (in thousands):

38



 
For the Year Ending December 31,
 
 
 
2015
 
2016
 
2017
 
2018
 
2019
 
Thereafter
 
Total
Orders executed prior to January 1, 2011
$
58,543

 
$
24,954

 
$
955

 
$
145

 
$

 
$

 
$
84,597

Orders executed or materially modified on or after January 1, 2011
230,009

 
125,908

 
61,244

 
26,128

 
11,294

 
330

 
454,913

 
$
288,552

 
$
150,862

 
$
62,199

 
$
26,273

 
$
11,294

 
$
330

 
$
539,510


Orders included in revenue backlog may be reduced, canceled or deferred by our customers. The expected timing of the recognition of revenue backlog as revenue is based on our current estimates and could change based on a number of factors, including (i) the timing of delivery of products and services, (ii) customer cancellations or change orders, or (iii) changes in the estimated period of time Implied Maintenance Release PCS is provided to customers. As there is no industry standard definition of revenue backlog, our reported revenue backlog may not be comparable with other companies. Revenue backlog as of any particular date should not be relied upon as indicative of our net revenues for any future period.

Cost of Revenues, Gross Profit and Gross Margin Percentage

Cost of revenues consists primarily of costs associated with:
procurement of components and finished goods;
assembly, testing and distribution of finished products;
warehousing;
customer support related to maintenance;
royalties for third-party software and hardware included in our products;
amortization of technology; and
providing professional services and training.

Amortization of technology included in cost of revenues represents the amortization of developed technology assets acquired as part of acquisitions and is described further in the Amortization of Intangible Assets section below.

Costs of Revenues for the Years Ended December 31, 2014 and 2013
(dollars in thousands)
 
2014
 
Change
 
2013
 
Costs
 
$
 
%
 
Costs
Products
$
143,765

 
$
(15,499
)
 
(9.7)%
 
$
159,264

Services
60,656

 
(2,521
)
 
(4.0)%
 
63,177

Amortization of intangible assets
50

 
(1,418
)
 
(96.6)%
 
1,468

    Total cost of revenues
204,471

 
(19,438
)
 
(8.7)%
 
223,909

 
 
 
 
 
 
 
 
Gross profit
$
325,780

 
$
(13,723
)
 
(4.0)%
 
$
339,503



39



Costs of Revenues for the Years Ended December 31, 2013 and 2012
(dollars in thousands)
 
2013
 
Change
 
2012
 
Costs
 
$
 
%
 
Costs
Products
$
159,264

 
$
(23,500
)
 
(12.9)%
 
$
182,764

Services
63,177

 
(493
)
 
(0.8)%
 
63,670

Amortization of intangible assets
1,468

 
(1,106
)
 
(43.0)%
 
2,574

    Total costs of revenues
223,909

 
(25,099
)
 
(10.1)%
 
249,008

 
 
 
 
 
 
 
 
Gross profit
$
339,503

 
$
(47,192
)
 
(12.2)%
 
$
386,695


Gross Margin Percentage

Gross margin percentage, which is net revenues less costs of revenues divided by net revenues, fluctuates based on factors such as the mix of products sold, the cost and proportion of third-party hardware and software included in the systems sold, the offering of product upgrades, price discounts and other sales-promotion programs, the distribution channels through which products are sold, the timing of new product introductions, sales of aftermarket hardware products such as disk drives and currency exchange-rate fluctuations. Our total gross margin percentage for 2014 increased slightly to 61.4%, from 60.3% for 2013. The increase in gross margin was primarily due to the cost reduction initiatives, partially offset by the impact of the previously discussed lower amortization of deferred revenues attributable to transactions executed on or before December 31, 2010.

Gross Margin % for the Years Ended December 31, 2014, 2013 and 2012
 
2014 Gross
Margin %
 
(Decrease) Increase in
Gross Margin %
 
2013 Gross
Margin %
 
(Decrease) Increase in
Gross Margin %
 
2012 Gross
Margin %
Products
62.0%
 
2.3%
 
59.7%
 
(2.1)%
 
61.8%
Services
60.0%
 
(2.4)%
 
62.4%
 
3.0%
 
59.4%
Total Gross Margin
61.4%
 
1.1%
 
60.3%
 
(0.5)%
 
60.8%

2014 Compared to 2013

The increase in products gross margin percentage from continuing operations for 2014, compared to 2013, was driven by the cost reduction initiatives, partially offset by the impact of the previously discussed lower amortization of deferred revenues attributable to transactions executed on or before December 31, 2010.

The decrease in services gross margin percentage from continuing operations for 2014, compared to 2013, was due to lower services revenues on relatively fixed costs. As previously discussed, the revenues recognized from the amortization of deferred revenues (that is, the recognition of revenue backlog) attributable to transactions executed on or before December 31, 2010 will continue to decline until the related deferred revenue balance are largely amortized by 2016. These revenues have 100% margins, because the timing of the recognition of the deferred costs did not change as a result of our restatement, and our gross margin percentages will be negatively impacted as these revenues decline.

