UNITED STATES
SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

__________________



FORM 10‑Q



☒    QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the quarterly period ended June 30, 2017

OR

☐    TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from ____________to____________



Commission File No. 001-34220

__________________________









3D SYSTEMS CORPORATION

(Exact name of Registrant as specified in its Charter)

_______________  _____________________________



(Registrant’s Telephone Number, Including Area Code): (803) 326‑3900

__________________________



Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐



Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).  Yes ☒ No ☐



Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer”, “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.  (Check one):



If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 7(a)(2)(B) of the Securities Act.     ☐



Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b‑2 of the Exchange Act.) Yes ☐ No ☒



APPLICABLE ONLY TO CORPORATE ISSUERS:



Indicate the number of shares outstanding of each of the issuer’s classes of common stock, as of the latest practicable date.

Shares of Common Stock, par value $0.001, outstanding as of July 26, 2017:  113,800,249



---

 



3D SYSTEMS CORPORATION

Quarterly Report on Form 10-Q for the

Quarter and Six Months Ended June 30, 2017



TABLE OF CONTENTS





 

---

 



PART I — FINANCIAL INFORMATION



Item 1.  Financial Statements.



3D SYSTEMS CORPORATION

CONDENSED CONSOLIDATED BALANCE SHEETS





See accompanying notes to condensed consolidated financial statements.

---

 





3D SYSTEMS CORPORATION

CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS AND COMPREHENSIVE INCOME (LOSS)

(Unaudited)











See accompanying notes to condensed consolidated financial statements.



---

 



3D SYSTEMS CORPORATION

CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS

(Unaudited)











See accompanying notes to condensed consolidated financial statements.

 

---

 





3D SYSTEMS CORPORATION

CONDENSED CONSOLIDATED STATEMENT OF EQUITY

(Unaudited)



















See accompanying notes to condensed consolidated financial statements.



 

---

 



3D SYSTEMS CORPORATION

NOTES TO THE CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

 (Unaudited)



(1)  Basis of Presentation



The accompanying unaudited condensed consolidated financial statements include the accounts of 3D Systems Corporation and its subsidiaries (collectively, the “Company”). All significant intercompany transactions and balances have been eliminated in consolidation. The unaudited condensed consolidated financial statements have been prepared in accordance with generally accepted accounting principles in the United States of America (“GAAP”) and the rules and regulations of the Securities and Exchange Commission (“SEC”) applicable to interim reports. Accordingly, they do not include all the information and notes required by GAAP for complete financial statements and should be read in conjunction with the audited financial statements included in the Company’s Annual Report on Form 10-K for the year ended December 31, 2016 (“Form 10-K”).



In the opinion of management, the unaudited condensed consolidated financial statements contain all adjustments, consisting of adjustments of a normal recurring nature, necessary to present fairly the financial position, results of operations and cash flows for the periods presented. The results of operations for the quarter and six months ended June 30, 2017 are not necessarily indicative of the results to be expected for the full year. The preparation of financial statements in accordance with GAAP requires management to make estimates and assumptions that affect the amounts reported in the financial statements. Actual results may differ from those estimates and assumptions. Certain prior period amounts presented in the condensed consolidated financial statements and accompanying footnotes have been reclassified to conform to current year presentation. All amounts presented in the accompanying footnotes are presented in thousands, except for per share information.



Recently Adopted Accounting Pronouncements



In the first quarter of 2017, the Company adopted Financial Accounting Standards Board (“FASB”) Accounting Standards Update (“ASU”) No. 2016-09, “Compensation – Stock Compensation (Topic 718), Improvements to Employee Share-Based Payment Accounting”. The following summarizes the effects of the adoption on the Company’s unaudited condensed consolidated financial statements:



Forfeitures - Prior to adoption, share-based compensation expense was recognized on a straight-line basis, net of estimated forfeitures, such that expense was recognized only for share-based awards that were expected to vest. A forfeiture rate was estimated annually and revised, if necessary, in subsequent periods if actual forfeitures differed from initial estimates. Upon adoption, the Company no longer applies a forfeiture rate and instead accounts for forfeitures as they occur. The change was applied on a modified retrospective basis resulting in a cumulative effect adjustment to retained earnings of $10,206 as of January 1, 2017. Prior periods were not adjusted.



Statement of Cash Flows - The Company historically accounted for excess tax benefits related to share-based compensation on the Statement of Cash Flows as a financing activity. Upon adoption of this standard, excess tax benefits are classified along with other income tax cash flows as an operating activity. The Company has elected to adopt this portion of the standard on a prospective basis beginning in 2017. Prior periods were not adjusted.



Income taxes - Upon adoption of this standard, all excess tax benefits and tax deficiencies related to share-based compensation are recognized as income tax expense or benefit in the income statement. The tax effects of exercised or vested awards are treated as discrete items in the reporting period in which they occur. Prior periods were not adjusted. 



Recently Issued Accounting Pronouncements



In May 2017, the FASB issued ASU No. 2017-09, “Compensation – Stock Compensation (Topic 718): Scope of Modification Accounting” (“ASU 2017-09”), in an effort to reduce diversity and clarify what constitutes a modification, as it relates to the change in terms or conditions of a share-based payment award. According 2017-09, the Company should account for the effects of a modification unless all of the following are met: (1) the fair value of the modified award is the same as the fair value the original award immediately before the original award is modified, (2) the vesting conditions of the modified award are the same as the vesting conditions of the original award immediately before the original award is modified, and (3) the classification of the modified award as an equity instrument or a liability instrument is the same as the classification of the original award immediately before the original award is modified. The amendments in 2017-09 are effective for annual periods, and interim periods within those annual periods, beginning after December 15, 2017, with early adoption permitted. The Company will adopt ASU 2017-09 beginning January 1, 2018.



---

 

In March 2017, the FASB issued ASU No. 2017-07, “Compensation – Retirement Benefits (Topic 715): Improving the Presentation of Net Periodic Pension Cost and Net Periodic Postretirement Benefit Cost” (“ASU 2017-07”), which standardizes the presentation of net benefit cost in the income statement and on the components eligible for capitalization in assets. ASU 2017-07 is effective for fiscal years beginning after December 15, 2017, including interim periods within those annual periods. The amendments in ASU 2017-07 should be applied retrospectively for the presentation of the service cost component and the other components of net periodic pension cost and net periodic postretirement benefit cost in the income statement and prospectively, on and after the effective date, for the capitalization of the service cost component of net periodic pension cost and net periodic postretirement benefit in assets. The Company will adopt ASU 2017-07 in the first quarter of 2018 and does not expect the implementation of this guidance to have a material effect on its consolidated financial statements.