2013 Compared to 2012

Our products gross margin percentage from continuing operations for 2013, compared to 2012, was negatively impacted by the effect of the amortization of our deferred revenue balances as discussed above.

The increase in services gross margin percentage from continuing operations for 2013, compared to 2012, was driven by a significant increase in services revenues from maintenance contracts, which have higher gross margins than professional services and training, as well as margin improvement for professional services resulting from enhanced productivity.


40



Operating Expenses and Operating Income

Operating Expenses and Operating Income for the Years Ended December 31, 2014 and 2013
(dollars in thousands)
 
2014
 
Change
 
2013
 
Expenses
 
$
 
%
 
Expenses
Research and development expenses
$
90,390

 
$
(4,859
)
 
(5.1)%
 
$
95,249

Marketing and selling expenses
133,049

 
(841
)
 
(0.6)%
 
133,890

General and administrative expenses
81,181

 
3,603

 
4.6%
 
77,578

Amortization of intangible assets
1,626

 
(1,022
)
 
(38.6)%
 
2,648

Restructuring (recoveries) costs, net
(165
)
 
(5,535
)
 
(103.1)%
 
5,370

Total operating expenses
$
306,081

 
$
(8,654
)
 
(2.7)%
 
$
314,735

 
 
 
 
 
 
 
 
Operating income
$
19,699

 
$
(5,069
)
 
(20.5)%
 
$
24,768


Operating Expenses and Operating Income for the Years Ended December 31, 2013 and 2012
(dollars in thousands)
 
2013
 
Change
 
2012
 
Expenses
 
$
 
%
 
Expenses
Research and development expenses
$
95,249

 
$
(3,630
)
 
(3.7)%
 
$
98,879

Marketing and selling expenses
133,890

 
(19,591
)
 
(12.8)%
 
153,481

General and administrative expenses
77,578

 
25,512

 
49.0%
 
52,066

Amortization of intangible assets
2,648

 
(1,606
)
 
(37.8)%
 
4,254

Restructuring costs, net
5,370

 
(19,468
)
 
(78.4)%
 
24,838

Total operating expenses
$
314,735

 
$
(18,783
)
 
(5.6)%
 
$
333,518

 
 
 
 
 
 
 
 
Operating income
$
24,768

 
$
(28,409
)
 
(53.4)%
 
$
53,177


Research and Development Expenses

Research and development, or R&D, expenses include costs associated with the development of new products and the enhancement of existing products, and consist primarily of employee salaries and benefits; facilities costs; depreciation; costs for consulting and temporary employees; and prototype and other development expenses. R&D expenses decreased $4.9 million, or 5.1%, during the year ended December 31, 2014, compared to 2013, primarily due to decreased salary expenses on lower employee headcount.


41



Year-Over-Year Change in Research and Development Expenses for the Years Ended December 31, 2014 and 2013
(dollars in thousands)
 
2014 (Decrease)/Increase
From 2013
 
2013 (Decrease)/Increase
From 2012
 
$
 
%
 
$
 
%
Personnel-related
$
(5,150
)
 
(8.9)%
 
$
(1,279
)
 
(2.2)%
Facilities and information technology infrastructure
(1,943
)
 
(11.1)%
 
(943
)
 
(5.1)%
Computer hardware and supplies
1,467

 
43.8%
 
371

 
12.5%
Consulting and outside services
1,049

 
7.6%
 
(879
)
 
(6.0)%
Other expenses
(282
)
 
(9.3)%
 
(900
)
 
(22.8)%
Total research and development expenses decrease
$
(4,859
)
 
(5.1)%
 
$
(3,630
)
 
(3.7)%

2014 Compared to 2013

The decreases in personnel-related expenses and facilities and information technology infrastructure costs for 2014, compared to 2013, reflect lower employee headcount which resulted in lower usage of facilities and information technology overhead. The increases in computer hardware and supplies expenses and consulting and outside services expenses were primarily the result of the timing of certain development projects in 2014, compared to 2013, as we develop new products and solutions consistent with our Avid Everywhere strategic vision.

2013 Compared to 2012

The decrease in personnel-related expenses was primarily due to decreased salary expenses on lower employee headcount largely resulting from our 2012 restructuring actions, partially offset by higher accruals for incentive-based compensation. The decrease in facilities and information technology infrastructure costs for 2013, compared to 2012, was primarily due to employee headcount reductions and facilities closures resulting from our 2012 restructuring actions. The decrease in consulting and outside services expenses for 2013, compared to 2012, was primarily the result of a reduction in the use of contract employees and services.

Marketing and Selling Expenses

Marketing and selling expenses consist primarily of employee salaries and benefits for selling, marketing and pre-sales customer support personnel; commissions; travel expenses; advertising and promotional expenses; web design costs and facilities costs. Marketing and selling expenses decreased $0.8 million, or 0.6%, during the year ended December 31, 2014, compared to 2013, primarily due to lower product introduction expenses.

Year-Over-Year Change in Marketing and Selling Expenses for Years Ended December 31, 2014 and 2013
(dollars in thousands)
 
2014 (Decrease)/Increase
From 2013
 
2013 (Decrease)/Increase
From 2012
 
$
 
%
 
$
 
%
Product introduction
$
(3,666
)
 
(100.2)%
 
$
181

 
5.2%
Consulting and outside services
1,213

 
8.8%
 
(4,113
)
 
(22.9)%
Foreign exchange losses (gains)
721

 
385.4%
 
(509
)
 
(73.1)%
Personnel-related
621

 
0.5%
 
(9,996
)
 
(6.9)%
Facilities and information technology infrastructure
(271
)
 
(1.0)%
 
(3,484
)
 
(10.9)%
Tradeshow and other promotional
27

 
0.3%
 
(2,213
)
 
(20.6)%
Other expenses
514

 
0.9%
 
543

 
1.0%
Total marketing and selling expenses decrease
$
(841
)
 
(0.6)%
 
$
(19,591
)
 
(12.8)%


42



2014 Compared to 2013

The decrease in product introduction expenses in 2014 was the result of significant new product introductions during 2013, which was not present at the same level in 2014. The increase in consulting and outside services expenses for 2014, compared to 2013, was primarily the result of costs related to our Avid Customer Association, or ACA, which was launched in September 2013, and the inaugural ACA events, Avid Connect and Avid Connect Europe, which took place in April 2014 and September 2014, respectively. The net foreign exchange losses (specifically, foreign exchange transaction losses on net monetary assets denominated in foreign currencies) were $0.9 million for 2014, compared to losses of $0.2 million in the 2013 period. The increased losses were primarily the result of the depreciation of foreign currencies during 2014. We classify these gains and losses within marketing and selling expenses because the gains and losses generally arise from revenue arrangements that are denominated in foreign currencies to facilitate sales in certain foreign jurisdictions.

2013 Compared to 2012

The decrease in personnel-related expenses for 2013, compared to 2012, was primarily due to decreased salary, commissions and benefit expenses on lower employee headcount, resulting from our 2012 restructuring actions, which also resulted in lower usage of facilities and information technology overhead. The decrease in consulting and outside services costs for 2013, compared to 2012, was the result of lower costs related to long-term sales and marketing strategy planning. The decrease in tradeshow and other promotional expenses was the result of our cost reduction initiatives started in 2013.

General and Administrative Expenses

General and administrative expenses consist primarily of employee salaries and benefits for administrative, executive, finance and legal personnel; audit, legal and strategic consulting fees; and insurance, information systems and facilities costs. Information systems and facilities costs reported within general and administrative expenses are net of allocations to other expenses categories. General and administrative expenses increased $3.6 million, or 4.6%, during the year ended December 31, 2014, compared to 2013, primarily as a result of increased incentive-based compensation and stock based compensation expenses in 2014.
Year-Over-Year Change in General and Administrative Expenses for the Years Ended December 31, 2014 and 2013
(dollars in thousands)
 
2014 (Decrease)/Increase
From 2013
 
2013 (Decrease)/Increase
From 2012
 
$
 
%
 
$
 
%
Personnel-related
$
2,291

 
8.0%
 
$
1,479

 
5.4%
Facilities and information technology infrastructure
1,291

 
13.4%
 
(1,284
)
 
(11.8)%
Consulting and outside services
260

 
0.7%
 
26,247

 
261.6%
Other expenses
(239
)
 
(8.3)%
 
(930
)
 
(24.5)%
Total general and administrative expenses increase
$
3,603

 
4.6%
 
$
25,512

 
49.0%

2014 Compared to 2013

The increase in personnel-related expenses in 2014, compared to 2013, was primarily due to an increase in incentive-based compensation and stock based compensation expenses, partially offset by a decrease in salaries expenses and management transition related costs. The increase in facilities and information technology infrastructure costs was primarily the result of increased usage of facilities costs by the general and administrative function. The costs related to the restatement of our September 30, 2012 and prior financial statements and related activities continued through 2014 at levels similar to 2013.

2013 Compared to 2012

The increase in consulting and outside services costs in 2013, compared to 2012, was primarily due to $20.6 million in audit, legal and other professional fees for outside services incurred during 2013, but not present in 2012, resulting from the restatement of

43



our September 30, 2012 and prior financial statements related activities. The increase in personnel-related expenses was primarily the result of higher accruals for incentive-based compensation, as well as costs related to our management transition, partially offset by lower stock-based compensation expense. The decrease in facilities and information technology infrastructure costs was primarily due to employee headcount reductions and facilities closures resulting from our 2012 restructuring actions.