In January 2017, the FASB issued ASU No. 2017-04, “Intangibles - Goodwill and Other (Topic 350): Simplifying the Test for Goodwill Impairment” (“ASU 2017-04”), which eliminates the performance of Step 2 from the goodwill impairment test. In performing its annual or interim impairment testing, an entity will instead compare the fair value of the reporting unit with its carrying amount and recognize any impairment charge for the amount by which the carrying amount exceeds the reporting unit’s fair value. Additionally, an entity should consider income tax effects from any tax deductible goodwill on the carrying amount of the reporting unit when measuring the goodwill impairment loss. The standard is effective for fiscal years beginning after December 15, 2019.  Early adoption is permitted for interim or annual impairment tests performed on testing dates after January 1, 2017. The Company is currently in the process of evaluating when it will adopt ASU 2017-04 and its impact on its consolidated financial statements.



In October 2016, the FASB issued ASU No. 2016-16, “Income Taxes (Topic 740): Intra-Entity Transfers of Assets Other Than Inventory” (“ASU 2016-16”). ASU 2016-16 permits the recognition of income tax consequences related to an intra-entity transfer of an asset other than inventory when the transfer occurs. It is effective for annual reporting periods beginning after December 15, 2017 and interim periods within those annual periods.  Early adoption is permitted for any interim or annual period. The Company is currently in the process of evaluating the impact of adoption of ASU 2016-16 on its consolidated financial statements.



In August 2016, the FASB issued ASU No. 2016-15, “Statement of Cash Flows (Topic 230) – Classification of Certain Cash Receipts and Cash Payments” (“ASU 2016-15”). With the objective of reducing the existing diversity in practice, ASU 2016-15 addresses the manner in which certain cash receipts and cash payments are presented and classified in the statement of cash flows. ASU 2016-15 is effective for annual reporting periods beginning after December 15, 2017. The amendments should be applied retrospectively with earlier application permitted as of the beginning of an interim or annual reporting period. The Company expects that the implementation of this guidance will not have a material effect on its consolidated financial statements.



In February 2016, the FASB issued ASU No. 2016-02, “Leases (Topic 842)” (“ASU 2016-02”). ASU 2016-02 requires lessees to recognize assets and liabilities arising from operating leases on the balance sheet. It is effective for annual reporting periods beginning after December 15, 2018, including interim periods within those fiscal years. Though still evaluating the impact of ASU 2016-02, the Company expects changes to its balance sheet due to the recognition of right-of-use assets and lease liabilities related to its real estate leases, but it does not anticipate material impacts to its results of operations or liquidity.



In May 2014, the FASB issued ASU 2014-09, “Revenue from Contracts with Customers” (“ASU 2014-09”). The ASU is a comprehensive new revenue recognition model that requires a company to recognize revenue to depict the transfer of goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods or services. In August 2015, the FASB issued ASU 2015-14, which deferred the effective date of the ASU to fiscal years beginning after December 15, 2017, and interim periods within those fiscal years. Companies may use either a full retrospective or a modified retrospective approach to adopt this ASU.



The Company is in process of performing an initial assessment of the impact that the new standard will have on its financial statements. As part of the initial assessment, the Company is comparing current accounting policies to expected accounting policies under the new standard. The Company is also reviewing a sample of its contracts across various businesses and geographies to identify potential differences that could result from applying the requirements of the new standard. Further the Company is evaluating the impact of the new disclosure requirements, which are expected to be significant. In addition, the Company is in the process of evaluating potential changes to business processes, systems and controls to support recognition and disclosure under the new standard, including the possible implementation of a revenue management system.



The Company intends to use the modified retrospective method of adoption effective January 1, 2018, the cumulative effect of which would be recognized at the date of initial application with an adjustment to the opening balance of retained earnings. Under the modified retrospective approach prior year periods are not restated, however, it effectively requires a company to apply both the new revenue standard and the previous revenue guidance in the year of adoption. During the year of adoption both quantitative and qualitative disclosures are required as to the impact of the new standard compared to the previous revenue guidance.

 

---

 

Although efforts are ongoing, the Company believes certain software revenues deferred under previous guidance may be recognized earlier under the new guidance since revenue is allocated to performance obligations based on either observable inputs or estimated stand-alone selling price.  The Company is still in the process of evaluating the impact of potential differences.



No other new accounting pronouncements, issued or effective during 2017, have had or are expected to have a significant impact on the Company’s consolidated financial statements.



(2) Acquisitions



On January 31, 2017, the Company acquired 100 percent of the shares of Vertex-Global Holding B.V. (“Vertex”), a provider of dental materials worldwide under the Vertex and NextDent brands. The cash portion of the purchase price is included in cash paid for acquisitions, net of cash assumed, in the unaudited Condensed Consolidated Statement of Cash Flows. The share portion of the purchase price is included in issuance of stock for acquisitions in the unaudited Condensed Consolidated Statement of Equity. The operating results of Vertex have been included in the Company’s reported results since the closing date. The purchase price of the acquisition has been allocated to the estimated fair value of net tangible and intangible assets acquired, with any excess purchase price recorded as goodwill.



The Company had no acquisition activity in the second quarter of 2017 or in fiscal year 2016.



(3)  Inventories



Components of inventories as of June 30, 2017 and December 31, 2016 were as follows:





















(4)  Property and Equipment



Property and equipment, net, as of June 30, 2017 and December 31, 2016 were as follows:





Depreciation expense on property and equipment was $6,398 and $12,271 for the quarter and six months ended June 30, 2017, respectively, compared to $6,210 and $12,210 for the quarter and six months ended June 30, 2016, respectively.



---

 

(5)  Intangible Assets



Intangible assets, net, other than goodwill, as of June 30, 2017 and December 31, 2016 were as follows:



Amortization expense related to intangible assets was $8,984 and $17,816 for the quarter and six months ended June 30, 2017, respectively, compared to $8,860 and $17,679 for the quarter and six months ended June 30, 2016, respectively.



(6)  Accrued and Other Liabilities



Accrued liabilities as of June 30, 2017 and December 31, 2016 were as follows:



Other liabilities as of June 30, 2017 and December 31, 2016 were as follows:

















---

 

(7)  Hedging Activities and Financial Instruments



The Company conducts business in various countries using both the functional currencies of those countries and other currencies to effect cross border transactions. As a result, the Company is subject to the risk that fluctuations in foreign exchange rates between the dates that those transactions are entered into and their respective settlement dates will result in a foreign exchange gain or loss. When practicable, the Company endeavors to match assets and liabilities in the same currency on its balance sheet and those of its subsidiaries in order to reduce these risks. When appropriate, the Company enters into foreign currency contracts to hedge exposures arising from those transactions. The Company has elected not to prepare and maintain the documentation to qualify for hedge accounting treatment under Accounting Standards Codification (“ASC”) 815, “Derivatives and Hedging,” and therefore, all gains and losses (realized or unrealized) are recognized in “Interest and other income, net” in the condensed consolidated statements of operations and comprehensive income (loss). Depending on their fair value at the end of the reporting period, derivatives are recorded either in prepaid expenses and other current assets or in accrued liabilities on the condensed consolidated balance sheet.



The Company had $37,703 in notional foreign exchange contracts outstanding as of June 30, 2017, for which the fair value was not material. No foreign exchange contracts were outstanding as of December 31, 2016. 