Amortization of Intangible Assets

Intangible assets result from acquisitions and include developed technology, customer-related intangibles, trade names and other identifiable intangible assets with finite lives. These intangible assets are amortized using the straight-line method over the estimated useful lives of such assets, which are generally two years to twelve years. Amortization of developed technology is recorded within cost of revenues. Amortization of customer-related intangibles, trade names and other identifiable intangible assets is recorded within operating expenses.

Year-Over-Year Change in Amortization of Intangible Assets for the Years Ended December 31, 2014 and 2013
(dollars in thousands)
 
2014 Decrease
From 2013
 
2013 Decrease
From 2012
 
$
 
%
 
$
 
%
Amortization of intangible assets recorded in cost of revenues
$
(1,418
)
 
(96.6)%
 
$
(1,106
)
 
(43.0)%
Amortization of intangible assets recorded in operating expenses
(1,022
)
 
(38.6)%
 
(1,606
)
 
(37.8)%
Total amortization of intangible assets
$
(2,440
)
 
(59.3)%
 
$
(2,712
)
 
(39.7)%

2014 Compared to 2013

The decrease in amortization of intangible assets recorded in cost of revenues and operating expenses during 2014, compared to 2013, was primarily the result of certain acquired intangible assets becoming fully amortized. The unamortized balance of our identifiable intangible assets related to all acquisitions was $2.4 million at December 31, 2014. We expect amortization of these intangible assets to be approximately $1.5 million in 2015 and $0.9 million in 2016. See Note I, Intangible Assets, to our Consolidated Financial Statements in Item 8 for further information regarding our identifiable intangible assets.

2013 Compared to 2012

The decrease in amortization of intangible assets recorded in cost of revenues during 2013, compared to 2012, was primarily the result of certain acquired technology-related intangible assets becoming fully amortized. The decrease in amortization recorded in operating expenses for the same period was primarily the result of certain acquired intangible assets becoming fully amortized.

Restructuring Costs, Net

2013 Restructuring Actions

In June 2013, our leadership evaluated the marketing and selling teams and, in an effort to better align sales resources with our strategic goals and enhance its global account team approach, eliminated 31 positions. As a result, we recognized related restructuring costs of $1.7 million in 2013.

During November and December 2013, our executive management team identified opportunities to lower costs in the supply and hardware technology group by eliminating 29 positions in hardware shared services and 15 positions in the supply and technology group. Additionally, an engineering reorganization at the same time resulted in the elimination of four engineering positions. As a result, we recognized $1.7 million of related restructuring costs in 2013.

2012 Restructuring Plan

In June 2012, we committed to a series of strategic actions (the “2012 Plan”) to focus on our Broadcast and Media market and Video and Audio Post and Professional market and to drive improved operating performance. These actions included the

44



divestiture of certain of our consumer-focused product lines, a rationalization of the business operations and a reduction in force. Actions under the plan included the elimination of approximately 280 positions in June 2012, the abandonment of one of the Company’s facilities in Burlington, Massachusetts and the partial abandonment of facilities in Mountain View and Daly City, California, in September 2012, and the partial abandonment of the facility in Pinewood, UK, in December 2012. During 2012, we recorded restructuring charges of $13.9 million related to severance costs and $8.6 million for the closure or partial closure of facilities, which included non-cash amounts of $1.4 million for fixed asset write-offs and $1.0 million for deferred rent liability write-offs during 2012.

During 2013, we recorded $0.1 million in additional severance costs and revisions totaling $1.8 million resulting from sublease assumption changes and other costs related to the abandoned facilities under the 2012 Plan. We substantially completed all actions under the 2012 Plan prior to December 31, 2012.

In June 2014, we signed an agreement for surrender of the partially abandoned property at Pinewood, UK. As a result, we recorded a recovery of $0.2 million, as we were released from all obligations related to the surrendered property.

Prior Years’ Restructuring Plans

During 2012, the Company recorded restructuring recoveries of $0.3 million as a result of revised severance estimates under the 2011 Plan, revisions totaling $0.7 million as a result of sublease assumption changes for the partial abandonment of a facility in Daly City, California, under the 2010 Plan, and revisions totaling $1.8 million as a result of sublease assumption changes for the partial abandonment of a facility in Daly City, California, under the 2008 Plan.

The remaining accrual balance of $0.6 million at December 31, 2014 was related to the closure of part of our Dublin, Ireland facility under the 2008 Plan. No further actions are anticipated under the prior years’ restructuring plans.

Interest and Other Income (Expense), Net

Interest and other income (expense), net, generally consists of interest income and interest expense.