The Company translates foreign currency balance sheets from each international businesses' functional currency (generally the respective local currency) to U.S. dollars at end-of-period exchange rates, and statements of earnings at average exchange rates for each period. The resulting foreign currency translation adjustments are a component of other comprehensive income (loss).



The Company does not hedge the fluctuation in reported revenue and earnings resulting from the translation of these international operations' results into U.S. dollars. The impact of translating the Company’s non-U.S. operations’ revenue and earnings into U.S. dollars was not material to the Company’s results of operations for the quarters and six months ended June 30, 2017 and 2016.



(8) Borrowings



Credit Facility



As of June 30, 2017, the Company had a $150,000 revolving, unsecured credit facility (the “Credit Agreement”) with a syndicate of banks, to be used for general corporate purposes and working capital needs. The Credit Agreement is scheduled to expire in October 2019. The Credit Agreement includes provisions for the issuance of letters of credit and swingline loans and contains certain restrictive covenants, which include the maintenance of a maximum consolidated total leverage ratio. The Company was in compliance with those covenants at June 30, 2017 and December 31, 2016. There were no outstanding borrowings as of June 30, 2017.



Capitalized Lease Obligations



The Company’s capitalized lease obligations primarily include a lease agreement that was entered into during 2006 with respect to the Company’s corporate headquarters located in Rock Hill, SC. The change in capitalized lease obligations, as presented in the Condensed Consolidated Balance Sheets, was due to the normal scheduled timing of payments.



(9)  Pension Benefits



The components of the Company’s pension cost recognized in the condensed consolidated statements of operations and comprehensive income (loss) for the quarters and six months ended June 30, 2017 and 2016 were as follows:

























(10)  Net Loss Per Share



The Company computes basic loss per share using net loss attributable to 3D Systems Corporation and the weighted average number of common shares outstanding during the applicable period. Diluted loss per share incorporates the additional shares issuable upon assumed exercise of stock options and the release of restricted stock and restricted stock units, except in such case when their inclusion would be anti-dilutive.  











For the quarters and six months ended June 30, 2017 and 2016, the effect of dilutive securities, including non-vested stock options and restricted stock awards/units, was excluded from the denominator for the calculation of diluted net loss per share because the Company recognized a net loss for the period and their inclusion would be anti-dilutive. The effect of dilutive securities excluded was 5,439 weighted average shares and 5,471 weighted average shares for the quarter and six months ended June 30, 2017, compared to 1,382 weighted average shares and 1,263 weighted average shares for the quarter and six months ended June 30, 2016, respectively.







(11)  Fair Value Measurements



ASC 820, “Fair Value Measurements and Disclosures,” defines fair value as the exchange price that would be received for an asset or paid to transfer a liability (an exit price) in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants on the measurement date. ASC 820 also establishes a fair value hierarchy that requires an entity to maximize the use of observable inputs that may be used to measure fair value:









For the Company, the above standard applies to cash equivalents and earnout consideration. The Company utilizes the market approach to measure fair value for its financial assets and liabilities. The market approach uses prices and other relevant information generated by market transactions involving identical or comparable assets or liabilities.

Assets and liabilities measured at fair value on a recurring basis are summarized below:





---

 





The Company did not have any transfers of assets and liabilities between Level 1, Level 2 and Level 3 of the fair value measurement hierarchy during the quarter or six months ended June 30, 2017.



In addition to the assets and liabilities included in the above table, certain of our assets and liabilities are to be initially measured at fair value on a non-recurring basis. This includes goodwill and other intangible assets measured at fair value for impairment assessment, in addition to redeemable noncontrolling interests. For additional discussion, refer to “Management’s Discussion and Analysis of Financial Condition and Results of Operations – Critical Accounting Policies and Significant Estimates” in our Form 10-K.



(12)  Income Taxes



For the quarter and six months ended June 30, 2017, the Company recorded provisions of $2,067 and $3,108, respectively, resulting in effective tax rates of 34.9% and 21.0%, respectively. For the quarter and six months ended June 30, 2016, the Company recorded provisions of $1,700 and $2,879, respectively, resulting in effective tax rates of 48.4% and 14.3%, respectively.



The Company has not provided for any taxes on the unremitted earnings of its foreign subsidiaries, as the Company intends to permanently reinvest all such earnings outside of the U.S. We believe a calculation of the deferred tax liability associated with these undistributed earnings is impracticable.



Tax years 2003 through 2015 remain subject to examination by the U.S. Internal Revenue Service, with most of the years open to examination due to the generation and utilization of net operating losses. The Company files income tax returns (which are open to examination beginning in the year shown in parentheses) in Australia (2012), Belgium (2013), Brazil (2011), China (2014), France (2014), Germany (2013), India (2013), Israel (2012), Italy (2011), Japan (2012), Korea (2012), Mexico (2011), Netherlands (2011), Switzerland (2011), the United Kingdom (2015) and Uruguay (2011).





(13)  Segment Information



The Company operates in one reportable business segment. The Company conducts its business through various offices and facilities located throughout the Asia Pacific region (Australia, China, India, Japan and Korea), EMEA (Belgium, France, Germany, Israel, Italy, the Netherlands, Switzerland and the United Kingdom), Latin America (Brazil, Mexico and Uruguay) and the United States. The Company has historically disclosed summarized financial information for the geographic areas of operations as if they were segments in accordance with ASC 280, “Segment Reporting.” Financial information concerning the Company’s geographical locations is based on the location of the selling entity. Such summarized financial information concerning the Company’s geographical operations is shown in the following tables:

















































(14)  Commitments and Contingencies



The Company leases certain of its facilities and equipment under non-cancelable operating leases. For the quarter and six months ended June 30, 2017, rent expense under operating leases was $3,698 and $7,452, respectively, compared to $2,919 and $6,175 for the quarter and six months ended June 30, 2016, respectively.



Certain of the Company’s acquisition agreements contain earnout provisions under which the sellers of the acquired businesses can earn additional amounts. The total liability recorded for these earnouts at June 30, 2017 and December 31, 2016 was $8,088 and $10,806, respectively. See Note 6.

---

 



Put Options



Owners of interests in a certain subsidiary have the right in certain circumstances to require the Company to acquire either a portion of or all of the remaining ownership interests held by them. The owners’ ability to exercise any such “put option” right is subject to the satisfaction of certain conditions, including conditions requiring notice in advance of exercise. In addition, these rights cannot be exercised prior to a specified exercise date. The exercise of these rights at their earliest contractual date would result in obligations of the Company to fund the related amounts in 2019.



Management estimates, assuming that the subsidiary owned by the Company at June 30, 2017, performs over the relevant future periods at its forecasted earnings levels, that these rights, if exercised, could require the Company, in future periods, to pay approximately $8,872 to the owners of such rights to acquire such ownership interests in the relevant subsidiary. This amount has been recorded as redeemable noncontrolling interests on the balance sheet at June 30, 2017 and December 31, 2016. The ultimate amount payable relating to this transaction will vary because it is dependent on the future results of operations of the subject business.