Interest and Other Income (Expense) for the Years Ended December 31, 2014 and 2013
(dollars in thousands)
 
2014
 
Change
 
2013
 
Income
(Expense)
 
$
 
%
 
Income
(Expense)
Interest income
$
126

 
$
(429
)
 
(77.3)%
 
$
555

Interest expense
(1,771
)
 
(197
)
 
12.5%
 
(1,574
)
Other income (expense), net
(1,138
)
 
(1,481
)
 
(431.8)%
 
343

Total interest and other income (expense), net
$
(2,783
)
 
$
(2,107
)
 
311.7%
 
$
(676
)

Interest and Other Income (Expense) for the Years Ended December 31, 2013 and 2012
(dollars in thousands)
 
2013
 
Change
 
2012
 
Income
(Expense)
 
$
 
%
 
Income
(Expense)
Interest income
$
555

 
$
345

 
164.3%
 
$
210

Interest expense
(1,574
)
 
(26
)
 
1.7%
 
(1,548
)
Other income (expense), net
343

 
1,046

 
(148.8)%
 
(703
)
Total interest and other income (expense), net
$
(676
)
 
$
1,365

 
(66.9)%
 
$
(2,041
)


45



2014 Compared to 2013

The change in interest and other income (expense), net for 2014, compared to 2013, was primarily the result of changes in the valuation of a deferred compensation plan. During 2014, there was an increase in the valuation of the plan obligations resulting in net expense recorded in other income (expense), compared to a decrease in the valuation in 2013 that resulted in net income recorded as other income (expense).

2013 Compared to 2012

The change in interest and other income (expense), net for 2013, compared to 2012, was primarily the result of changes in the valuation of a deferred compensation plan. During 2013, there was a decrease in the valuation of the plan resulting in net income recorded in other income (expense), compared to an increase in the valuation in 2012 that resulted in net expense recorded as other income (expense).

Provision for Income Taxes

Provision for Income Taxes for the Years Ended December 31, 2014 and 2013
(dollars in thousands)
 
2014
 
Change
 
2013
 
Provision
 
$
 
%
 
Provision
Provision for income taxes
$
2,188

 
$
(751
)
 
(25.6)%
 
$
2,939


Provision for Income Taxes for the Years Ended December 31, 2013 and 2012
(dollars in thousands)
 
2013
 
Change
 
2012
 
Provision
 
$
 
%
 
Provision
Provision for income taxes
$
2,939

 
$
(1,110
)
 
(27.4)%
 
$
4,049


Our effective tax rate, which represents our tax provision as a percentage of income before tax, was 12.9%, 12.2% and 7.9%, respectively, for 2014, 2013 and 2012. Our 2014 provision for income taxes decreased by $0.8 million from 2013, primarily as a result of a $0.3 million benefit for the reversal of a previously accrued Canada withholding tax penalty and a $0.5 million benefit associated with a change in the Company’s indefinite reinvestment assertion with respect to its Canadian subsidiary. During 2013, there were no significant discrete tax items that impacted the tax provision. The tax provision of $4.0 million for 2012 included the following discrete items: a $2.3 million withholding tax liability, including interest and penalties, on a Canadian dividend; a $1.4 million tax provision associated with an Irish income tax audit; a $0.5 million tax provision associated with a change in the Company’s indefinite reinvestment assertion with respect to its Canadian subsidiary; and the adjustment of a valuation allowance against certain foreign deferred tax assets of $0.7 million; largely offset by a $3.8 million benefit for a refund claim related to a previously accrued Canadian withholding tax liability and a $0.7 million benefit for the release of a tax reserve.

We have significant net deferred tax assets that are primarily a result of tax credits and operating loss carryforwards. The realization of the net deferred tax assets is dependent upon the generation of sufficient future taxable income in the applicable tax jurisdictions. We regularly review our deferred tax assets for recoverability with consideration for such factors as historical losses, projected future taxable income, the expected timing of the reversals of existing temporary differences, and tax planning strategies. ASC Topic 740, Income Taxes, requires us to record a valuation allowance when it is more likely than not that some portion or all of the deferred tax assets will not be realized. Based on the magnitude of our deferred tax assets at December 31, 2014 and our level of historical U.S. losses, we have determined that the uncertainty regarding the realization of these assets is sufficient to warrant the need for a full valuation allowance against our U.S. deferred tax assets. We have also determined that a valuation allowance is warranted on a portion of our foreign deferred tax assets.

LIQUIDITY AND CAPITAL RESOURCES

Liquidity and Sources of Cash


46



We have generally funded our operations in recent years through the use of existing cash balances, which we have supplemented from time to time since the fourth quarter of 2010 with borrowings under our credit facilities. At December 31, 2014, our principal sources of liquidity included cash and cash equivalents totaling $25.1 million and available borrowings under our credit facilities of $29.3 million, with total liquidity aggregating approximately $54.4 million.