Litigation 



Securities and Derivative Litigation   

  

The Company and certain of its former executive officers have been named as defendants in a consolidated putative stockholder class action lawsuit pending in the United States District Court for the District of South Carolina. The consolidated action is styled KBC Asset Management NV v. 3D Systems Corporation, et al., Case No. 0:15-cv-02393-MGL. The Amended Consolidated Complaint (the “Complaint”), which was filed on December 9, 2015, alleges that defendants violated the Securities Exchange Act of 1934, as amended (the “Exchange Act”), and Rule 10b-5 promulgated thereunder by making false and misleading statements and omissions and that the former officers are control persons under Section 20(a) of the Exchange Act. The Complaint was filed on behalf of stockholders who purchased shares of the Company’s common stock between October 29, 2013, and May 5, 2015 and seeks monetary damages on behalf of the purported class. Defendants filed a motion to dismiss the Complaint in its entirety on January 14, 2016, which was denied by Memorandum Opinion and Order dated July 25, 2016 (the “Order”). Defendants filed a motion for reconsideration of the Order on August 4, 2016, which was denied by Order dated February 24, 2017.

 

Nine related derivative complaints have been filed by purported Company stockholders against certain of the Company’s former executive officers and members of its Board of Directors.  The Company is named as a nominal defendant in all nine actions. The derivatives complaints are styled as follows: (1) Steyn v. Reichental, et al., Case No. 2015-CP-46-2225, filed on July 27, 2015 in the Court of Common Pleas for the 16th Judicial Circuit, County of York, South Carolina (“Steyn”); (2) Piguing v. Reichental, et al., Case No. 2015-CP-46-2396, filed on August 7, 2015 in the Court of Common Pleas for the 16th Judicial Circuit, County of York, South Carolina (“Piguing”); (3) Booth v. Reichental, et al., Case No. 15-692-RGA, filed on August 6, 2015 in the United States District Court for the District of Delaware; (4) Nally v. Reichental, et al., Case No. 15-cv-03756-MGL, filed on September 18, 2015 in the United States District Court for the District of South Carolina (“Nally”); (5) Gee v. Hull, et al., Case No. BC-610319, filed on February 17, 2016 in the Superior Court for the State of California, County of Los Angeles (“Gee”); (6) Foster v. Reichental, et al., Case No. 0:16-cv-01016-MGL, filed on April 1, 2016 in the United States District Court for the District of South Carolina (“Foster”); (7) Lu v. Hull, et al., Case No. BC629730, filed on August 5, 2016 in the Superior Court for the State of California, County of Los Angeles (“Lu”); (8) Howes v. Reichental, et al., Case No. 0:16-cv-2810-MGL, filed on August 11, 2016 in the United States District Court for the District of South Carolina (“Howes”); and (9) Ameduri v. Reichental, et al., Case No. 0:16-cv-02995-MGL, filed on September 1, 2016 in the United States District Court for the District of South Carolina (“Ameduri”). Steyn and Piguing were consolidated into one action styled as In re 3D Systems Corp. Shareholder Derivative Litig., Lead Case No. 2015-CP-46-2225 in the Court of Common Pleas for the 16th Judicial Circuit, County of York, South Carolina. Gee and Lu were consolidated into one action styled as Gee v. Hull, et al., Case No. BC610319 in the Superior Court for the State of California, County of Los Angeles.  Nally, Foster, Howes, and Ameduri were consolidated into one action in the United States District Court for the District of South Carolina with Nally as the lead consolidated case. 



The derivative complaints allege claims for breach of fiduciary duty, abuse of control, gross mismanagement, waste of corporate assets and unjust enrichment and seek, among other things, monetary damages and certain corporate governance actions.

 

All of the derivative complaints listed above have been stayed until the earlier of the close of discovery or the deadline for appealing a dismissal in the KBC Asset Management NV securities class action.



The Company believes the claims alleged in the putative securities class action and the derivative lawsuits are without merit and intends to defend the Company and its officers and directors vigorously.

---

 



Ronald Barranco and Print3D Corporation v. 3D Systems Corporation, et. al.   

   

On August 23, 2013, Ronald Barranco, a former Company employee, filed two lawsuits against the Company and certain officers in the United States District Court for the District of Hawaii. The first lawsuit (“Barranco I”) is captioned Ronald Barranco and Print3D Corporation v. 3D Systems Corporation, 3D Systems, Inc., and Damon Gregoire, Case No. CV 13-411 LEK RLP, and alleges seven causes of action relating to the Company’s acquisition of Print3D Corporation (of which Mr. Barranco was a 50% shareholder) and the subsequent employment of Mr. Barranco by the Company. The second lawsuit (“Barranco II”) is captioned Ronald Barranco v. 3D Systems Corporation, 3D Systems, Inc., Abraham Reichental, and Damon Gregoire, Case No. CV 13-412 LEK RLP, and alleges the same seven causes of action relating to the Company’s acquisition of certain website domains from Mr. Barranco and the subsequent employment of Mr. Barranco by the Company.  Both Barranco I and Barranco II allege the Company breached certain purchase agreements in order to avoid paying Mr. Barranco additional monies pursuant to royalty and earn out provisions in the agreements. The Company and its officers timely filed responsive pleadings on October 22, 2013 seeking, inter alia, to dismiss Barranco I due to a mandatory arbitration agreement and for lack of personal jurisdiction and to dismiss Barranco II for lack of personal jurisdiction.

 

With regard to Barranco I, the Hawaii district court, on February 28, 2014, denied the Company’s motion to dismiss and its motion to transfer venue to South Carolina for the convenience of the parties. However, the Hawaii court recognized that the plaintiff’s claims are all subject to mandatory and binding arbitration in Charlotte, North Carolina. Because the Hawaii court was without authority to compel arbitration outside of Hawaii, the court ordered that the case be transferred to the district court encompassing Charlotte (the United States District Court for the Western District of North Carolina) so that court could compel arbitration in Charlotte. On April 17, 2014, Barranco I was transferred in to the Western District of North Carolina. Plaintiff filed a demand for arbitration on October 29, 2014. On December 9, 2014, the Company filed its answer to plaintiff’s demand for arbitration. On February 2, 2015, plaintiff filed an amended demand that removed Mr. Gregoire as a defendant from the matter, and on February 4, 2015 the Company filed its amended answer. The parties selected an arbitrator and arbitration took place in June 2015 in Charlotte, North Carolina.

 

On September 28, 2015, the arbitrator issued a final award in favor of Mr. Barranco with respect to two alleged breaches of contract and implied covenants arising out of the contract.  The arbitrator found that the Company did not commit fraud or make any negligent misrepresentations to Mr. Barranco. Pursuant to the award, the Company is to pay approximately $11,282, which includes alleged actual damages of $7,254, fees and expenses of $2,318 and prejudgment interest of $1,710. The Company disagrees with the single arbitrator’s findings and conclusions and believes the arbitrator’s decision exceeds his authority and disregards the applicable law. As an initial response, the Company filed a motion for modification on September 30, 2015, based on mathematical errors in the computation of damages and fees. On October 16, 2015, the arbitrator issued an order denying the Company’s motion and sua sponte issuing a modified final award in favor of Mr. Barranco in the same above-referenced amounts, but making certain substantive changes to the award, which changes the Company believes were improper and outside the scope of his authority and the American Arbitration Association rules. On November 20, 2015, the Company filed a motion to vacate the arbitration award in the federal court in the Western District of North Carolina.  Claimants also filed a motion to confirm the arbitration award. A hearing was held on the motions on June 29, 2016 in federal court in the Western District of North Carolina. The court requested supplemental briefing by the parties, which briefs were filed on July 11, 2016.

 

On August 31, 2016, the court issued an order granting in part and denying in part Plaintiff’s motion to confirm the arbitration award and for judgment, entering judgment in the principal amount of the arbitration award and denying Plaintiff’s motion for fees and costs.  The court denied the Company’s motion to vacate.  On September 7, 2016, Plaintiff filed a motion to amend the judgment to include prejudgment interest.  The Company opposed that motion and the parties submitted briefing, which is currently pending before the court. On September 28, 2016 the Company filed a motion to alter or amend the judgment.  Plaintiff opposed the motion and the parties submitted briefing.  On May 18, 2017, the court issued an opinion and order denying the Company’s motion to alter or amend and denying Plaintiff’s motion for prejudgment interest.  On June 16, 2017, the Company filed a notice of appeal with the United States Court of Appeals for the Fourth Circuit.  The appeal is pending.

 

Notwithstanding the Company’s right to appeal, given the arbitrator’s decision, the Company recorded an $11,282 expense provision for this matter in the quarter ended September 30, 2015. The provision is subject to adjustment based on the ultimate outcome of the Company’s appeal. If it is ultimately determined that money is owed following the full appellate process in federal court, the Company intends to fund any amounts to be paid from cash on hand. This amount has been classified as a long-term liability given the customary timeline of an appeals process. The Company will review this classification periodically.



With regard to Barranco II, the Hawaii district court, on March 17, 2014, denied the Company’s motion to dismiss and its motion to transfer venue to South Carolina. However, the Hawaii court dismissed Count II in plaintiff’s complaint alleging breach of the employment agreement.  The Company filed an answer to the complaint in the Hawaii district court on March 31, 2014.  On November 19, 2014, the Company filed a motion for summary judgment on all claims which was heard on January 20, 2015. On January 30, 2015, the court entered an order granting in part and denying in Part the Company’s motion for summary judgment. The Order narrowed the plaintiff’s claim for breach of contract and dismissed the plaintiff’s claims for fraud and negligent misrepresentation. As a result, Messrs.

---

 

Reichental and Gregoire were dismissed from the lawsuit. The case was tried to a jury in May 2016, and on May 27, 2016 the jury found that the Company was not liable for either breach of contract or breach of the implied covenant of good faith and fair dealing.  Additionally, the jury found in favor of the Company on its counterclaim against Mr. Barranco and determined that Mr. Barranco violated his non-competition covenant with the Company. On July 5, 2017, the court ordered a bench trial regarding causation and damages with respect to the equitable accounting on the Company’s prevailing counterclaim against Mr. Barranco and is expected to set a trial date.

 

The Company is involved in various other legal matters incidental to its business. Although the Company cannot predict the results of litigation with certainty, the Company believes that the disposition of all current legal matters will not have a material adverse effect on its consolidated results of operations, consolidated statement of cash flows or consolidated financial position. 

 

Indemnification



In the normal course of business, the Company periodically enters into agreements to indemnify customers or suppliers against claims of intellectual property infringement made by third parties arising from the use of the Company’s products. Historically, costs related to these indemnification provisions have not been significant, and the Company is unable to estimate the maximum potential impact of these indemnification provisions on its future results of operations.



To the extent permitted under Delaware law, the Company indemnifies its directors and officers for certain events or occurrences while the director or officer is, or was, serving at the Company’s request in such capacity, subject to limited exceptions. The maximum potential amount of future payments the Company could be required to make under these indemnification obligations is unlimited; however, the Company has directors and officers insurance coverage that may enable the Company to recover future amounts paid, subject to a deductible and the policy limits. There is no assurance that the policy limits will be sufficient to cover all damages, if any.





(15)  Accumulated Other Comprehensive Loss



The changes in the balances of accumulated other comprehensive loss by component are as follows:







For additional information about foreign currency translation, see Note 7.



(16)  Noncontrolling Interests



As of June 30, 2017, the Company owned approximately 70% of the capital and voting rights of Robtec, a service bureau and distributor of 3D printing and scanning products in Brazil. Robtec was acquired on November 25, 2014.



As of June 30, 2017, the Company owned approximately 65% of the capital and voting rights of Easyway, a service bureau and distributor of 3D printing and scanning products in China. Easyway was acquired on April 2, 2015. An additional 5% of the capital and voting rights were acquired on July 19, 2017 for $2.3 million.



Item 2.  Management’s Discussion and Analysis of Financial Condition and Results of Operations.



This discussion should be read in conjunction with the unaudited condensed consolidated financial statements and the notes thereto included in Item 1 (the “Financial Statements”) of this Quarterly Report on Form 10-Q (“Form 10-Q”). We are subject to a number of risks and uncertainties that may affect our future performance that are discussed in greater detail in the sections entitled “Forward-Looking Statements” at the end of this Item 2 and that are discussed or referred to in Item 1A of Part II of this Form 10-Q.

---

 



Business Overview



3D Systems Corporation (“3D Systems” or the “Company” or “we” or “us”) is a holding company incorporated in Delaware in 1993 that markets our products and services through subsidiaries in North America and South America (collectively referred to as “Americas”), Europe and the Middle East (collectively referred to as “EMEA”) and the Asia Pacific region (“APAC”). We provide comprehensive 3D printing solutions, including 3D printers, print materials, software, on-demand manufacturing services and digital design tools. Our solutions support advanced applications in a wide range of industries and key verticals including healthcare, aerospace, automotive and durable goods. Our precision healthcare capabilities include simulation, Virtual Surgical Planning (“VSP™”), and printing of medical and dental devices and surgical guides and instruments. 3D Systems has a 30 year history of experience and expertise which have proven vital to our development of an ecosystem that enables customers to optimize product designs, transform workflows, bring innovative products to market and drive new business models.



Customers can use our 3D solutions to design and manufacture complex and unique parts, eliminate expensive tooling, produce parts locally or in small batches and reduce lead times and  time to market. A growing number of customers are shifting from prototyping applications to also using 3D printing for production. We believe this shift will be further driven by our continued advancement and innovation of 3D printing solutions that improve durability, repeatability, productivity and total cost of operations.



Summary of Second Quarter 2017 Financial Results



Total consolidated revenue for the quarter ended June 30, 2017 increased by 0.8%, or $1.4 million, to $159.5 million, compared to $158.1 million for the quarter ended June 30, 2016. These results reflect an increase in materials and services revenue, partially offset by a decrease in products revenue, as further discussed below.