At December 31, 2014, our working capital was $(157.2) million, compared to $(133.0) million at December 31, 2013. Our working capital deficit at both dates was largely due to the significant level of deferred revenues recorded, which consist of service obligations that do not represent meaningful cash requirements. We have deferred a significant portion of revenues from sales transactions and recorded them as deferred revenues. We experienced a decrease in cash during 2014 due to significantly higher outside professional fees and consultant costs resulting from the restatement-related activities. The majority of the restatement-related outside professional fees and consultant costs were paid during 2014.

Our cash requirements vary depending on factors such as the growth of our business, changes in working capital, capital expenditures, our acquisition of businesses or technologies and obligations under restructuring programs. We are continuing to focus on further reducing costs, improving our operational efficiency and maintaining adequate liquidity. Actions to reduce costs and improve efficiencies could require us to record additional restructuring charges. We believe that we have sufficient cash, cash equivalents, funds generated from operations and funds available under our credit facilities (through their expiration) to meet our operational objectives for at least the next twelve months, as well as for the foreseeable future.

On October 1, 2010, we entered into a Credit Agreement with Wells Fargo Capital Finance LLC, or Wells Fargo, that established two revolving credit facilities with combined maximum availability of up to $60 million for borrowings or letter of credit guarantees. The actual amount of credit available to us will vary depending upon changes in the level of the respective accounts receivable and inventory, and is subject to other terms and conditions. On August 29, 2014, we entered into an amendment to our Credit Agreement that extended the maturity date from October 1, 2014 to October 1, 2015.

The Credit Agreement contains customary representations and warranties, covenants, mandatory prepayments, and events of default under which our payment obligations may be accelerated, including guarantees and liens on substantially all of our assets to secure their obligations under the Credit Agreement. The Credit Agreement requires that Avid Technology, Inc., our parent company, maintain liquidity (comprised of unused availability under its portion of the credit facilities plus certain unrestricted cash and cash equivalents) of $10.0 million, at least $5.0 million of which must be from unused availability under its portion of the credit facilities, and our subsidiary, Avid Technology International B.V., or Avid Europe, is required to maintain liquidity (comprised of unused availability under the Avid Europe portion of the credit facilities plus certain unrestricted cash and cash equivalents) of $5.0 million, at least $2.5 million of which must be from unused availability under the Avid Europe portion of the credit facilities. Interest accrues on outstanding borrowings under the credit facilities at a rate of either LIBOR plus 2.75% or a base rate (as defined in the Credit Agreement) plus 1.75%, at the option of Avid Technology, Inc. or Avid Europe, as applicable. We must also pay Wells Fargo a monthly unused line fee at a rate of 0.625% per annum. Any borrowings under the credit facilities are secured by a lien on substantially all the assets of Avid Technology and Avid Europe. See Note Q to our Consolidated Financial Statements for further detail on the amendment to our Credit Agreement.

At December 31, 2014, we had no outstanding borrowings under the Credit Agreement and had certain reserves and letters of credit guaranteed under the credit facilities of $3.0 million and $0.8 million, respectively. At December 31, 2014, we had available borrowings under the credit facilities of $29.3 million, after taking into consideration the outstanding letters of credit and related liquidity covenant.

We believe that our existing sources of liquidity and access to additional capital is a significant factor for our future development and the implementation of our growth strategy, and accordingly we may choose at any time to raise capital through debt or equity financing to strengthen our financial position, facilitate growth and provide us with additional flexibility to take advantage of business opportunities. This may result in further dilution to our stockholders. There can be no assurance that additional financing will be available to us when needed or, if available, that such financing can be obtained on commercially reasonable terms. If we are not able to obtain the additional financing on a timely basis should it be required, or generate significant material revenues from operations, we may not be able to execute our business strategy.


47



Cash Flows

The following table summarizes our cash flows for the years ended December 31, 2014, 2013 and 2012 (in thousands):
 
Year Ended December 31,
 
2014
 
2013
 
2012
Net cash (used in) provided by operating activities
$
(9,897
)
 
$
(9,145
)
 
$
34,709

Net cash (used in) provided by investing activities
(11,800
)
 
(11,536
)
 
1,697

Net cash (used in) provided by financing activities
(436
)
 
(96
)
 
354

Effect of foreign currency exchange rates on cash and cash equivalents
(1,014
)
 
(1,410
)
 
775

Net (decrease) increase in cash and cash equivalents
$
(23,147
)
 
$
(22,187
)
 
$
37,535


Cash Flows from Operating Activities

Cash used in operating activities aggregated $9.9 million for the year ended December 31, 2014. The cash usage during 2014 was attributable to costs associated with restatement-related activities, and to a lesser extent, restructuring activities. The use of cash associated with the restatement and restructuring activities was materially abated at the end of 2014, however, we do expect residual payments into 2015.