Healthcare revenue includes sales of products, materials and services for healthcare-related applications, including simulation, training and planning, 3D printing of surgical guides and instruments and medical and dental devices. For the quarter ended June 30, 2017, healthcare revenue increased by 25.0%, to $48.5 million, and made up 30.4% of total revenue, compared to $38.8 million, or 24.5% of total revenue for the quarter ended June 30, 2016. The increase in healthcare revenue reflects increased products and services sales coupled with the acquisition of Vertex.



For the quarter ended June 30, 2017, total software revenue from products and services increased by 9.1%, to $24.0 million, and made up 15.0% of total revenue, compared to $22.0 million, or 13.9% of total revenue for the quarter ended June 30, 2016.



As of June 30, 2017 and December 31, 2016, our backlog was $32.4 million and $31.7 million, respectively. Production and delivery of our printers is generally not characterized by long lead times; backlog is more dependent on timing of customers’ requested deliveries. In addition, on-demand manufacturing services lead time and backlog depends on whether orders are for rapid prototyping or longer-range production runs. As of June 30, 2017, backlog included $9.6 million of on-demand manufacturing service orders, compared to $9.2 million at December 31, 2016.



Gross profit for the quarter ended June 30, 2017 increased by 0.3%, or $0.3 million, to $80.7 million, compared to $80.4 million for the quarter ended June 30, 2016. Gross profit margin for the quarters ended June 30, 2017 and 2016 was 50.6% and 50.9%, respectively.



Operating expenses for the quarter ended June 30, 2017 increased by 4.1%, or $3.4 million, to $87.5 million, compared to $84.1 million for the quarter ended June 30, 2016, primarily from a 17% increase in R&D investments. Our operating loss for the quarter ended June 30, 2017 was $6.9 million, compared to an operating loss of $3.7 million for the quarter ended June 30, 2016.



For the six months ended June 30, 2017 and 2016, we generated $18.4 million and $31.0 million of cash from operations, respectively, as further discussed below. In total, our unrestricted cash balance at June 30, 2017 and December 31, 2016 was $154.0 million and $184.9 million, respectively.



---

 

Results of Operations



Comparison of revenue by class



We earn revenues from the sale of products, materials and services. The products category includes 3D printers, healthcare simulators and digitizers, as well as software, 3D scanners and haptic devices. The materials category includes a wide range of print materials to be used with our 3D printers, the majority of which are proprietary, as well as acquired conventional dental materials. The services category includes warranty and maintenance on 3D printers and simulators, software maintenance, on-demand manufacturing solutions and healthcare services.

  

Due to the relatively high price of certain 3D printers and a corresponding lengthy selling cycle and relatively low unit volume of the higher priced printers in any particular period, a shift in the timing and concentration of orders and shipments from one period to another can affect reported revenue in any given period. Revenue reported in any particular period is also affected by timing of revenue recognition under rules prescribed by U.S. generally accepted accounting principles (“GAAP”).

  

In addition to changes in sales volumes and the impact of revenue from acquisitions, there are two other primary drivers of changes in revenue from one period to another: (1) the combined effect of changes in product mix and average selling prices, sometimes referred to as price and mix effects, and (2) the impact of fluctuations in foreign currencies. As used in this Management’s Discussion and Analysis, the price and mix effects relate to changes in revenue that are not able to be specifically related to changes in unit volume.



Table 1 and Table 2 below set forth change in revenue by class for the quarter and six months ended June 30, 2017, respectively:



Table 1





Total consolidated revenue increased by 0.8%, primarily driven by an increase in materials and service volume, partially offset by the impact of foreign currency. Materials and service volumes increased primarily due to higher healthcare revenue and the impact of the acquisition of Vertex Global in the first quarter of 2017.



For the quarters ended June 30, 2017 and 2016, printer revenue included in the products category contributed $27.7 million and $32.3, respectively. Software revenue included in the products category, including scanners and haptic devices, contributed $12.8 million and $11.1 million, respectively.



The increase in materials revenue primarily reflects increased demand for materials driven by increased utilization by the installed base and higher healthcare revenue, including the addition of Vertex and NextDent materials, both included in the Vertex Global acquisition. 



The increase in services revenue reflects increased demand for healthcare services and printer services, which were partially offset by a decrease in on-demand manufacturing services. For the quarter ended June 30, 2017, services revenue from on-demand manufacturing services decreased 4.9% to $25.8 million, compared to $27.1 for quarter ended June 30, 2016. For the quarters ended June 30, 2017 and 2016, software services contributed $11.2 million and $10.9 million, respectively.

---

 



Table 2





Total consolidated revenue increased by 1.7%, primarily driven by an increase in materials and service volume, partially offset by lower products revenue and negative foreign currency impact. Materials and service volumes increased primarily due to higher demand from healthcare and industrial customers, and the addition of Vertex Global in the first quarter of 2017.



For the six months ended June 30, 2017 and 2016, printer revenue included in the products category contributed $59.1 million and $65.2 million, respectively. Software revenue included in the products category, including scanners and haptic devices, contributed $22.6 million and $20.9 million, respectively.



The increase in materials revenue primarily reflects increased demand for materials from healthcare and industrial customers in addition to the acquisition of Vertex and NextDent dental materials.  



The increase in services revenue reflects increased demand for healthcare services and printer services, which were partially offset by a decrease in on-demand manufacturing services. For the six months ended June 30, 2017, services revenue from on-demand manufacturing services decreased 5.6% to $50.9 million, compared to $53.9 million for quarter ended June 30, 2016. For the six months ended June 30, 2017 and 2016, software services contributed $21.8 million and $21.3 million, respectively. 



Comparison of revenue by geographic region



Table 3 and Table 4 below set forth change in revenue by geographic area for the quarter and six months ended June 30, 2017, respectively:



Table 3





Revenue in the Americas has remained relatively flat for the quarter ended June 30, 2017 as compared to the quarter ended June 30, 2016. The increase in revenue in the EMEA region primarily reflects higher sales volumes, primarily driven by Vertex and production printer sales, partially offset by the negative impact of foreign currency. The decrease in revenue in the Asia Pacific region primarily reflects a decrease in printers and materials in addition to the impact of foreign currency.



For the quarters ended June 30, 2017 and 2016, revenue from operations outside the U.S., including Latin America, EMEA and APAC, was 49.3% and 51.7% of total revenue, respectively.



---

 

Table 4





The decrease in revenue in the Americas region primarily reflects lower sales of 3D printers and on-demand manufacturing services, partially offset by increased healthcare-related solutions. The increase in revenue in the EMEA region primarily reflects increased sales volumes of materials, primarily driven by the acquisition of Vertex, partially offset by the impact of foreign currency. The decrease in revenue in the Asia Pacific region primarily reflects lower demand for printers as well as negative impact of mix. For the six months ended June 30, 2017 and 2016, revenue from operations outside the U.S., including Latin America, EMEA and APAC, was 49.7% and 50.7% of total revenue, respectively.



Gross profit and gross profit margins



Table 5 and Table 6 below set forth gross profit and gross profit margin for the quarters and six months ended June 30, 2017 and 2016, respectively:



Table 5







Total consolidated gross profit remained relatively flat for the quarter ended June 30, 2017 as compared to the quarter ended June 30, 2016. Gross profit margin for products decreased, primarily due to an unfavorable impact from sales mix. Gross profit margin for materials decreased primarily due to the impact of the addition of Vertex conventional dental materials. Gross profit margin for services increased slightly, primarily driven by higher other services margins, partially offset by lower on-demand manufacturing services margins. On-demand manufacturing services gross profit margin decreased to 46.0% for the quarter ending June 30, 2017 as compared to 46.9% for the quarter ended June 30, 2016.



Table 6





The increase in total consolidated gross profit was primarily driven by higher materials and services gross profit. Gross profit margin for products increased, primarily due to changes in product mix. Gross profit margin for materials decreased, primarily due to the addition of Vertex conventional dental materials. Gross profit margin for services decreased slightly, primarily driven by lower printer services margins, partially offset by increased on-demand manufacturing services margins. On-demand manufacturing services gross profit margin increased to 44.7% for the six months ended June 30, 2017, compared to 44.4% for the six months ended June 30, 2016.



---

 

Operating expenses



Table 7 and Table 8 below set forth components of operating expenses for the quarters and six months ended June 30, 2017 and 2016, respectively:



Table 7







Total operating expenses increased 4.1%, resulting from an increase in research and development expenses. The increase in research and development expense was primarily due to investment in Figure 4, metals and materials, including additional talent and resources.    



Table 8





Total operating expenses decreased 0.9%, reflecting lower selling, general and administrative expenses, partially offset by higher research and development expenses. Selling, general and administrative expenses decreased primarily due to a decrease in compensation costs driven by lower stock based compensation expense and a decrease in bad debt expense partially offset by an increase in repairs and maintenance. The increase in research and development expenses was primarily due to investment in Figure 4, metals and materials, including additional talent and resources.



Loss from operations



Table 9 below sets forth operating loss by geographic area for the quarters and six months ended June 30, 2017 and 2016, respectively:



Table 9











The loss from operations increased $3.2 million for the quarter ended June 30, 2017, as compared to the quarter ended June 30, 2016, while the loss from operations decreased $4.6 million for the six months ended June 30, 2017, as compared to the six months ended June 30, 2016. The operating loss changes were primarily driven by changes in gross profit and operating expenses. See “Gross profit and gross profit margins” and “Operating expenses” above.



With respect to the Americas, for the quarter and six months ended June 30, 2017, as compared to the same periods of 2016, operating losses increased reflecting modest decreases in revenue along with increased expenses. The Americas region also contains a significant portion of our corporate costs, which negatively impacts profitability compared to the other regions. Operating losses for the regions are also impacted by our transfer pricing policies on intercompany transactions between the regions.



The improvements in operating results for the EMEA region in the quarter and six months ended June 30, 2017, as compared to the same periods of 2016, primarily reflect increased revenue, including the acquisition of Vertex Global, partially offset by the negative impact from foreign currency.

---

 



The modest decrease in losses from operations for the quarter and six months ended June 30, 2017, as compared to the same periods of 2016, in the Asia Pacific region reflect decreases in revenues offset by corresponding decreases in expenses, partially offset by the negative impact from foreign currency.



Interest and other income, net



Table 10 below sets forth components of interest and other (income) expense, net, for the quarters and six months ended June 30, 2017 and 2016, respectively:



Table 10





Net loss



Table 11 and Table 12 below set forth components of net loss attributable to 3D Systems for the quarters and six months ended June 30, 2017 and 2016, respectively:



Table 11







Table 12





---

 



Liquidity and Capital Resources



Table 13









We assess our liquidity in terms of our ability to generate cash to fund our operating, investing and financing activities. In doing so, we review and analyze our current cash on hand, the number of days our sales are outstanding, inventory turns, capital expenditure commitments and accounts payable turns. Our cash requirements primarily consist of funding of working capital and funding of capital expenditures.



We believe our existing cash and cash equivalents will be sufficient to satisfy our working capital needs, capital expenditures, outstanding commitments and other liquidity requirements associated with our existing operations in the foreseeable future, or to consummate significant acquisitions of other businesses, assets, products or technologies. However, it is possible that, in the future, we may need to raise additional funds to finance our activities. If needed, we may be able to raise such funds by issuing equity or debt securities to the public or selected investors, by borrowing from financial institutions, drawing down on our credit facility, or selling assets.



Cash held outside the U.S. at June 30, 2017 was $95.2 million, or 61.9% of total cash and equivalents, compared to $83.5 million, or 45.2% of total cash and equivalents at December 31, 2016. Cash held outside the U.S. is used in our foreign operations for working capital purposes and is considered to be permanently invested; consequently, we have not provided for any taxes on repatriation. Cash equivalents comprise funds held in money market instruments and are reported at their current carrying value, which approximates fair value due to the short term nature of these instruments. We strive to minimize our credit risk by investing primarily in investment grade, liquid instruments and limit exposure to any one issuer depending upon credit quality. See Cash flow, Credit facilities and Capitalized lease obligations below.



Days’ sales outstanding was 72 days at June 30, 2017 compared to 70 days at December 31, 2016 and accounts receivable more than 90 days past due decreased to 10.7% of gross receivables, from 12.5% at December 31, 2016. We review specific receivables periodically to determine the appropriate reserve for accounts receivable.



The majority of our inventory consists of finished goods, including products, materials and service parts. Inventory also consists of raw materials and spare parts for the in-house assembly and support service products. We outsource the assembly of certain 3D printers; therefore, we generally do not hold most parts for the assembly of these printers in inventory.



The changes that make up the other components of working capital not discussed above arose in the ordinary course of business. Differences between the amounts of working capital item changes in the cash flow statement and the balance sheet changes for the corresponding items are primarily the result of foreign currency translation adjustments.



---

 

Cash flow



Table 14 summarizes the cash provided by (used in) operating activities, investing activities and financing activities, as well as the effect of changes in foreign currency exchange rates on cash, for the six months ended June 30, 2017 and 2016:



Table 14







Cash flow from operating activities



Table 15 summarizes the components of cash provided by operating activities for the six months ended June 30, 2017 and 2016:



Table 15







Net cash provided by operating activities for the six months ended June 30, 2017 was $18.4 million. Excluding non-cash charges, net income provided $25.7 million of cash. Non-cash charges primarily consist of depreciation, amortization and stock-based compensation. Working capital requirements used $7.3 million. The primary driver of the working capital outflow related to inventory of $9.8 million, accrued and other current liabilities of $6.7 million and other operating activities of $6.2 million. These amounts were partially offset by a decrease in accounts receivable of $5.5 million and an increase in deferred revenue of $8.0 million. Differences between the amounts of working capital item changes in the cash flow statement and the balance sheet changes for the corresponding items are primarily the result of foreign currency translation adjustments.



Cash flow from investing activities



Table 16 summarizes the components of cash used in investing activities for the six months ended June 30, 2017 and 2016:



Table 16





Net cash used in investing activities for the six months ended June 30, 2017 was $47.5 million. The primary driver of the outflow related to the acquisition of Vertex, which we acquired for an aggregate purchase price of $34.3 million, net of cash acquired. Property, plant and equipment expenditures totaled $11.2 million for leasehold improvements, including expanding facilities and investing in infrastructure, equipment to support our on-demand manufacturing service and printers associated with new product development efforts.