Working capital items, excluding cash, decreased by $47.5 million in the aggregate for the year ended December 31, 2014, reflecting primarily the non-cash amortization of pre-2011 deferred revenues, partially offset by improvements in cash collections of accounts receivable and lower cash investments in inventory.

Accounts receivable decreased $2.1 million for the year ended December 31, 2014, largely reflecting improved cash collections. Accounts receivable balances are net of allowances for sales returns, bad debts and customer rebates, all of which we estimate and record based primarily on historical experience.

Inventory decreased $12.1 million for the year ended December 31, 2014, reflecting our efforts to further optimize working capital investments through improved supply chain discipline. Inventory includes component parts, finished goods as well as inventory at customer sites related to shipments for which we have not yet recognized revenue. Inventory is sourced from third party suppliers, located primarily in Asia.

Cash Flows from Investing Activities

For the year ended December 31, 2014, net cash used in investing activities primarily reflected $13.3 million used for the purchase of property and equipment. Our purchases of property and equipment typically consist of computer hardware and software to support our R&D activities and information systems. We expect our 2015 capital expenditures to be materially consistent with those for 2014.

Cash Flows from Financing Activities

For the year ended December 31, 2014, net cash used in financing activities primarily reflected costs associated with tax withholding obligations related to the issuance of common stock upon vesting of restricted stock awards. At December 31, 2014, we had no outstanding borrowings under the credit facilities.



48



CONTRACTUAL AND COMMERCIAL OBLIGATIONS

The following table sets forth future payments that we were obligated to make at December 31, 2014 under existing lease agreements and commitments to purchase inventory and other goods and services (in thousands):
 
 
Total
 
Less than
1 Year
 
 
1 – 3 Years
 
 
3 – 5 Years
 
After
5 Years
Operating leases
$
69,666

 
$
14,964

 
$
25,149

 
$
19,425

 
$
10,128

Unconditional purchase obligations (a)
22,538

 
22,538

 

 

 

 
$
92,204

 
$
37,502

 
$
25,149

 
$
19,425

 
$
10,128

    
(a)
At December 31, 2014, we had entered into purchase commitments for certain inventory and other goods and services used in our normal operations. The purchase commitments covered by these agreements are generally for a period of less than one year.

Other contractual arrangements or unrecognized tax positions that may result in cash payments consisted of the following at December 31, 2014 (in thousands):
 
 
Total
 
Less than
1 Year
 
 
1 – 3 Years
 
 
3 – 5 Years
 
After
5 Years
Unrecognized tax positions and related interest
$
812

 
$

 
$
812

 
$

 
$

Stand-by letters of credit
3,888

 
1,322

 

 
2,566

 

 
$
4,700

 
$
1,322

 
$
812

 
$
2,566

 
$

   
We have three letters of credit at a bank that are used as security deposits in connection with our leased Burlington, Massachusetts headquarters office space. In the event of default on the underlying leases, the landlords would, at December 31, 2014, be eligible to draw against the letters of credit to a maximum of $2.6 million in the aggregate. The letters of credit are subject to aggregate reductions provided that we are not in default of the underlying leases and meet certain financial performance conditions. In no case will the letters of credit amounts be reduced to below $1.2 million in the aggregate throughout the lease periods, all of which extend to May 2020.

In addition, we have letters of credit totaling $1.3 million that support our ongoing operations. These letters of credit have various terms and expire during 2015 and beyond, while some of the letters of credit may automatically renew based on the terms of the underlying agreements.

We operate our business globally and, consequently, our results from operations are exposed to movements in foreign currency exchange rates. We enter into foreign currency contracts, which generally have one-month maturities, to reduce exposures associated with the foreign exchange risks of certain forecasted third-party and intercompany receivables, payables and cash balances. At December 31, 2014, we had foreign currency contracts outstanding with an aggregate notional value of $25.4 million, denominated in the euro, British pound, Japanese yen, Danish krone, Canadian dollar and Singapore dollar, as a hedge against forecasted foreign currency denominated receivables, payables and cash balances.


OFF-BALANCE SHEET ARRANGEMENTS

Other than operating leases, we do not engage in off-balance sheet financing arrangements or have any variable-interest entities. At December 31, 2014, we did not have any off-balance sheet arrangements as defined in Item 303(a)(4)(ii) of Regulation S-K.


RECENT ACCOUNTING PRONOUNCEMENTS

Recent Accounting Pronouncements To Be Adopted

On May 28, 2014, the Financial Accounting Standards Board, or the FASB, and the International Accounting Standards Board, or the IASB, issued substantially converged final standards on revenue recognition. FASB Accounting Standards Update, or ASU, No. 2014-09, Revenue from Contracts with Customers (Topic 606), was issued in three parts: (a) Section A, “Summary and

49



Amendments That Create Revenue from Contracts with Customers (Topic 606) and Other Assets and Deferred Costs-Contracts with Customers (Subtopic 340-40),” (b) Section B, “Conforming Amendments to Other Topics and Subtopics in the Codification and Status Tables” and (c) Section C, “Background Information and Basis for Conclusions.” The standard outlines a single comprehensive model for entities to use in accounting for revenue arising from contracts with customers and supersedes most current revenue recognition guidance, including industry-specific guidance.