---

 



Cash flow from financing activities



Table 17 summarizes the components of cash used in financing activities for the six months ended June 30, 2017 and 2016:



Table 17





Net cash used by financing activities for the six months ended June 30, 2017 was $5.5 million. The primary driver of the outflow related to the payment of $3.2 million in earnout consideration.



Contractual commitments and off-balance sheet arrangements



Credit facilities



In October 2014, we entered into a $150.0 million five-year revolving, unsecured credit facility. The agreement provides for advances in the initial aggregate principal amount of up to $150.0 million. Subject to certain terms and conditions contained in the agreement, we may, at our option, request an increase in the aggregate principal amount available under the credit facility by an additional $75.0 million. As of June 30, 2017 and December 31, 2016, there was no outstanding balance on the credit facility. Based on current financial covenant limitations at June 30, 2017, availability on the credit facility would be approximately $150.0 million. Future results may impact availability. See Note 8 to the condensed consolidated financial statements.



Capitalized lease obligations



Our capitalized lease obligations include a lease agreement that we entered into during 2006 with respect to our Rock Hill, SC facility, in addition to other lease agreements assumed through acquisitions.  In accordance with ASC 840, “Leases,” we are considered an owner of the properties, therefore, we have recorded these amounts in our consolidated balance sheet with a corresponding capitalized lease obligation in the liabilities section of the consolidated balance sheet. Our outstanding capitalized lease obligations carrying value at June 30, 2017 and December 31, 2016 was $8.0 million and $8.2 million, respectively.





Other contractual arrangements



We lease certain of our facilities and equipment under non-cancelable operating leases. For the quarters ended June 30, 2017 and 2016, rent expense under operating leases was $3.8 million and $3.3 million, respectively.



Certain of our acquisition purchase agreements contain earnout payment provisions under which the sellers of the acquired businesses can earn additional amounts. The total amount of liabilities recorded for these earnouts is $8.1 million and $10.8 million at June 30, 2017 and December 31, 2016, respectively.



Off-balance sheet arrangements



We have no off-balance sheet arrangements and do not utilize any “structured debt,” “special purpose,” or similar unconsolidated entities for liquidity or financing purposes.



Recent Accounting Pronouncements



Our critical accounting policies are disclosed in our 2016 Annual Report on Form 10-K and Note 1 of our condensed consolidated financial statements. The only change to our critical accounting policies during the six months ended June 30, 2017 was a modification to the way in which we account for forfeitures of share-based awards. Specifically, beginning in the first quarter of 2017, we recognize forfeitures of share-based awards as they occur in the period of forfeiture rather than estimating the number of awards expected to be forfeited at the grant date and subsequently adjusting the estimate when awards are actually forfeited. This change did not have a material impact on our results of operations in the current period, and is not expected to have a material impact on results of operations in subsequent periods

---

 



Critical Accounting Policies and Significant Estimates



For a discussion of our critical accounting policies and estimates, refer to “Management’s Discussion and Analysis of Financial Condition and Results of Operations – Critical Accounting Policies and Significant Estimates” in our Annual Report on Form 10-K for the year ended December 31, 2016 (“Form 10-K”).



Forward-Looking Statements



Certain statements made in this Form 10-Q that are not statements of historical or current facts are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause our actual results, performance or achievements to be materially different from historical results or from any future results expressed or implied by such forward-looking statements.  In many cases, you can identify forward-looking statements by terms such as “believes,” “belief,” “expects,” “estimates,” “intends,” “anticipates,” or “plans” or the negative of these terms or other comparable terminology.



Forward-looking statements are based upon management’s beliefs, assumptions and current expectations concerning future events and trends, using information currently available, and are necessarily subject to uncertainties, many of which are outside our control.  Although we believe that the expectations reflected in the forward-looking statements are reasonable, forward-looking statements are not, and should not be relied upon as a guarantee of future performance or results, nor will they necessarily prove to be accurate indications of the times at or by which any such performance or results will be achieved. A number of important factors could cause actual results to differ materially from those indicated by the forward-looking statements. These factors include without limitation:





Certain of these and other factors are discussed in more detail in “Item 1A. Risk Factors” of our Form 10-K. Readers are cautioned not to place undue reliance on these forward-looking statements.  The forward-looking statements included herein are made only as of the date of this Form 10-Q and we undertake no obligation to publicly update or review any forward-looking statement made by us or on our behalf, whether as a result of new information, future developments, subsequent events or circumstances or otherwise. All subsequent written or oral forward-looking statements attributable to us or individuals acting on our behalf are expressly qualified in their entirety by the cautionary statements referenced above.



---

 

Item 3.  Quantitative and Qualitative Disclosures about Market Risk.



For a discussion of market risks at December 31, 2016, refer to Item 7A, “Quantitative and Qualitative Disclosures about Market Risk,” in our Form 10-K. During the first six months of 2017, there were no material changes or developments that would materially alter the market risk assessment performed as of December 31, 2016.



Item 4.  Controls and Procedures.



Evaluation of disclosure controls and procedures



As of June 30, 2017, we carried out an evaluation, under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer, of the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) of the Securities Exchange Act of 1934, as amended (the “Exchange Act”)) pursuant to Rules 13a-15 and 15d-15 under the Exchange Act. These controls and procedures were designed to provide reasonable assurance that the information required to be disclosed in the reports that we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms and that such information is accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, in a manner to allow timely decisions regarding required disclosures. Based on this evaluation, including an evaluation of the rules referred to above in this Item 4, management has concluded that our disclosure controls and procedures were effective as of June 30, 2017 to provide reasonable assurance that the information required to be disclosed in the reports we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms and that such information is accumulated and communicated to management, including our Chief Executive Officer and Chief Financial Officer, in a manner to allow timely decisions regarding required disclosures.



Changes in Internal Controls over Financial Reporting



There were no material changes in our internal controls over financial reporting during the period covered by this Form 10-Q that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.







PART II — OTHER INFORMATION



Item 1.  Legal Proceedings.



The information set forth in “Litigation” in Note 14 – Commitments and Contingencies to the Financial Statements in Part I, Item 1 of this Form 10-Q is incorporated herein by reference.



Item 1A.  Risk Factors.



There have been no material changes from the risk factors as previously disclosed in our Form 10-K.



Item 2. Unregistered Sales of Equity Securities and Use of Proceeds.



Recent Issuances of Unregistered Securities

 

None.

---

 



Issuer Purchases of Equity Securities 

 

We did not repurchase any of our equity securities during the quarter or six months ended June 30, 2017, except for unvested restricted stock awards repurchased or forfeited pursuant to our 2004 and 2015 Incentive Stock Plans.









Item 6.  Exhibits.  







* Management contract or compensatory plan or arrangement

---

 



SIGNATURE



Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.









Date: August 2, 2017



---