The new revenue recognition guidance becomes effective for us on January 1, 2017, and early adoption is not permitted. Entities have the option of using either a full retrospective or a modified approach to adopt the guidance in the ASU.  We have not yet selected a transition method and are currently evaluating the effect that the updated standard will have on our consolidated financial statements and related disclosures.

50



ITEM 7A.
QUANTITATIVE AND QUALITATIVE DISCLOSURE ABOUT MARKET RISK

Foreign Currency Exchange Risk

We have significant international operations and, therefore, our revenues, earnings, cash flows and financial position are exposed to foreign currency risk from foreign-currency-denominated receivables, payables, sales transactions and net investments in foreign operations. We derive more than half of our revenues from customers outside the United States. This business is, for the most part, transacted through international subsidiaries and generally in the currency of the end-user customers. Therefore, we are exposed to the risks that changes in foreign currency could adversely affect our revenues, net income and cash flow.

We may use derivatives in the form of foreign currency contracts to manage certain short-term exposures to fluctuations in the foreign currency exchange rates that exist as part of our ongoing international business operations. We do not enter into any derivative instruments for trading or speculative purposes. The success of our hedging programs depends on forecasts of transaction activity in the various currencies and contract rates versus financial statement rates. To the extent these forecasts are overstated or understated during periods of currency volatility, we could experience unanticipated currency gains or losses.

We record all derivatives on the balance sheet at fair value. The accounting for changes in the fair value of derivatives depends on the intended use of the derivative, whether we have elected to designate a derivative in a hedging relationship and apply hedge accounting, and whether the hedging relationship has satisfied the criteria necessary to apply hedge accounting. Derivatives designated and qualifying as hedges of the exposure to changes in the fair value of an asset, liability or firm commitment attributable to a particular risk are considered fair value hedges. Derivatives designated and qualifying as hedges of the exposure to variability in expected future cash flows, or other types of forecasted transactions, are considered cash flow hedges. Derivatives may also be designated as hedges of the foreign currency exposure of a net investment in a foreign operation. Hedge accounting generally provides for the matching of the timing of gain or loss recognition on the hedging instrument with the recognition of the changes in the fair value of the hedged asset or liability that are attributable to the hedged risk in a fair value hedge or the earnings effect of the hedged forecasted transactions in a cash flow hedge. We may enter into derivative contracts that are intended to economically hedge certain of our risks, even though we elect not to apply hedge accounting.

In an effort to hedge against the foreign exchange exposure of certain forecasted receivables, payables and cash balances, we enter into short-term foreign currency forward contracts. There are two objectives of this foreign currency forward-contract program: (1) to offset any foreign exchange currency risk associated with cash receipts expected to be received from our customers and cash payments expected to be made to our vendors over the following 30 days and (2) to offset the impact of foreign currency exchange on our net monetary assets denominated in currencies other than the functional currency of the legal entity. These forward contracts typically mature within 30 days of execution. We record gains and losses associated with currency rate changes on these contracts in results of operations, offsetting gains and losses on the related assets and liabilities. At December 31, 2014, we had such foreign currency forward contracts outstanding with an aggregate notional value of $25.4 million, denominated in the euro, British pound, Japanese yen, Danish krone, Canadian dollar and Singapore dollar, as a hedge against actual and forecasted foreign-currency-denominated receivables, payables and cash balances. At December 31, 2014, we also had short-term foreign currency spot and forward contracts with an aggregate notional value of $2.8 million, denominated in the euro, Canadian dollar and Japanese yen, as a hedge against the foreign currency exchange risk associated with certain of our net monetary assets denominated in foreign currencies.

We have not designated these forward contracts as hedging instruments and, accordingly, we recorded the fair value of these contracts at the end of each reporting period in our consolidated balance sheet, with changes in the fair value recorded in our marketing and selling expenses. At December 31, 2014, the aggregate fair value of the outstanding derivatives was $(0.5) million. During the years ended December 31, 2014, 2013 and 2012, we recorded net losses of $(0.9) million, $(0.2) million and $(0.7) million, respectively, that resulted from the gains and losses on our foreign currency contracts and the revaluation of the related hedged items.

A hypothetical change of 10% in appreciation or depreciation of foreign currency exchange rates from the quoted foreign currency exchange rates at December 31, 2014, would not have a significant impact on our financial position, results of operations or cash flows, assuming the above-mentioned forecas